Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Cock Coil ADS

Originally Posted by StealthForMen
Xeno.. I would be happy to send you a…


Good for you; exercising of the fourth of the noble eightfold paths; right action. I offer you another opportunity to further cultivate that path: instead of sending it to me, send it to a Thunder’sPlace member.

Originally Posted by StealthForMen
One size fits all is impractical as the coil needs be size specific to function at its optimum…


I disagree: I think exactly the opposite in fact; the most important attribute of the Cock Coil is the ductility of the lead wire that it incorporates. This is because it allows for the device to deform concentrically, loosening or tightening, around whatever you wrap it around, penises included. I can’t imaging needing two sizes let alone a hundred.

Originally Posted by StealthForMen
…and Xeno mentions this as well.


It would be good to provide a citation (quotes) to demonstrate the veracity of your claim. That demonstration of rigor is perceived as a manifestation of integrity…a necessary attribute for one engaged in a fledgling commercial enterprise.

Originally Posted by StealthForMen
Mostly this thread is attempting to deal with the limitations of ready stock available at the retail level.


Naaaww, it’s easy find lead wire; any fishing department in a sporting goods store will have it.

And finally:

Privacy info: Clicking on this image will enable content from www.youtube.com. Privacy friendly version via Piped.

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

No problem Xeno its your thread..

But the fact of the matter is that a lead coil of the same length on a 4” x 3” penis simply won’t work anywhere near what could be considered effective on an 8” x 5” penis. The Stealth Corkscrew is a precision device and sized accordingly, the Cock Coil maybe not so much as when “deformed concentrically to tighten or loosen” it alters the length of said Cock Coil and Corkscrew equally. Btw. Very curiously in this context, I came to the same conclusion as you, that being that the optimum length of a properly fitted coil is near about 1/2” of the fully stretched flaccid shaft length.

Anyhow, you certainly can, as we both did, find 1lb coils of lead in the fishing department and 4’ lengths of heat shrink tube at the electric supply shop but what good is that when you require 2 lbs and 8’ ft or more of continuous length for the bigger penis. The quality/integrity of the Corkscrew speaks for itself as well do some of the other pics here showing multiple scrappy looking coils combined to make up the difference with the “one size fits all” Cock Coil.

I don’t mean to be rude but your Buddha quote regarding what is done and left undone by others is absolutely perfect.

Cheers man

Stealth I think you should discuss having a commercial account with thunder’s and create a thread to discuss all these matters.

By the way I would gladly receive the cock coil! (thank you Xeno)

I’m not sure combining cock coils is a big problem, it’s a good way to add more weight, stretch the shaft further and it doesn’t sound to difficult.

Originally Posted by StealthForMen
No problem Xeno its your thread..


Nothing is mine…and I have everything I need. Please present the offered gift to Walter.

Originally Posted by StealthForMen
Anyhow, you certainly can, as we both did, find 1lb coils of lead in the fishing department and 4’ lengths of heat shrink tube at the electric supply shop but what good is that when you require 2 lbs and 8’ ft or more of continuous length for the bigger penis.


Going to have to violate my own advice and not provide citations from elsewhere in this thread of vendors that supply bulk lead wire…McMasters perhaps was one? Maybe another will provide that. I also find that using two CCs, end to end works quite satisfactorily.

Originally Posted by StealthForMen
The quality/integrity of the Corkscrew speaks for itself as well do some of the other pics here showing multiple scrappy looking coils combined to make up the difference with the “one size fits all” Cock Coil.


:) , surely you refer to my own…some came out beautifully, some no…hard for me to care though, as it’s form still performs perfectly. I thought that BD’s CCs came out very nice (sorry going to fail to provide that citation as well…bit rushed this a.m.).

Originally Posted by StealthForMen
I don’t mean to be rude but your Buddha quote regarding what is done and left undone by others is absolutely perfect.


It is your Buddha nature that causes you to recognize it as such. May you recognize, and (rightly!) act upon the opportunity that this situation presents you to further cultivate that nature.

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

Happy to say that I cannot disagree with anything you post above.

True, nothing is really “ours” in a transient world of things that come.. And go. Being attached to such is the cause of all suffering. It is only a matter of knowing our true nature which is always available.

What we need we have and what we have cannot be taken away.

I am honouring your request and ask that Walter PM so we can go through the sizing process together.

Best wishes fellow traveler.

Stealthman

Best wishes to you too.

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

So this thing will replace traditional extenders? Will this actually give length gains on its own? Can uncut guys use it? When can we buy it because I can’t see it on the stealth site yet

Traditional spring loaded extenders have higher intensity settings, however bear in mind that a point of diminishing returns when the pain threshold is passed. The Corkscrew can be worn comfortably 4-8 hrs of active stretching. The Stealth products are designed to augment your regular PE routine not replace it. Different body types adapt/respond to the physical stresses exerted on the tissues in different ways so it is not possible to say “x” gains are possible in “y” amount of time.. So your mileage will vary. Cut/uncut does not not make much difference as you simply retract the foreskin back inside the sheath so that the silicone bead seats itself directly behind the glans. The Corkscrew is not yet been officially launched. The option to buy can be found on the purchase page itself.

Stealthman

Originally Posted by grow or die
So this thing will replace traditional extenders? Will this actually give length gains on its own? Can uncut guys use it? When can we buy it because I can’t see it on the stealth site yet

cock coil / corkscrew

StealthForMen

Some thoughts

>Anyhow, you certainly can, as we both did, find 1lb coils of lead in the fishing department and 4’ lengths of heat shrink tube at the electric supply shop but what good is that when you require 2 lbs and 8’ ft or more of continuous length for the bigger penis. The quality/integrity of the Corkscrew speaks for itself as well do some of the other pics here showing multiple scrappy looking coils combined to make up the difference with the “one size fits all” Cock Coil.

After reading Xeno’s inspirational posts on the cock coil, I decided to make my own. First hurdle - where I live no one sells lead wire for fishing. Obviously the fish here do not work with such weights. Anyway I finally tracked down some from a lead refining business where the main use seems to for those who make their own rifle bullet refills. So I bought a few Kgs so I could make much longer coils if I wanted to. I can now experiment to make the right size coils.

>The quality/integrity of the Corkscrew speaks for itself as well do some of the other pics here showing multiple scrappy looking coils combined to make up the difference with the “one size fits all” Cock Coil.

This is a bit unfair. Sure the Corkscrew looks good in the pics having been wound on a former and the “multiple scrappy looking coils’” were a result of a member’s experimentation into CC use. When I first made my Cock coil by winding it on a former it looked neat just like a Corkscrew but it also got a bit scrappy after a few uses of tightening and then untightening after use to remove from my penis.

Given Xeno’s generosity in sharing this invention and not patenting it means we can either construct one or for those wishing to buy a commercial version one from Stealthman. Not everyone is a home constructor and I am sure the Corkscrew will be a quality product for those who want to buy off the shelf.

StealthForMen, you have come up with some innovations which enhance the use of both such as using it with the Stealth innerwear and sized formers to keep the coils neat between uses. Hopefully you will also expand the use of these devices which will lead to further benefit to us all.

I understand Stealthman has a commercial account at Thunders discussing the Stealth innerwear. I assume he is somehow related to you. So I cannot see why you cannot discuss the commercial aspects of the corkscrew as a separate commercial thread. On the other hand given the nature of the product and similarity with the cock coil I cannot see why we cannot continue to discuss it here unless Xeno has an objection. I reckon we would all benefit from it.

Austfred

Originally Posted by austfred
…I cannot see why we cannot continue to discuss it here unless Xeno has an objection.


None whatsoever.

Originally Posted by austfred
I reckon we would all benefit from it.


I heartily agree…with everything you said in fact Fred. Thank you for your sane commentary.

I do hope that Walter will opine on his experience with the Corkscrew (should is be Cockscrew :) ?).

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

Austfred,

I tested about 20 different heat shrink tube compositions before getting what I found to be the right one. Perfecting the taper with the right end cap design/application technique took some experimentation as well.. So I have made plenty of “scrappy” looking pre-production coils myself. That is to be expected at the prototype stage.

Stealthman and StealthForMen are one and the same. I would prefer the former but it had been so long since I had logged in here that I could not remember the exact username/password combination.

I will see if I can get the Stealthman handle back online and post some Corkscrew pics one the Stealth Inner Wear thread (members forum for explicit pics).

Stealthman

Originally Posted by austfred

Some thoughts

Sure the Corkscrew looks good in the pics having been wound on a former and the “multiple scrappy looking coils’” were a result of a member’s experimentation into CC use.

I understand Stealthman has a commercial account at Thunders discussing the Stealth innerwear. I assume he is somehow related to you.

Austfred

Xeno,

Walter contacted me with his measurements and I sent him detailed instructions using the Stealth method so we are on the same page for the correct size.. Not heard back yet.

I was also of the mind to name it Cockscrew but Corkscrew was deemed more palatable.

Stealthman

Originally Posted by xenolith

I do hope that Walter will opine on his experience with the Corkscrew (should is be Cockscrew :) ?).

Xeno

Gravity ADS devices are limited in effectiveness, but certainly more comfortable thank Opposing pressure ADS devices.


Current 5.5 NBPEL x 5.75 Base EG - 5.25 MSEG 7" BPSFL

Short Term Goal 6 NBPEL x 6 MPEG

Long Term Goal 8 NBPEL x 7 MPEG (why not dream BIG?)

Originally Posted by StealthForMen
Xeno,

Walter contacted me with his measurements and I sent him detailed instructions using the Stealth method so we are on the same page for the correct size.. Not heard back yet.

I was also of the mind to name it Cockscrew but Corkscrew was deemed more palatable.

Stealthman


Cool.

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

Originally Posted by StealthForMen
Traditional spring loaded extenders have higher intensity settings, however bear in mind that a point of diminishing returns when the pain threshold is passed. The Corkscrew can be worn comfortably 4-8 hrs of active stretching. The Stealth products are designed to augment your regular PE routine not replace it. Different body types adapt/respond to the physical stresses exerted on the tissues in different ways so it is not possible to say “x” gains are possible in “y” amount of time.. So your mileage will vary. Cut/uncut does not not make much difference as you simply retract the foreskin back inside the sheath so that the silicone bead seats itself directly behind the glans. The Corkscrew is not yet been officially launched. The option to buy can be found on the purchase page itself.

Stealthman

I can’t wait to get one. Can it be worn while sleeping? It seems like the purpose is to hold the BPFSL? It also looks like it’s easier to put on than an extender. I’m just curious about the coil? I’ve been checking it out for a while, thanks to Thundersplace. The sleeves look like they can replace coban for extenders, instead of having to buy it all the time.

Top

All times are GMT. The time now is 03:45 PM.