enlargerstrap

Has anyone tried this setup?

https://www.enlargerstrap.com

It appears to be light weight and might be a good supplement for hanging. And at 20 bucks not over priced either.

I pulled the link from the peforum under gogether post.

If you’ve got any Theraband around, it’s a snap to cut a piece to the shape they show with a steel edge and a knife. You can use a rubber band to hold the wrap in place - it’s got to be pretty darn tight - and then tie a shoelace to the end and around your leg a couple times and back onto itself with a tautline hitch.

Or, use it a la PenisPlus () around your waist. A piece of latex tubing over the string where it “anchors” around the base of your penis akes a reasonable cushion.

The main thing I see - I haven’t tested the one I made in about ten minutes for very long - is do you really want your dick wrapped up in latex for that long?

We’ll see what it feels like….

I posted a similar question in the Reviews Forum a while back and have been experimenting with the concept since using several home-made versions. Basically the problem is that it tends to grip the skin rather than anchor on the internal structures. For whatever reasons, after using similar devices for extended periods over a month I’ve discovered that my flaccids have increased quite dramaticaly and, strangely, my scrotum has become larger - my balls don’t ascend as high as they used to when I get an erection …. don’t ask me why!!!

My most successful variant to date has been using a modified home-made BibHanger, a Theraband traction strip and the whole lot anchored to a belt above the knee. There are problems with fluid build-up if left on for extended periods….. but it appears to be successful if used in conjuction with hanging.:)

lil1 :lep:

Just completed my second week of several hours a day at work with the modified Bib (held together with cheap rubbber cock rings rings) and tensioned with elastic down to a belt below my knee.

Started to have it on at home on the weekend too. Partner doesn’t know/ hasn’t noticed.

I get quite a pull going. even while seated, though standing or walking is better, but no fluid build up. It does get a bit uncomfortable - and I dry jelq / uli lightly after an hour or so and change legs.

How does the belt stay in place above your knee, lil1??

Flaccid length seems wonderful—-a guy did a double take at a public piss trough just yesterday— haven’t measured it though.

I’ve got fairly thick muscley legs and the belt is fairly tight so it can’t ride up. Tried it below the knee too but, for me, it restricts movement more.

How are you combatting fluid build up - that’s been the biggest issue for me so far. Do you wrap?

I’m getting great flaccids after removing it … measured over 5” the other day which looks proportionally pretty big on a guy my size :) - anything over 6” flaccid and I’ll look like I’m half horse ……… I don’t have a problem with that!;)

lil1 :-pink:

l2b —

I missed the review for this item,

I’m going to order the premade unit and provide some feed back after giving it a try for a while.

thanks for the comments

cool led zep, seem like a good company , they dont over charge for thier stuff. IVE SEE SIMILAR STUFF for 100 bucks! i also like that penis plus contraption, but i dont have the 100 bucks to spend and i tried a homemade version and just didnt work out id rather have the commercial one!im curious to see how you like it!

cyber~~

Sorry, Big 1, (—been dieing to call you that for ages—) I only just came back to this thread, and noticed that you had asked me a question.

SOME ONE IS INTERESTED IN THIS AT LAST!!!!

Fluid build up has never been an issue. I’ve worried that I’ve left it on too long in the past, and it has gotten a bit sore —shaft “burning”sensation but it always “bounces back”—alive again.

I wrap with sweatshirt cotton type material, including some over the glans to cushion it against the rubber rings when rolling them up— or down— onto the Bib hanger to hold it together. Wrap is just a few times around. Not thick. You don’t want it as thick as for hanging.

This week I have released the stretch a little— and been able to keep the “all day” stuff going for maybe 5 hours in the day— with a hour off over lunch. Re: The fluid build up —— Perhaps you are wrapping/ stretching too tight/ too far??? ()

It’s the time rather than the force that is important—- I hope!!!!

Off the thread— but I think you need to picture this multi-tasking that I am currently doing— at 6.30 am Sat 6 April— ….I’m writing this while hanging— I use a spring balance and luggage strap pulling against a short section of horizontal pipe balustrading in my Darlo attic. Left hand typing, with the keyboard in the right palm, turned half away from the computer with my dick being stretched to 9.5 inches— just measured straight out to the front (and—- just moved it to the next lower pipe—- for 9+5/8” stretch ——-Wheeeeeeeee!!!! ) That is equal to past records— but not a new record. (Was hanging BTC earlier—- Much easier to use the computer)

I only just read your stuff on Traction Wrapping as well today. The effect should be quite similar— plus the advantage of not taking it off to pee. Your setup must look amazing in a pair of tight Levis— if one were brazen enough to do it— …..(I wear floppy Chinos at work while stretching).

My flaccid size is now more in the high 5 inch rather than the 5.0- 5.5 range. Don’t know if this is “permanent” yet.

Erect size is still around 8.75” BP— but it was just 9 inches after PE the other night!!!!!. I don’t think these are permanent gains.

RE— Height to dick size ratio— I am not tall either —-5 ft 7 1/2 inches tall, so do have something of a reputatoin at the Darlo /East Sydney gym change rooms, and it makes an impression in the gym shorts and Levis.

How tall are you?? ——— I wouldn’t be stopping PE cos it looked too big if I were you!!!

You talk about rubber rings …. where do they fit into the picture?

You might be right about me having too much tension. Yesterday I wore my stretcher into town to do some shopping (looks awesome BTW, my dick goes half way down my leg - it’s verging on obscene! :chuckle: ) Anyway I was strolling along, on my way to get a haircut (thinking “I’m going to have such a reputation when the barber sees that thing down there!”) Next thing I know, TWANG!, the damn thing slipped off in the middle of the mall! :o TINKLE as the hose clamp dropped onto the ground, and OMG as I felt the belt slipping over my knee on it’s way to my ankle!!!! Talk about being sprung! :o :o :o I muttered something like “Damn hole in my pocket!”, picked up the hose clamp and limped off to the nearest public convenience, praying all the time that I wouldn’t leave a trail of Theraband behind!! ……… I think I learned my lesson about too much tension!

Since then I’ve been using a thick rubber band instead of the hose clamp to keep the Bib in place. It’s more fiddly but much more comfortable and potentially less embarassing! :chuckle: I’ve also been wrapping the entire top portion of the shaft which has alleviated the fluid build-up problem but it does make the penis more cylindrical and therefore easier for the stretching tackle to disengage ….. I’ll have to work some more on that one.

Man you’ve got a monster! You’ll be P10 before you know it - I’m not surprised you’ve got a reputation at the gym! I’m only a little 1 - 5’3” tall - so you can imagine what a 5-6” flaccid would look like on a man my size - very generous!:chuckle: A 9” nbp would hit the top of my kneecaps if I pushed it down! Perhaps a bit excessive!! Still a long way to go but I’m getting there….

lil1 :sun:

Great story.

“What straights in the country get up to……” I can see I need to get out of central Sydney more often….. Wondering which Mall— kind of narrows it down to the N place or the W place. I know you want to remain anonymous. I’m just being crazy.

Complete descripton of my all day hanger is at my progress report at the PE Forum—as that’s where most of my posts are— and my history mostly is. (ALSO HERE at the thread ” Question regarding bib hanger and all nite or all day stretching!” which you were also involved with)

I use two rubber cock rings instead of the hose clamp. Hose clamp surely will wear holes in your pants— or legs?? You probably only need one ring , but hey— one might roll off. The cock rings are really industrial type “O” rings —- so you could buy them from “that machinery man” in W St N —- if he still exists. He was there in the 60’s . (I have this photographic memory for radio ads from my childhood.)

The one “mod” that I haven’t done which I can think of to improve things would be to cut a couple of parallel indentations in both nylon parts of the Bib to give the rings somewhere to “key” into.

I have also modified the cut of the wrap so that it has an extra wide bit to go over my glans just once in the wrapping. So there’s a gentle semi circular addition which I place opposite to the downwards cut out of the smaller — upper side of the Bib hanger. I’m sounding like “you -know-who” with this description. Sorry Bib—

It IS difficult to describe.

Do you want to email me?? —- We could also do better by phone.

Regards

P9

I ditched the hose clamp too - it was damned uncomfortable and unless you got the angle just right you could see it under your trousers. Rubber band is working satisfactorily but it’s a real pain (sometimes literally) to get on and off. I’ll search the auto store for the “O” rings. I’ve solved some of the fluid build-up problems by wrapping right up to , but not over, the glans with a cotton material. If the traction is not too high there is very little, if any, fluid build-up and after checking obsessively for the first few days I can now wear it for up to 7 hours. It can get pretty challenging toward the end and taking a piss is a real pain :( . Great flaccids after removing it and these days I hang between 4” - 5” most of the time unless it’s really cold! It’s a great change from the old button dick days.

let us know how you get on.

lil1 :lep: