The big penis and mens' sexual health source, increasing penis size around the world.
Whats your base girth?This pump have more than 2.6” diameter.
I think is too big
That was the first thing I thought about this pump it’s way big. I use a 2 inch tube now and wish it was about an 1/8 smaller.
[QUOTE=raybbaby]
Any time you’re introducing something new, go easy. Don’t throw 3 sets of clamping in before your usual pump session. This said, I would clamp before pumping.
[/QUOTE
Absolutely Ray, I did go too hard the first couple times and my dick was exhausted that night. I still had sex but it wasn’t as good as it could have been.
It doesn’t look like they are measuring it right. (Size：15.5*8*23.5cm) ? From the photo, the increments on the cylinders are 20cm you can see that beyond that, the body of the pump fits in it with an orange o-ring. If it was 23.5 cm (insertable), I would like to see clearly through the cylinder to know what is happening to my tip. I’m not sure if it is 2.6” in diameter though. Where do you get that from?
Originally Posted by Celtíbero 92Whats your base girth?
This pump have more than 2.6” diameter.
I think is too big
My current dimensions: flaccid: 8" x 6.5" erect: 9.5" x 7.125" glans: soft length:1.825" soft diameter 1.65" firm length:2.286" firm diameter:1.90"
Goal: flaccid: 9" x 7" (.1" length .5" girth) erect: 10" x 8" ( .5" length 1" girth) glans: soft length: 2.25" soft diameter: 2" firm length: 2.5" firm diameter: 2.25"
Ultimate goal: flaccid: 10" x 8" erect: 11.5" x 9.75" glans: soft length: 2.5" soft diameter: 2.25" firm length: 4" firm diameter: 3" In other words: A big, fat elephant cock!
It doesn’t look like they are measuring it right. (Size：15.5*8*23.5cm) ? From the photo, the increments on the cylinders are 20cm you can see that beyond that, the body of the pump fits in it with an orange o-ring. If it was 23.5 cm (insertable), I would like to see clearly through the cylinder to know what is happening to my tip. I’m not sure if it is 2.6” in diameter though. Where do you get that from?
15.5/3.14 = 4.9cm diameter. 2 inch +- diameter tube i think.. And 23 cm is the total length. 20 cm is the insertable i think.
15.5/3.14 = 4.9cm diameter. 2 inch +- diameter tube i think.. And 23 cm is the total length. 20 cm is the insertable i think.
I think: 15.5/2.54 = 6.1 inch insertable length
8/2.54 = 3.2 inch diameter
23/2.54 = 9 inch total length
The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.
It doesn’t look like they are measuring it right. (Size：15.5*8*23.5cm) ? From the photo, the increments on the cylinders are 20cm you can see that beyond that, the body of the pump fits in it with an orange o-ring. If it was 23.5 cm (insertable), I would like to see clearly through the cylinder to know what is happening to my tip. I’m not sure if it is 2.6” in diameter though. Where do you get that from?
There are others selling them on ebay with exact numbers. I posted the first link that came up. If I remember right it was 2.5 but can’t remember the lenght.
There are others selling them on ebay with exact numbers. I posted the first link that came up. If I remember right it was 2.5 but can’t remember the lenght.
This link shows the length and diameter dimensions if you scroll down a bit: Total length is 30cm and diameter is 7.3cm or 2.9 inches. (Very large)
The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.
There are others selling them on ebay with exact numbers. I posted the first link that came up. If I remember right it was 2.5 but can’t remember the lenght.
Yeah, I’ve seen many of these online and I disregard them due to not enough insertable length. If the inside diameter is 2.5 though, that is mighty large! I have a beer can that is 2.5” and that is not one of the skinny ones either! It measures 8.25” circumference. Has anyone seen a dick that big? I have a 2.5” cylinder that is long enough but the base 3-4” packing the cylinder is expanding too much! I prefer a 2.25” cylinder.
My current dimensions: flaccid: 8" x 6.5" erect: 9.5" x 7.125" glans: soft length:1.825" soft diameter 1.65" firm length:2.286" firm diameter:1.90"
Goal: flaccid: 9" x 7" (.1" length .5" girth) erect: 10" x 8" ( .5" length 1" girth) glans: soft length: 2.25" soft diameter: 2" firm length: 2.5" firm diameter: 2.25"
Ultimate goal: flaccid: 10" x 8" erect: 11.5" x 9.75" glans: soft length: 2.5" soft diameter: 2.25" firm length: 4" firm diameter: 3" In other words: A big, fat elephant cock!
This link shows the length and diameter dimensions if you scroll down a bit: Total length is 30cm and diameter is 7.3cm or 2.9 inches. (Very large)
Holy shit! Didn’t see that. Ok this definitely not something I’d be interested in. Could you imagine the fluid build up? Good idea bad despite.
Those vendor should need to start to put the information in a proper way… ahah
I think the dimensions given are the outer dimensions, not the inner ones. From the pic, it looks like the insertable length is around 20cm (8”).
It appears that the circumference is 15.5cm (about 6”), or (as Gprent said) 15.5cm/3.14 = 1.95” diameter. If that is the outer circumference, and the walls of the cylinder are 1/8”, it’s about 1.75” inside diameter.
Lusch (post #12) says he has one. If he could measure the insertable length and diameter of his pump, we’d have a definitive answer.
Live long and prosper.
Yeah, I’ve seen many of these online and I disregard them due to not enough insertable length. If the inside diameter is 2.5 though, that is mighty large! I have a beer can that is 2.5” and that is not one of the skinny ones either! It measures 8.25” circumference. Has anyone seen a dick that big? I have a 2.5” cylinder that is long enough but the base 3-4” packing the cylinder is expanding too much! I prefer a 2.25” cylinder.
I got the beer cans mixed up. Sorry, it’s actually 2 5/8” diameter. A 2.5” is only 7 7/8” circumference. Still quite large though.
My current dimensions: flaccid: 8" x 6.5" erect: 9.5" x 7.125" glans: soft length:1.825" soft diameter 1.65" firm length:2.286" firm diameter:1.90"
Goal: flaccid: 9" x 7" (.1" length .5" girth) erect: 10" x 8" ( .5" length 1" girth) glans: soft length: 2.25" soft diameter: 2" firm length: 2.5" firm diameter: 2.25"
Ultimate goal: flaccid: 10" x 8" erect: 11.5" x 9.75" glans: soft length: 2.5" soft diameter: 2.25" firm length: 4" firm diameter: 3" In other words: A big, fat elephant cock!
Dear Lusch, can you please shed some light on the measurements for this pump??
It doesn’t seem like a bad device at that price point.
Dear Lusch, can you please shed some light on the measurements for this pump??It doesn’t seem like a bad device at that price point.
Its huge. Im 5.6 girth and i dont even come close to packing it. Its around 2.75 inches in diameter and around 8inches max length. Honestly for the price its great but if you want a pump to pack this isent the one for you.
Thanks Lusch!
Yup, that’s pretty big.