Cock Coil ADS

Beware of lead poisoning! Plenty of articles you can Google on lead toxicity and prolonged skin contact.

Hi from the UK, does anyone know lead wire suppliers here in the UK?

I believe the lead hoax is a myth for the cancer money deal honestly. After much research I found so many articles that claimed big pharma started the lead shit so people get cancer. Why. Because lead blocks radiation¿ and.. We’ll get the lead paint out so we can penetrate your walls to get the radiation to everyone.

In honor of the upcoming 4th Anniversary of Thunder’s Place 4 years of Thunder!,

I give you the Cock Coil (CC).

But first, a warning: The CC is comprised largely of lead. Lead is toxic. If you choose to construct one or more CCs, use every caution to protect yourself from skin contact, ingestion or inhalation of lead. Here are some web sites to learn more about lead toxicity.

http://www.emed … RG/topic293.htm

You are responsible for your own health and therefore, the management of risk associated with construction and use of the CC. The designer of the CC accepts no responsibility associated with the design and will not be held liable for the safety of the design, the construction procedures or use of the product as intended or otherwise. Construction and/or use of the CC constitutes acceptance of these terms.

For liability reasons, I can not recommend safety precautions. I can tell you what I use to protect myself from exposure to lead during construction of the CC. I use latex surgical gloves, a respirator with particulates filters installed and side sealing goggles. I place newspaper on any surface that I will place lead on, I throw away all newspaper after construction is completed. I wear my safety gear until construction is complete and all related materials have been disposed of or cleaned.

Please note: My use of the tools and methods described above does not constitute a recommendation for said tools and methods. The efficacy of the tools and methods described above for purposes of reducing exposure to lead is not known. Again, you are responsible for your own health.

Due to the hazards associated with lead, it is imperative that one monitor the condition of the shrink wrap liner and the epoxy end seals of their CC(s) often. If either have become compromised, do not use the device until it has been re-"sealed".

OK, now that we’re done with that…

The recipe for the Cock Coil (CC):

Ingredients:

—->"pencil lead" fishing weight in 1/4" or 3/16” diameter. The 1/4" pencil lead will yield an approximately 0.9 lb (big) CC while the 3/16” pencil lead will yield an approximately 0.7 lb (small) CC.

Pencil lead is very hard to find, but may be found here (thank you Eroset):

http://www.cabe las.com/product … %3Bcat104685480

—->1/4" tubular heat shrink electrical wire tubing (4’ lengths are typical).

Heat shrink tubing is easy to find. I’ll let you guys find your own. Any decent electrical department/store will have it.

Preparation:

Straighten out the pencil lead (an old cast iron pan to roll it into a smooth rod works well).

Slide pencil lead through heat shrink tubing.

Cut off excess pencil lead with pliers (leave about 1/4" of heat shrink tubing overhanging the lead on each end).

Heat the tubing to shrink it around pencil lead.

Let cool.

Place a drop of epoxy cement at the tip of the shrunk tubing to "seal" the ends of the CC. Understand that "seal" is used in the relative sense and is meant to connote that the chances of lead migration from the interior of the CC to the exterior are reduced by addition of the expoxy, not eliminated.

Wind the heat shrink lined pencil lead into a coil around a 5"-6" diameter cylinder to form your CC (a rolling pin works well).

While still wearing your chosen safety gear, discard or clean as appropriate (for instance goggles and respirator) all materials that have come into contact with lead.

Wash your CC and your hands thoroughly.

You’re done.

Suggested Use:

Wrap with uncut (full length) HTW. Wrap so that wrap terminates at base, then pull excess HTW over glans, leaving excess HTW hanging off of end of penis. Slightly uncoil CC to place over HTW wrapped penis. Slightly recoil CC to LOOSELY snug CC over HTW wrapped penis. Roll up Excess HTW until it forms a ring that you place between the coronal ridge and the leading edge of the CC. You want to balance the retention force between the clamping function of the CC and the retaining function of the rolled up HTW behind your glans. You can add additional CCs, coiled one over another, raising the total weight with each additional CC. With each additional CCs you gain no additional clamping function, therefore all the additional weight must be borne by the HTW roll/coronal ridge.

Some neat things about the CC:

- guys with curves can bend the CC against their curve to straighten it.
- you can stretch the coil to place stress on both your ligs and tunica.
- you can hold A and V stretches for long periods of time.
- you can pee with it on, just loosen the coil a bit, go, tighten coil back a bit.

There are more, and undoubtedly one’s that I haven’t identified yet. I hope guys will experiment with these and post about their findings.

One request: Please don’t use PMs to pose questions regarding the CC, rather, post them in this thread. Thanks.

Enjoy fellas, and Happy 4th Anniversary to Thunder’s Place!!

Xeno
[/QUOTE]

Welcome to the board suzuki,

No, lead poisoning is very real and big pharma companies would have needed a time machine to go back and make it up because people have known about the dangers of ingesting metals for thousands of years.

It’s good to be a man of the 20th century sometimes.

Luckily, if you follow the instructions in this thread, and also don’t eat your cock coil ADS for lunch, you will not be ingesting any lead or even coming into any contact with it during normal usage.

I know this thread is old, and most likely dead. Just wondering how many ppl have built these and what the long term effects have been. Have the soft length gains been very real and noticeable .seems like a cheap and easy way to gain. Let kick this thread off again and hear from the long term studies as I sit back and order the supplies.

Thanks guys!

You can buy them from Stealth for Men. They call them the corkscrew.

I was never able to figure these out and they are in the collection of unused toys…

Dogman, I made one a couple of years ago, used it for a while, then stopped because it was hard to keep it from slipping. (The trick is to twist the coil tight when you put it on, but dick tends to shrink during usage). That said, it’s a good idea, & it’s fun to wear, but takes some fiddling to keep it on — I even tried using a long shoelace tied thru it & around my waist as a safety line! I’d say give it a try & see if it works for you.

Arte you able to bend the coil? Sounds like a dumb question just making sure before I build one.

The lead coil is infinitely bendable. You can change its shape over and over again and it is soft enough to bend easily but will hold the shape. You can narrow the coils for more of a swinging effect for walking or stretch the coils out to create an elongation splint effect, which I do when I’m sitting down and the weights aren’t working against gravity.

I made couple of these and have been using them as an ADS and low hanging weights when added to a stack of golf weights. Sometimes I use the hair tie “condom” method as described in the original post, and sometimes I use a PVC end cap with a silicone sleeve as stopper, depending on how stealth I’m trying to be and how much weight is involved.

They are really versatile and easy to mess around with until you figure out what works for you. Super cheap and easy to work with.

I tried using the shrink thing but had issues getting the whole length of tubing over the entire 1 round length of weight, so I ended up using some duct tape to wrap the weight instead, which was really easy and has a similar result.

The one thing about the CC is that it is not 100% stealth. Like a lot of ADS options, you have to have pretty baggy pants and the swinging weight will draw attention if the fabric is not very stiff, like with sweat pants.

Thought I’d add a note on this thread since I’ve found at last an easy/comfy way to use the CC. I’ve posted a pic on my log (waterman888 - Waterman888’s progress log) where I’m using a glans weight first, then I open the CC a lot to get it past this and constrict just a bit so it sits on top. That way I’ve now got the equivalent of 2 CC and it works very well without too much pressure on the glans, so starting to use it as an ADS to keep things extended between other PE sets. I’d always found the twin sock thing a faff, and getting the CC to stay in position was always a drama, so I’m glad to have found this method.

The glans weight I got from here in case anyone interested: Glans Stretching Ring | Weighted Glans Ring | Penis Weight. I got the one that is 40mm height x 26mm ID which is the heaviest one, fits me perfectly (always a bit of technique to get it on without skin pinch) and is about 500g. That being said, if I’ve been pumping there’s no way that will fit for quite a few hours, so I’m using it during the day before a pump set.

Good idea @waterman. I may try that with a magnetic version for easy removal. I made 2 CC’s, one at 0.75# and one at 1#. Sometimes I use a silicone band behind the glans to stop CC from sliding off. To take a leak I would have to remove the silicone band so water can flow freely.

I feel with the allen key version, which is what I have, there is no way it can slide off or accidentally come apart, which perhaps could be an issue with the magnetic one? As in, I have no risk now that anything will slide/slip/fall off when walking anywhere.

Yes, though it may depend on how strong the magnets are, and perhaps a rubber band around the glans ring could re-enforce it. Do you have to take yours off for peeing? I imagine I would have to use a size with ID smaller than flaccid to keep it from sliding off, so there will be a restriction to pass water.

Yeah it’s hard to know the size that will work. I had some Monty’s weights from years ago, so could kind of experiment with something to see slippage rates and then made a best guess. I can measure my flaccid girth near the glans if that helps get an idea of that vs internal diameter?

Right now it’s perfect as it doesn’t constrict really but can’t come off. I can pee through it, but find that when I do release the allen key that there is some backed up, so I don’t bother now - I get used to undoing it each time, not so hard.

I like the idea of wearing a 1-2 lb weight all day or half day but from what I read in the thread about hanging with FIR or US they say any weight hung when the penis is cold only strengthens it and makes harder to lengthen. That being said I read somewhere on here a guy wore 1 lb everyday for most of the day and in two months he grew his erection an additional 3/4 of an inch in only two months.

So I do t know what to believe anymore. Wearing a 1lb at least 4-6 hours seems very manageable but I don’t want to strengthen the tissue and not elongate.