Who's a cocksmith ??

Ok, Iv’e posted this idea before. So let’s get on with it.

How many of you have fabricated your own PE devices?

Let’s post pictures, with decsriptions of what the device is used for. And the materials used in making the device.

Nothing more satisfying, than getting a bigger or stronger dick with your own creation.

Moderator, I hope I have placed this on the correct board.

These are the two homebrews I have built. They are made from ABS conduit, heated with a heat gun-trimmed, and finally filed to matching contours. The cylindrical extensions on the sides of the hangers is fabricated from T6061 billet aluminum turned down on the lathe and then threaded to accept a bolt. The bolt and washer asssembly hold the strap with the weight hook.The padding or gripping material is formed silicone. Both seem very comfortable, but I have to admit the starter model is much more comfortable at this stage of my PE. BPEL 7.125 , hanging 15 lb. in 3 sets of 20 min each.

This is the weightpost I made, for stacking my weights on. It is real easy to add or remove weight from this device. It was made from a piece of 2” T6061 billet aluminum turned down on the lathe to accept the weights I use.The shoulder at the base keeps the weights snugly in place. The top of the post was drilled and threaded to accept a 1/4’ eyebolt, this is where the hanger hook attaches. I purchased all of the weights in the picture from WalMart. I think I paid around $1.75 each. They are 2.5 lb. each.

Here are the homemade tubes I fabbed. They work well, I believe to compliment my hanging routine. After hanging, I use the tubes to keep every thing pumped up-to promote growth in the fatigued state. Anyway thats the theory.

Tubes were made from acrylic tube, purchased at a plastics wholesaler. Tops cut and formed by heat knife and file. The fitting for vacuum was purchased at Home Depot and installed using a drill and 1/4” pipe tap. The bases of both the cock tube and sack tube were then filed round and dipped in *Plasti-Dip*. Both tubes hold pressure fine and were relatively easy to make.

Great idea for a thread. Your pics are crisp and clear. The hangers are particularly impressive.

If I had a digital camera I’d post pictures of my homemade tube, modified Bib, AFB, and an early attempt at a wooden hanger that didn’t cut the mustard.

Thanks, for the compliment. Be adventurous, go down and have the picture’s scannned onto floppy. Then tell us the look on the photo tech’s face when viewing the devices. LOL

Maybe you’ll come up with someway to share with us all.

I thought this may be a helpful way to share info. with other PE’ers that might want to attempt to make their own devices.

“Necessity is the mother of invention”, somebody famous once said.

Can’t remember who though.

You’re a damned inventive individual. I really like the weight post. Any chance that you could make me one? I’d gladly pay a reasonable fee.

Yah,

I’m sure we could work something out. PM me.

Oh, Thanks for the comps.

Here is my knock off of the traction platform from acmepenis enlarger.com. The parts you need are; a bar clamp, U bolt, swivel pulley, and wingnuts. Cost about $10 and took about 15min to make. Great for hanging weights.

tryn4more: Those tubes are THE BEST!

-Tom-

I don’t know whether one of those Power Jelq things is worthwhile, but I think I have found a cheap alternative.

I went to my local gourmet cooking store and bought a jar lifter, which is used for home canning. (Here’s one: http://www.happ ycookers.com/wc … ge/1-12406.html ) Then I just reamed out the holes in the rollers a little so they roll more smoothly up and down my dick. It seems to work fine.

The only difference I can see between my four dollar version and the forty dollar Power Jelq is the foam padding on the rollers, but figure that’s easy to add once I find the right foam.

that Cool as hell !

How did you make those tubes?

Gardenier90-

>How did you make those tubes?<

“Tubes were made from acrylic tube, purchased at a plastics wholesaler. Tops cut and formed by heat knife and file. The fitting for vacuum was purchased at Home Depot and installed using a drill and 1/4” pipe tap. The bases of both the cock tube and sack tube were then filed round and dipped in *Plasti-Dip*. Both tubes hold pressure fine and were relatively easy to make.”

I have recently made a new cock tube (9”). Outgrew the 8”

Look in the yellow pages under plastic. The people at the plastics place are usually very helpful. If you want to stay “incognito” - if they ask, your’e making a display tube for pocket knives or something. Be creative.

I meant did you just bend down the end with the heat knife? Or did you attatch annother piece of plastic and melt it on. Thanks.

The reason I’m asking is because I really want to make my own, plus I have big privacy issues.