Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Marksman wrapping technique for uncut guys

Marksman wrapping technique for uncut guys

Marksman developed a technique for wrapping with Bib hangers which works for uncircumised guys some years ago - Wrapping drawings (p. 2).

I recently discovered this and think it may have use in extending and ADS with golf weights if you are uncut.

My reading of the approach is as follows

1. retract foreskin (ie glans exposed)
2.wrap a piece of T shirt material (not too thick) about 2” wide and long enough to wrap round your glans so half is on the head and half on the shaft
3 Secure it using a thin rubber band (not tightly in case you cut the circulation)
4 Fold the material forward over the head to cover the band.
5 Pull any skin trapped under it out. You now have a collar wrapped around your glans secured behind it.
6. Now carefully pull your skin back over the head and wrapping

When done the head looks bigger and has a built in cushion against the wrap used under an extender noose or strap

Now wrap behind the glans as before. Marksman used this with a bib hanger.

I am currently trialling it with a DIY velcro strap on my slider extender but think it might also be a great way as part of a wrap for golf weights used as an ADS.

Has anyone else tried it?

Witty ! Looks cool. One question.

When you pull the material to create the collard, do you pull the material that is towards/on the shaft on the glans or you pull the material that on the glans down towards/on the shaft?

The second way makes more sense to me. This way the glans is exposed out and you can wrap as bib says later

Originally Posted by quim92
Witty ! Looks cool. One question.
When you pull the material to create the collard, do you pull the material that is towards/on the shaft on the glans or you pull the material that on the glans down towards/on the shaft?
The second way makes more sense to me. This way the glans is exposed out and you can wrap as bib says later

>do you pull the material that is towards/on the shaft on the glans or you pull the material that on the glans down towards/on the shaft?

The Marksman approach is to pull the material that is towards/on the shaft on the glans. This way the foreskin goes back over the glans and you have a “bigger head.” Tried it yesterday and it does work. I found you also have to wrap well behind the head after doing this before you fit the strap. This reduces the stress on the foreskin just behind the corona.

I did also try the other approach somewhat like you suggest. In that case I simply put a narrow bandage wrap behind the corona with the foreskin retracted and then pulled the foreskin forward over the wrap and part of the glans. I then wrapped over the top as above. I found that approach put more stress on the foreskin. The first session went OK but the second caused some soreness in my foreskin.

“The Marksman approach is to pull the material that is towards/on the shaft on the glans. This way the foreskin goes back over the glans and you have a “bigger head.” Tried it yesterday and it does work. I found you also have to wrap well behind the head after doing this before you fit the strap. This reduces the stress on the foreskin just behind the corona.”

Why would you use this tecnique for extending? To prevent the strap slip away? Where do you place the band, right at the begining of the corono/end of the glans?

I did also try the other approach somewhat like you suggest. In that case I simply put a narrow bandage wrap behind the corona with the foreskin retracted and then pulled the foreskin forward over the wrap and part of the glans. I then wrapped over the top as above. I found that approach put more stress on the foreskin. The first session went OK but the second caused some soreness in my foreskin.
” I then wrapped over the top as above.”

what do you mean by that?

I think the way I suggest seems to be great for the vacextender as you get full gland exposed and away from the foreskin. But the silicone sleeve sounds even better. I will soon receive bib starter and I think ill get the vacextender too adn try everything out by myself

Hi Quim

“The Marksman approach is to pull the material that is towards/on the shaft on the glans. This way the foreskin goes back over the glans and you have a “bigger head.” Tried it yesterday and it does work. I found you also have to wrap well behind the head after doing this before you fit the strap. This reduces the stress on the foreskin just behind the corona.”

>Why would you use this tecnique for extending? To prevent the strap slip away?

Yes. The objective is to get the best grip with the least stress (ie not have to strap too tight.

>Where do you place the band, right at the begining of the corono/end of the glans?

In the groove just behind the corona

I did also try the other approach somewhat like you suggest. In that case I simply put a narrow bandage wrap behind the corona with the foreskin retracted and then pulled the foreskin forward over the wrap and part of the glans. I then wrapped over the top as above. I found that approach put more stress on the foreskin. The first session went OK but the second caused some soreness in my foreskin.
” I then wrapped over the top as above.”

>what do you mean by that?

I mean after pulling the foreskin over the first wrap and part of the glans, I then did a conventional wrap just behind the corona which is in effect over the top of the first wrap and foreskin.

>I think the way I suggest seems to be great for the vacextender as you get full gland exposed and away from the foreskin.

You do not need any wrap with the vacextender, just the silicone sleeves monkeybar supplies.

Regards
Austfred

“I mean after pulling the foreskin over the first wrap and part of the glans, I then did a conventional wrap just behind the corona which is in effect over the top of the first wrap and foreskin.”

So after you do the first wrap with the band and stuff you put your forskin on it, then you wrap on top of that forskin that is on top of the first wrap? then where do you place the strap? I am sure I dont get this… doesnt really matter, after discordering this stuff about the band, I will try out different ways :)

“You do not need any wrap with the vacextender, just the silicone sleeves monkeybar supplies.”
I think I can now use the band adn wrap and use it as a silicone sleeve to keep the skin retracted at the bottom of the shaft.

Thanks aussie :D

>So after you do the first wrap with the band and stuff you put your forskin on it, then you wrap on top of that forskin that is on top of the first wrap?

With your suggested second option with the wrap behind the glans the answer is yes. With Markman the second wrap goes behind the glans as in your option but not over the first wrap which is between the glans and foreskin. Does that make sense?

> then where do you place the strap?

On top of the second wrap behind the glans in both cases.

Yes. Cool ausfred. Thanks . I tried different way yesterday and I’ll see how itll work with devices :)

I have decided this technique is not really suitable for extender wrapping. While it gives a secure wrap I found that in the extender it seems to stretch the outer shaft skin rather than the tunica or ligaments. It might work for someone with a naturally long foreskin. It might also have application for someone part through regrowing a foreskin.

However I have found a variant works really well with golf weights ADS - golf weight ADS wrap for uncut guys

I started a new thread on this because it is more specialized and of interest to those using golf weights. This variant where the wrap is behind the glans does not seem to stretch my shaft skin and is very comfortable and secure


Last edited by austfred : 10-10-2014 at . Reason: correct grammar

Cool stuff austref, if I ever try golf weights I will give it a try for sure.

Soon I will get the old stealth phallosan from a friend and I guess that is better as an ADS than the goilf weights. How much weight is 3 ,4 and 5 rings? i guess the old phallosan can stretch like 1,5 kg max, that is like 3,7 lb.

Originally Posted by quim92
Cool stuff austref, if I ever try golf weights I will give it a try for sure.
Soon I will get the old stealth phallosan from a friend and I guess that is better as an ADS than the goilf weights. How much weight is 3 ,4 and 5 rings? i guess the old phallosan can stretch like 1,5 kg max, that is like 3,7 lb.

3.3 pounds. ;)

Sorry Quim, I had to.

5 rings = to 3.3 lb? That is just like a extender. Cool stuff if you work standing all day. I could a used that at the restaurant . lol

Originally Posted by quim92
How much weight is 3 ,4 and 5 rings?

I assume you mean golf weights. The standard ones I use are about 160 gms each so 5 of them would be about 1.8 lbs

Roots might be talking about Monty’s PE weights which are lead rather than iron.

I have been trialing this system with 3 weights but am about to move to 4 to see how it goes. It is far more comfortable and stealthy than an extender and can be worn for much longer periods.

While you are walking etc you also get a benefit from the extra dynamic load and I enjoy the feel as the dick bounces up and down as you walk. Roots, I hope I am not just toughening up the tunica?

Originally Posted by quim92
5 rings = to 3.3 lb? That is just like a extender. Cool stuff if you work standing all day. I could a used that at the restaurant . lol

Oh no, 5 rings is 3.11 pounds if we are talking about PE Weights. The standard golf swing weights (the red/orange donuts) weigh .35 pounds a piece, so 5 would be 1.75 pounds.

I was referring to the 1.5 kg you said the Phallosan can produce. That is 3.3 pounds, not 3.7 pounds. I was just being obnoxious. :)

Top
Similar Threads 
ThreadStarterForumRepliesLast Post
new V jelq technique (great for average and below average size guys)SoftPenis Enlargement Basics511-08-2012 03:25 PM

All times are GMT. The time now is 05:01 PM.