Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Selecting Your Cylinder Size

◀ 1 798081828384858687 109 ▶

Originally Posted by gprent
What you want to do is start your session with the 1.5 and after you pack it, switch over to the 1.75 and continue with your session.

I’m assuming you’d switch from the smaller one to the bigger one to capitalize on both length and girth. I’m packing the 1.75” diameter tube and have switched to a 2” tube for girth. But if I can get both length and girth by switching tubes, that would be awesome!

Starting: 5.5” BPEL, 5" girth

Current: 6.75” BPEL, girth: 5.25”

Goal: 7" BPEL, 5.5" girth

Uneven Lymph Buildup

I tried searching but didn’t get a definitive answer. When I pump, I get a decent plumpness everywhere except the base of my penis. It seems like bottom half inch is unaffected by pumping. Does this mean my cylinder is too big? I’m guessing it happens because too much scrotum and fat pad are being pulled into the cylinder.

Gprent You have definitely save me a lot of time with this thread thanks

Start 6 1/2 L - 4 3/4 G

Now 7 15/16 L - 5 3/8G

Goal 8.0 L - 6.0 G

Am Doing Something Wrong?

My measurements are 6.75 NBPEL 4.75-5 BEG

I went with a 2.0 cylinder , which is the size up from the one I should get since I want to gain girth , however my first time pumping with water , my penis went back to normal size immediately after. Even though I had a good pumping session.

Also should I get a pack of Grifti bands to use as a cock ring while pumping ?

I can’t seem to locate the thread, it could have been this one but to the member who informed me of the proper cylinder size I should be using I say thank you. Got my new pump. I went with a pump this member recommended & I am more than pleased. There’s a lot of info & knowledge to be shared & gained here. Trust your brothers before you. They have made the errors & learned from them. I have as well. When it comes to pumping it’s said proper cylinder size is #1. Never did I know just how urgent it was to have the right size tube. I do know now & I’ll tell all of you at the beginning of this thread is a chart. Check it to ensure your in the proper cylinder. So many thanks for the insight.

Originally Posted by Trust11
My measurements are 6.75 NBPEL 4.75-5 BEG

I went with a 2.0 cylinder , which is the size up from the one I should get since I want to gain girth , however my first time pumping with water , my penis went back to normal size immediately after. Even though I had a good pumping session.

Also should I get a pack of Grifti bands to use as a cock ring while pumping ?

How long are you pumping for? How much pressure do you use? For right now, it would also be good to just air pump as it is so much easier to set up and get going.

Generally speaking, the more experience you get from a consistent routine, plus extending your continuous time in the cylinder up to 30 minutes, the longer your post pump result will last. In order to get up to 30 minutes continuous time in the cylinder, you have to take your time and slowly begin having longer and longer sessions.

The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.

This is a great thread. I ordered a LA Pump 1.75 x 9 a couple of weeks ago. I was right on the cusp at 5.75 at base girth, so I pack the cylinder. I have ordered a 2” tube so I can also gain a little girth. I guess I’ll be starting my 2 x 10 min session with the 1.75 and switch to the 2.0 for the second half. Length or Girth, I guess I should make my mind up.

Forgot to answer the question about Grifti bands. Yes I would recommend buying the 2” bands and you can use them either while pumping, or after pumping to hold your post pump size and then edging to enjoy your post pump size even more.

The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.

Originally Posted by gprent
Selecting the proper cylinder size is important for making your pumping sessions both comfortable and rewarding. Your cylinder should be large enough to allow for significant expansion, but not so large as to make it easy for your testicles to be drawn into the cylinder by the vacuum.

When selecting length, choose a cylinder that is between 2 and 3 inches longer then your bone pressed erect length.

For selecting diameter, use the table below.

<table class=”tborder” cellpadding=”4” cellspacing=”1” border=”0” align=”center” width=”50%” style=”text-align: center”><tr><td class=”tcat”><strong>Base Girth</strong></td><td class=”tcat”><strong>Cylinder Diameter</strong></td></tr><tr><td class=”alt1”>3.50 to 4.50*</td><td class=”alt1”>1.50</td> </tr><tr><td class=”alt2”>4.75 to 5.25*</td><td class=”alt2”>1.75</td></tr><tr><td class=”alt1”>5.50 to 6.00*</td><td class=”alt1”>2.00</td></tr><tr><td class=”alt2”>6.25 to 6.75*</td><td class=”alt2”>2.25</td></tr><tr><td class=”alt1”>7.00 to 7.50*</td><td class=”alt1”>2.50</td></tr><tr><td class=”alt2”>7.75 to 8.25*</td><td class=”alt2”>2.75</td></tr></table>

*If you are at the upper limit and are going for length, select the cylinder diameter straight across in the table. If you are at the upper limit and are going for girth, select the next cylinder size up. Example: Your base girth measures 5.25. If your goal is length, select the 1.75 cylinder. If your goal is girth, select the 2.0 cylinder.

This is a good thread. Just to be clear at 5.4 inch BEG of I want to increase girth I go up to 2 inch diameter. If it is length then it is 1.75 inch diameter cylinder. Oh the dilemma!

Originally Posted by Willy D
This is a good thread. Just to be clear at 5.4 inch BEG of I want to increase girth I go up to 2 inch diameter. If it is length then it is 1.75 inch diameter cylinder. Oh the dilemma!

You got it, but there is one more consideration. For the cylinder that will last longest before outgrowing it, go for the 2.0.

The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.

Originally Posted by gprent
You got it, but there is one more consideration. For the cylinder that will last longest before outgrowing it, go for the 2.0.


Doh!!

I had ordered the 2.0 but changed to 1.75 as I had read more threads and people had said they saw more gains from a more compact fit!

I went by the suggested size on the chart for length. To my surprise I’m able to pack it 1/3-1/2. I’ll be pleased if I get the length I going for. I went with the 2” and wondering when the time comes should I go to 2.125 or 2.25?

Originally Posted by bigdog1199
I went by the suggested size on the chart for length. To my surprise I’m able to pack it 1/3-1/2. I’ll be pleased if I get the length I going for. I went with the 2” and wondering when the time comes should I go to 2.125 or 2.25?

Where did you find a 2.125? I am only aware of ¼” increments.

The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.

Originally Posted by Willy D
Doh!!

I had ordered the 2.0 but changed to 1.75 as I had read more threads and people had said they saw more gains from a more compact fit!



I’m 5.75” - 6” at BEG and 5.5” MEG and I went with a 1.75” but I had to upsize to a 2” almost immediately. I felt the 1.75” was too small. I filled the whole tube up to 1/2” below the glands once I got it up to 5Hg or greater. Now I’ve got both!

Originally Posted by gprent

Where did you find a 2.125? I am only aware of ¼” increments.

LeLuv has them on their website and on Ebay. That is the only one in 1/8” at least for now.

Top
◀ 1 798081828384858687 109 ▶

All times are GMT. The time now is 10:00 PM.