Cock Coil ADS

Would you be able to use something for this besides lead?
I know you have the shrink wrap there but damn I’m not sure about
wrapping lead about my penis.

kook

Not that I’m aware of.

Congratulations Xeno

Genius shows in the Simplicity of the design, I intend to make one today. Thanks for the tip.

I skimmed this thread very quickly, so if it has been mentioned above, please excuse—- SOLDER Your photo is screaming at me SOLDER. It can be had anywhere, and without LEAD! I would also stay away from acid core, or any flux bearing solder. AC and Plumbing supply houses have greater selections than Home depot. I’ve been buying this stuff for years. It may not be as thick as the stuff you ordered, but it may be worth a try. The shrink tube idea is genius to protect the skin.

Thanks again

manage-

Thank you for the kind words. Are you intending to make a lead or solder based CC?

Solder

1.It is already in my garage
2.So is the shrink tube
3.I think that the makeup is antimony and tin, but I also have some that is silver bearing (will tarnish skin quickly), I havent bought lead bearing in years, and modern codes forbid its use in household plumbing due to possible leeching into drinkin water.
4.Even if the diameter of the solder is not as great, I can experiment with adding more windings.

Off the top of my head now that you lit the light bulb………

Sounds great! Solder most definitely has the right sort of ductility for the job. Of course it’ll be less dense than lead, but heck, the difference in toxicity is a worthwhile trade-off in my book. I’d be very curious about the densities of the solder that you’ll use, if you have that info, let me know if you would. In this post, my long lost buddy Eroset proposed placing more than one strand of lead wire in the heat shrink wrap. Sounds like you probably already know that heat shrink tubing can be had in fairly large diameters, so one could very conceivably make a custom winding to just the cross-section they wanted for optimal flexibility and weight using all manner of size of solder, kinda like some of those fancy loudspeaker cables :)

If you can end up with at least 0.5lbs per CC, I think that’d be pretty good, 0.75lb real good :) Might be hard to get to those weights with solder, but I don’t know.

Please post your thoughts on construction.

Great idea about doubling up within the shrink tube, I’ll give it a try. I’m logging off now until tommorrow probably, but I’ll let you know about the weight as soon as I’ve tried it……

Thanks again

In my quest for an ADS device that fits my particular needs*, I came upon this thread, and must say that I’m strongly considering making some of these coils. I also plan to try the golf weights, but that’s for a different thread. ;)

Anyway, I thought I’d revive the thread to share a good source for heat shrink tubing: Waytek | Electrical Components Distributor - I’ve ordered with them before and customer service was excellent. In making a set of Extra Heavy Duty battery cables for my car (0ga 4-strand marine cables.. *Tim Allen Grunt*) I used some of the heavy duty heat shrink that Waytek sells, and have to say that it’s the most versatile, professional heat shrink I’ve ever used. It shrinks to a remarkable range of sizes (read as: gets real small if you want it to!) and has a heat-activated adhesive lining that grips the hell out of whatever’s inside the tubing. The only disadvantage that I can think of is that I believe it needs significant heat to shrink down to size. I used a heat gun (available at any hardware store, generally used for peeling wallpaper) and it took a pretty steady blast to shrink the tubing.

I’m thinking of using some of this in conjunction with lead shot (buckshot, perhaps?) or the above linked rods, likely with multiple rods in each coil. I envision a smaller diameter coil to use toward the base of the shaft, and a larger "spiral donut" to wear right behind the glans.

* I sport a ridiculously short flaccid length, and am still working on losing enough weight so that my package will stop riding "out in front" - when I wear the TheraP wrist band as an ADS to keep (and hopefully cement) maximum flaccid length, it looks like I’m sporting a half hard-on.. Which is okay around the house in baggy sweats or whatnot, but not so much at work in dress slacks. =) So I’m looking for something that can hang right up close to the glans, and stretch the cock downward enough to not ride on top of my balls.

I have found some solder at the local hardware store but unsure of safety issues etc. No keen on the lead at all. Anyway the solder is about 3ft long 3/16. ( I think) Australian so I have to convert but the assistant says that it is a silver solder?

PM me if you can help out at all.

Sorry

Anyone has a picture of a CC being worn on the dick? Thanks

Good ideas need a bump occasionally.

I have constructed one and think it is the best thing since sliced bread. ;) Well it is the best ADS I have used hands down though. Also only cost about $15 for everything to make two.

Here is a post from my progress thread where I discuss it.

Thanks again for a great idea Xeno!

Roots

I can see how this works but why is it better than say PE weights? I assume the coil is not able to retain any outward force if you stretch it. I thouight the lead would have little tensile strength. Am I wrong about that?

Oh no, the lead is very thick and really clamps down well and doesn’t loosen up once it is twisted on.

I wouldn’t say it is better than PE weights, it is just easier. It goes on in seconds, stays in place extremely well, and is really low profile and stealthy.

To me an ADS is just an extra. I can’t think of any reason why they should promote/expedite gains, and the “heal in an extended state” theory is not backed up by anything that I understand about connective tissue growth, only by poor anecdotal examples and “common sense.” Nevertheless, I would like to wear an ADS just in case there is something to it as it is not going to hurt anything or require me to make choices about my available PE time as they are worn during non-PE time.

Considering my opinion about ADS’s, however, if one isn’t easy to take off and put on in seconds, completely comfortable to wear, and very stealthy, I am not going to waste my time fiddling with and wearing it each day as a “just in case” precaution. That is, I know myself and if the ADS requires any investmemt of my time or attention I am going to be VERY inconsistent in wearing it. The cock coil is the only ADS I have tried so far that fits all my criteria.

So it is a practical “better” for me, not an effectiveness “better.”

The one thing the cock coil can do that PE weights can’t is apply weight but also add extra tunica stretch at the same time. This is accomplished by cinching down all the coils so each one grips and then pulling it apart like stretching a spring. It will hold this position very well and add a little extra tunica stretch on top of the weight pulling down. Kind of like that dsyon extender thingy we have been commenting on I suppose.

But really the extra tunica stretch has nothing to do with why I wear it, and if someone else doesn’t mind the hassle, PE weights would be just as effective.