Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Hesitating Between 2 And 2.25 Cylinder

12

A couple of things.

I only water pump with LA cylinder, I have tried an air pump and I don’t know how you people do it.

1. I like going between 1.75 and 2 inch cylinders. One technically should work a little more on length and the other on fullness but nothing that I would say is a game changer that would target it. However, I do feel a difference in my cock with both cylinders, both are good feelings but different. The only thing I can say is that the 1.75 feels like it is pulling and the 2-inch feels like it is pulling and expanding.
2. A MUST! I have to wear a cock ring on my balls when I pump, it helps keep the nut sack out of the cylinder. I saw another person here comment about the issues going with a bigger pump
3. My next buy will be 2.25 with 10’ inch length so I can get more water in the pump, right now at 9 inches I don’t get as much water as I would like before the water goes up the tube.
4. In general, you should have 2 or 3 cylinders.


Stop setting goals, set objectives without limitations.

5.5 NBPEL Start~~ 5.7 NBPEL- 2011 ~~ 5.75 NBPEL/ 4.25 EG 2012 (Stop 11 years- Started again 4/2023 same stats as 2012)

6.25 NBPEL / 6.75 BPEL / 4.75 EG (5 EG w/ C-Ring over ball & shaft) / Grower 4 FL - 4/2024 ~~ (Objective 6.75 NBPEL / 7.25 BPEL / 5.25 EG & Solid EQ)

Originally Posted by Bemorethanbig
A couple of things.

I only water pump with LA cylinder, I have tried an air pump and I don’t know how you people do it.

1. I like going between 1.75 and 2 inch cylinders. One technically should work a little more on length and the other on fullness but nothing that I would say is a game changer that would target it. However, I do feel a difference in my cock with both cylinders, both are good feelings but different. The only thing I can say is that the 1.75 feels like it is pulling and the 2-inch feels like it is pulling and expanding.
2. A MUST! I have to wear a cock ring on my balls when I pump, it helps keep the nut sack out of the cylinder. I saw another person here comment about the issues going with a bigger pump
3. My next buy will be 2.25 with 10’ inch length so I can get more water in the pump, right now at 9 inches I don’t get as much water as I would like before the water goes up the tube.
4. In general, you should have 2 or 3 cylinders.

Interesting , do you water pump in your bathroom or you move around your house while doing it ?

Every guy responds differently to the various PE techniques so you need to find what works for you. I have close to 600 hrs in an extender and got nothing from it. All my gains have been from pumping, and I have good EQ after a pump session.

I have had positive response from the hanging with fire technique, but have been unable to be consistent. What this really means as it is not important enough to me to make it a high priority.


Initial: 7” BPEL; 6” NBPEL; 5.25” - 5.5” MEG

Current: 7-7/8” BPEL; 7-3/8” NBPEL; 8.5” BPFSL; 6.5” MEG; 6”x5” Flaccid.

Goal: Improved/consistent EQ while managing ED. Secondary: maintain current stats.

Originally Posted by Baseball_chaser
The thing is in the upper quarter of my shaft (including my glan ) my penis start to curve and to taper ,my glan also have hard time remaining hard when I’m not 100% max EQ, so I thought pumping would be a good option to correct a curve, a taper and a glan that doesn’t get hard, penis extender on the other hand might correct a curve but not a taper, or clamping for example might give me better EQ in the glan area but don’t correct a curve ,anyway thx you for your help and tell me if there other methods than pumping to correct a tapered and curved penis with a glan struggle to get hard unless 100% EQ

The only other idea I have is to do a stretching exercises only on the part that starts to curve and only do the opposite direction of the curve. Ideally you want to create build up mass on one side of the penis that will push it straight. So if it curves up than squeeze and roll it the opposite way (rolling will slowly create micro tares only on one side). It’s close to Sadsak Slinky Sadsak Slinky Video

All of the penis growth and corrections happen do to micro tares (king of like muscle building).

Good luck and keep everyone posted on progress of what actually helped.


Current as of 01/15/2024 - BPEL: 7.00" MSEG: 6.5" | Wish 8x6 was possible, will settle for BPEG: 8" MSEG: 6.75".

Originally Posted by utereach
The only other idea I have is to do a stretching exercises only on the part that starts to curve and only do the opposite direction of the curve. Ideally you want to create build up mass on one side of the penis that will push it straight. So if it curves up than squeeze and roll it the opposite way (rolling will slowly create micro tares only on one side). It’s close to Sadsak Slinky Sadsak Slinky Video

All of the penis growth and corrections happen do to micro tares (king of like muscle building).

Good luck and keep everyone posted on progress of what actually helped.

Thank you I will take it into account, right now I have a rough idea on how to build a routine to correct a curve, any thoughts on clamping ? (especially for the head of the penis). I’ve heard great things about this exercise even tho a beginner should absolutely avoid it

Originally Posted by Baseball_chaser
Thank you I will take it into account, right now I have a rough idea on how to build a routine to correct a curve, any thoughts on clamping ? (especially for the head of the penis). I’ve heard great things about this exercise even tho a beginner should absolutely avoid it

I only heard of clamping at the base of the penis. But if you are on to something and it works that would be great!


Current as of 01/15/2024 - BPEL: 7.00" MSEG: 6.5" | Wish 8x6 was possible, will settle for BPEG: 8" MSEG: 6.75".

Originally Posted by Baseball_chaser
Interesting , do you water pump in your bathroom or you move around your house while doing it ?


1 x 20 min max in one go or 2 x 13 min session, no more than that and never above 10 Hg. I stay in the bathroom, the water I get is hot and I lay on the floor in the bathroom checking my phone. That’s why I don’t get why I would use a NIR+RED pad since with water pumping you don’t do long sessions and the water stays hot.

I only had a spill my first two times and after that you learn what to do, I know others actually stay in the shower, that is not necessary,


Stop setting goals, set objectives without limitations.

5.5 NBPEL Start~~ 5.7 NBPEL- 2011 ~~ 5.75 NBPEL/ 4.25 EG 2012 (Stop 11 years- Started again 4/2023 same stats as 2012)

6.25 NBPEL / 6.75 BPEL / 4.75 EG (5 EG w/ C-Ring over ball & shaft) / Grower 4 FL - 4/2024 ~~ (Objective 6.75 NBPEL / 7.25 BPEL / 5.25 EG & Solid EQ)

Originally Posted by Bemorethanbig
1 x 20 min max in one go or 2 x 13 min session, no more than that and never above 10 Hg. I stay in the bathroom, the water I get is hot and I lay on the floor in the bathroom checking my phone. That’s why I don’t get why I would use a NIR+RED pad since with water pumping you don’t do long sessions and the water stays hot.

I only had a spill my first two times and after that you learn what to do, I know others actually stay in the shower, that is not necessary,

But you can do regular non-PE task while water pumping right ? It sound interesting but I wouldn’t like to spill water everywhere ,if you have tutorial on how to water pump outside the shower/bath or explain to me how to fill with water an la pump cylinder it would be nice, anyway thanks for the information !

This is from another post I made:

I don’t know what happened but when I got on the RED / NIR PAD (WARM UP ONLY) + Water Pump after, that is when I saw a noticeable jump in my BPFSL.

I do water pumping not standing but sitting on the bathroom floor. I fill hot water and leave some space in the cylinder, I now know the right amount of space to fill up, I leave that to the side, then get as hard as possible, be on my knees, point downwards get the cylinder on, and then sit down, with just your hand pressure you should get no spill, the water goes down and the air is all on top and then pump out the air until the water gets to the tube (I have a 2ft tube?, longer than usual), after that you can sit or stand whatever. I don’t stand because if there is an air pocket it touches my dick and I don’t like it, I need to invest in a longer cylinder to get more water in so even at an angle I still only get water. I have a routine that I never get the floor wet and when I place it in and out I get no spill. I can’t explain it but you will find the gear and style you like. So like many here, you find a way to not get water everywhere, and even if there is a bit of spill it’s nothing an extra towel can’t handle. I’m so comfortable now that I could do this on my bed, I don’t have to stay on the bathroom tile.

In the future I will def get a bathmate when I am done with my PE growth and then to maintain pumping for life, but right now, i need to know the gauge and cylinder size difference, I am seeing what works for me and my gains best.


Stop setting goals, set objectives without limitations.

5.5 NBPEL Start~~ 5.7 NBPEL- 2011 ~~ 5.75 NBPEL/ 4.25 EG 2012 (Stop 11 years- Started again 4/2023 same stats as 2012)

6.25 NBPEL / 6.75 BPEL / 4.75 EG (5 EG w/ C-Ring over ball & shaft) / Grower 4 FL - 4/2024 ~~ (Objective 6.75 NBPEL / 7.25 BPEL / 5.25 EG & Solid EQ)


Last edited by Bemorethanbig : 01-17-2024 at .
Top
12

All times are GMT. The time now is 01:21 AM.