Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

penimaster Pro Cold glans

penimaster Pro Cold glans

I have experience with ads that has the straps and I quit using them because my glans got cold. However, over the course of time I see some companies such as phallosan and penimaster have come up with new designs without noosing your penis and appears to let blood flow to the glans unlike the noose ads.

With that said, can anyone please tell me if the bulb like design the penimaster pro has actually cause your glans to become cold while wearing the device for some time during the day?

Any info would be appreciated as I really don’t want to waste $300Us on this device only to have the same cold glans outcome.

thanks


9/23/08Erect Length 6.00, EG 4.500 Erect Width 1.75

Goal EL7.00 x EG5.00 x EW2.00

I think phallosan and penimaster just borrowed the idea from autoextender but they accomplish the same thing. Having used one, I can say that blood flow is still restricted and so cold glans are still quite possible. I used to recommend the safe option of removing the extender every 20 minutes to regain circulation for 5 minutes but then marinera suggested this mode of operation was the reason I got zero gains from extenders. If you have restricted blood flow, you really have to lessen the time between breaks in the extender.


Thunder's Place: increasing penis size one dick at a time.

Ok, thank you….since you have experience with ads im pretty sure you might have experienced this other issue I had; everytime I went to use the restroom, after wearing the ads for hours and bearing through the cold glans, I noticed my penis would have a stinging feeling only were the silicone noose adhered to it and it also seemed like it was stuck to to the silicone strap too. Have you ever experienced this before? Also is there some kind of thread or info you can point me to that might have some workaround to prevent this issue if you have knowledge of this issue? Thanks


9/23/08Erect Length 6.00, EG 4.500 Erect Width 1.75

Goal EL7.00 x EG5.00 x EW2.00

I have a Penimaster Pro and my glands doesn’t get cold. If I stretch straight up, after about 30 minutes my penis starts to get a little cold, but I think that’s due to the angle.

Check out my thread, I’ve provided some feedback on what I think about the device so far. Be mindful, I’ve only had the device for 3 weeks and last week I wasn’t able to use it much due to work.


Started: 6.75" BPEL, 8" (20 cm) BPFSL (1/2015) x 5" (12.5 cm) EG; Current (7/2017): 8" (20 cm) BPEL, 8.2" (20.5 cm) BPFSL x 5.8" (14.5 cm) EG; Gains (7/2017): 1.25" (3.125 cm) EL, 0.2" (0.5 cm) BPFSL x 0.8" (2 cm) EG

Short-term goal: 8.25 (20.625 cm) BPEL, 8.3" (20.75 cm) BPFSL x 6" (15 cm) EG; Long-term goal: 9" (22.5 cm) BPEL x 6" EG

Xtended's Progress Report

Same here. Bought a Penimaster Pro. The idea was to use the extender at home, the chamber part as a hanger with some weights and the belt as an ADS for my everyday activities such as work and college. At first, I was really having trouble to even begin using it, like creating enough vacuum in the chamber so my glans would stay inside without slipping out. I have managed to do it eventualy, but after aroud 20 to 25 minutes my glans gets really cold and start swelling and blistering. I’m thinking about throwing it away and getting an autoXtender from monkeybar, as in his website he claims you can use it as ADS 24/7.

I wear my PMP for at least 5 hours 5-7 days out of the week. I usually wear it for about 1-2 hours depending on where I am and if I have to use the bathroom
My glans may be slightly cold and have very mild fluid retention but other times it is body temperature. What type of clothes I am wearing plays a factor. I have never had blistering from using the PMP but I don’t use it to hang, just extend. I have no trouble getting a strong vacuum seal that holds. I do use the hose system and not the hand ball pump.

Along with the coldness you experience do you experience numbness? I’m not worried about a bit of coolness or cold to my glans as long as I have good sensation and my glans isn’t turning purple from greatly reduced blood flow.


ykm123321 is the owner of the gripping trainer website. He also surreptitiously posted here as LetsGrow123 in an effort to promote that site. Please take any product endorsements as very likely to be biased.

Nope, no numbness. It only gets cold, purple and big. It hurts quite a fair much when I take it out of the head attachment, and it hurts as well when its longer than 20 minutes inside, but after its out, it doesnt hurt at all.

Do you use it for 1-2 hours straight? Dont you take breaks? If you do, do you use any ADS/anti-turtle between breaks?

Originally Posted by GreenSteel
Nope, no numbness. It only gets cold, purple and big. It hurts quite a fair much when I take it out of the head attachment, and it hurts as well when its longer than 20 minutes inside, but after its out, it doesnt hurt at all.
Do you use it for 1-2 hours straight? Don’t you take breaks? If you do, do you use any ADS/anti-turtle between breaks?

I only take off the PMP for 5 minutes or less usually while I piss or something. I’ve worn it for over 10 hours with no break longer then 20 minutes. Are you experiencing pain on the coronal ridge right behind the top of the glans?


ykm123321 is the owner of the gripping trainer website. He also surreptitiously posted here as LetsGrow123 in an effort to promote that site. Please take any product endorsements as very likely to be biased.

Nope. The pain happens in what feels like something is pushing little tissue lines in the top of my glans and in the front. It isnt very painful, but even the smallest of pain is a bad sign, I believe, it should be at least 90% comfortable.

I am having issues with using Penimaster Pro extender.

I am about 10 hours in Penimaster Pro, but it is really uncomfortable after about 1 hour of usage.

There are several issues I’m facing:

1) The plastic base of extender that holds against pubic area hurts the skin at base of the shaft. Is there a way to put something around the plastic O ring to have it push softer against a skin and not irritate it?

2) I’m uncut with rather long forskin, so I have to pull it back before sucking the glans in the chamber. Still sometimes foreskin goes inside as well and when it comes out it is often puffy and sensitive, very uncomfortable. I have to wait for the puffiness to go down.

3) Pulling glans out of chamber always hurts. I apply the sticky lubricant that came with Penimaster package, but it still hurts even when I pull out really slowly.

I know that this extender is most likely to add to my length, which is what I need, but I can barely wear it for 4 hours (2x a day for 2 hrs) and it is always very uncomfortable to take it off.

Any tips to fix these issues?


05.10.2018: NBEL 15.5cm (6.1 inch), NBEG 14cm (5.5 inches), BPEL 18.5 (7.28 inch).

Extending via penimaster 2h-4h a day.

Goal: NBEL 8x6 inches

Originally Posted by Endover
1) The plastic base of extender that holds against pubic area hurts the skin at base of the shaft. Is there a way to put something around the plastic O ring to have it push softer against a skin and not irritate it?

I change the position up / down about every 20-30 minutes, so it’s ok I can tolerate it well

Originally Posted by Endover
3) Pulling glans out of chamber always hurts. I apply the sticky lubricant that came with Penimaster package, but it still hurts even when I pull out really slowly.

Don’t take the glans out right away after removing the extender. Instead remove the extender and walk around. Let the blood get in and accomodate to less tension. Open the ventil shortly, not completely, let a bit of air in, then wait 1-2 minutes, then again, soon your glans will come out easily with no pain.

Doesn’t matter what brand or what attachment style.

Anything that holds your meat firmly enough to be effective is gonna restrict blood flow. It’s the nature of the beast.

Originally Posted by Endover
3) Pulling glans out of chamber always hurts. I apply the sticky lubricant that came with Penimaster package, but it still hurts even when I pull out really slowly.

Any tips to fix these issues?

I started using pure castor oil instead of the Pro Master lubricant that comes with the PMP and am very happy with the results. I am still getting a great seal and it doesn’t hurt at all coming out like it would using the default lube.


Currently (10/2019): 7.75bpX5.75eg

9/26/21: 8.125x5.75

Goal: 9.5bpX6.5mseg

Top
Similar Threads 
ThreadStarterForumRepliesLast Post
Penimaster Pro or Phallosan?NeverEnough9Penis Extenders6308-18-2015 07:03 PM
Comenzando Penimaster ProSagitarioExtensores para Agrandar el Pene1702-03-2015 12:35 AM
Cold, numb glansYouknowDPenis Enlargement Basics408-06-2004 04:45 PM

All times are GMT. The time now is 02:25 AM.