It slips !

Dear Bib !
Since 3 days I have a problem : when I put on the hanger , it always slips to the head !
I tightened it so sstrong , that even my fingers hurt , but it still slips, even in different positions !
Did someone obseve this before ?
I wonder why this is like this suddenly ! I am jelqing about 1 hour before . Could the slippery be from the fluffiness from the cock ?But yesterday I didn “t jelq and had the same problems .

Thanks a lot for help Wantmore
BY the way , I increased weight , but if I tighten the hanger well , this should not be the problem , shouldn ´t it ?

Wantmore,

It was fine, then you went up in weight, then it started slipping again? Give more info. What is the spacing on the bottom adjustments? What do you mean by “tighten till your fingers hurt”? Are the teeth on top meshed completely? How much are you wrapping? Can you tighten any more after applying the weight? How much weight are you hanging and how much did you move up?

Bigger

Dear Bib !

Thanks for your help !

I started with 1 kg more some days ago ( from2,5 kg to 3,5 kg ). The first day it was fine with no slippery and then it suddenly starts ., before that I had never any problems. I use some mull before I apply Theraband (12 inches long and 2,4 wide ).

What do you mean by spacing of bottom adjustments ? On the bottom I close the hanger totally .

My fingers hurt , because I tightene it more than before all this slippery . It could be , that it could be tightened more on top ., I never tried to tighten more after applieing the weight . I did this before.

Thanks a lot wantmore

Did you read Bib’s web page he has a product guide that explains almost everything. check it out I think it will help too.

John

Thanks a lot Johnnygate !

And Bib , I have another question about the fatiguing feeling you should have . Is it the same , when you don “ t get an erection as easly as normal after a hanging session and does it mean also that you have a special feeling in your inner cock ( not the skin )when massaging it like after a bodybuildingsession , when you massage your cock , it doesn´´t hurt , but you feel the inner in an other way than normally . Sorry , but it is difficult for my Englisch to describe
I hope you understand what I mean
Thanks wantmore

Wantmore,

First, I would jelq only after hanging for the day. Jelqing caused me a lot of problems with hanging if I did it first. Light milking with little pressure and little erection is ok.

>What do you mean by spacing of bottom adjustments ? On the bottom I close the hanger totally . <

Look on the product guide. There are two sets of hex nuts within the skids on the bottom. Do not loosen the nuts next to the hinge! The second set of nuts, one on front and one on the back are the adjustment. They should be ‘out’ at least a little. You want the top gap to be a little less than the bottom gap. You may have to wrap with a little more material to get a little more girth. The WING nuts on the outside of the right skid should be snug at all times, whatever the adjustment, but you do not have to tighten a lot.

>My fingers hurt , because I tightene it more than before all this slippery . It could be , that it could be tightened more on top ., I never tried to tighten more after applieing the weight . I did this before. <

Your fingers should not hurt. You may break the hanger. Are the teeth together on top?

>fatiguing feeling you should have . Is it the same , when you don “ t get an erection as easly as normal after a hanging session and <

Yes, it is normal for erections to be a little more difficult after hanging. This is because of the fatigue. However, within a few hours, it should be normal.

>does it mean also that you have a special feeling in your inner cock ( not the skin )when massaging it like after a bodybuildingsession , when you massage your cock , it doesn´´t hurt , but you feel the inner in an other way than normally<

Yes, this is the fatigued feeling. The way I describe it is the same feeling as after a weight lifting session.

Bigger

Dear Bib !

Thanks a lot !

I always had difficulties with the fatigued feeling , now I know what it is !

Yes , the teeth on top are together . I´ll add some wrap for more girth , perhaps this is the clue , because I added more weight .

Have a nice weekend

wantmore

Hey bib or any advanced hangers can you maybe give me an estimated guess on how the adjustment bolts should be set if my wfg wrap girth is a 5” need help please I’m now packaging after failed.

I’m no expert but my bib starter has about a half inch gap on bottom and teeth on top are nearly meshed. My WFG is a little over 5” .

From what I’ve learned so far, that doesn’t necessarily mean that will work for you, everybody’s different. But it might give you a place to start.

Your hanger should also look like this: \ / with the toe out being the front of the hanger. Mine is probably 3/4 inch apart at the front and 1/2 inch apart in the rear.

Does your shape determine your toe in/toe out adjustment? I’ve struggled with this too.

I think I am toe out also. I think I just experimented with it and found one to be more comfortable. No idea on the bottom hex nut length out. It just takes a while to tweak and try to find what works.

Basically I just kept tweaking until it get comfortable. It is a little frustrating in the beginning but once you find something that works you only do minor tweaks afterwards.

Thanks guys and how do I start my own post I tried to start one but I seem to be having a problem lol and my apologize ( wantmore ) for invading your post

I have actually found that the it HAS to be like \ / or else you will have issues even getting it to close with the top bolt. Although I have been able to use it looking like | | as well. when I tried the hanger like / \ I was unable to close the hanger with the top bolt.

So let me this right before tightening the hanger down make sure its 1” behind the wrap so that it can grab the internal structure? When the hanger is almost tight that is when you pulse push just a little as you tighten down the hanger ? 2nd & 3rd set you don’t have to pulse push just tighten the hanger down ?