Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

LG Hanger, A Gentleman's Way To Grow His Dick!

12

LG Hanger, A Gentleman's Way To Grow His Dick!

I did a review on the major compression hangers and felt it was worth to give my input on what I consider the best vacuum hanger.

It’s no secret I made most of my gains doing what I was once terrified of, strapping weights to your dick and letting go. I’ve been in the game a long time. After making half inch gain in manual stretches I stalled for 2 years. Then I participated in Babbis’ experiment. I gained twice as much in half the time using a vacuum hanger.

This device you couldn’t add vacuum to it and taping wasn’t common knowledge in 2006. Out of paranoia and slippage I never went above 8 lbs till I got the Max-Vac (RIP) which allowed extra vacuum to be added. I eventually tried other methods but vacuum hanging was always a part of my repertoire at some point.

Once conditioned for the vacuum and learning the correct way to tape its pretty unbeatable. I find even to this day time under tension is better than intense weight for shorter duration. The LG is built like a tank, it can take you up to high weight, again once conditioned for it, I got up to 20 lbs consistently for 30 min sets and i know kingsnake got even higher. I made most of my gains in the 8 to 15 lbs though. Hanging one or 2 long sets instead of 3 to 6 shorter sets was more time efficient for my busy lifestyle. The fact that I didn’t have to worry about circulation issues was a big plus.

So vacuum hanging is a huge benefit for me and is what brought about most of my gains. Because of that fact I have tried just about every vacuum hanger on the market. The LG is the best vacuum hanger on the market. It is custom built using your own measurements. It’s going to fit you. It’s made from a solid piece of acrylic that is lathed out. I’ve dropped that max vac and the LG hanger on concrete floors and only the Max-Vac broke. I can add extra vacuum and keep an accurate measurement of the vacuum level that’s used.

The sleeves are also the best on the market. I’ve tried most of the big competitors and they still come out on top. They are very durable, stretchy and keep their shape without permanently relaxing.

The only con that I see if somebody wants to go this route is the price. To me it’s totally worth it to save up a little more and buy a quality product that’s meant to last.


My MaxVac Setup Longerstretch's Golf Weight and HTW setup My Log

Starting Size: circa 2003: 5 BPEL x 5.0 MSEG August 2007: 6 2/3 BPEL x 5.5 MSEG 04/22/08: 7.5 BPEL x 5.6 MSEG... On and Off again for a while... 11/25/13: 7.75 BPEL x 5.75 MSEG 08/01/19 BPEL 8.03 x 5.6 10/01/19 BPEL 8.19 x 5.6


Last edited by longerstretch : 08-08-2019 at .

I’ve been studying this brand for a long time. I’m thinking of buying it in the future. I just find the international shipping cost expensive.

Originally Posted by grozajpg
I’ve been studying this brand for a long time. I’m thinking of buying it in the future. I just find the international shipping cost expensive.

Your so correct on the international shipping rates are so crazy.I ordered a set of LG’s girth bands back in the spring and the shipping cost for something that weighs nothing was almost the same cost as the girth bands.And I live next door in Canada.

Damn that’s crazy but not the first time I heard that. Try emailing them I believe I read that there was a glitch on their web site


My MaxVac Setup Longerstretch's Golf Weight and HTW setup My Log

Starting Size: circa 2003: 5 BPEL x 5.0 MSEG August 2007: 6 2/3 BPEL x 5.5 MSEG 04/22/08: 7.5 BPEL x 5.6 MSEG... On and Off again for a while... 11/25/13: 7.75 BPEL x 5.75 MSEG 08/01/19 BPEL 8.03 x 5.6 10/01/19 BPEL 8.19 x 5.6

Why go with the lg hanger?

I have found cheap alternatives on Ebay and Aliexpress that do the job just as well, waiting on my next batch as managed to destroy the last two.

But yeah by all means go with LG hanger, maybe a matter of build quality also and worth the money if it lasts.

Vac hanging is the way to go, can’t seem to get on with the male hanger, wouldn’t mind selling it if anyone interested??

Regards

C`


21/09/2019. 6.2 inches bone pressed erect length.

Short-term goal 24/12/2019

7inches bone pressed erect length

Question

Can you give a link to the gander you use?

Originally Posted by cheeba
Why go with the lg hanger?

I have found cheap alternatives on Ebay and Aliexpress that do the job just as well, waiting on my next batch as managed to destroy the last two.

But yeah by all means go with LG hanger, maybe a matter of build quality also and worth the money if it lasts.

Vac hanging is the way to go, can’t seem to get on with the male hanger, wouldn’t mind selling it if anyone interested??

Regards

C`


Build quality is the best hands down and that’s coming from years of experience. I started with monkeybars Vac-hanger version 1. I couldn’t add extra vacuum like many of the cheap bells you see on Ebay or aliexpress. I was limited to 8 pounds and below because of it. Any higher and slippage would occur which can cause blisters if left unchecked. Same thing went for The Grip. I then went with Max-Vac which you could add vacuum and got up to 12 to 14 lbs with it with but was cheap plastic and did break here and there, especially at vacuum port. Also the sheaths used by them was thin and quality control was not the best.

You really have to be trying to break the LG to break the LG and it’s custom fit. Also the sleeves are the best on the market. Customer service is phenomenal. The owner is innovative and has a few projects now, one of them being an extender that uses the LG dome.

The Male hanger is a rip off. The first version gripped but I always got twisting in it I think because of the bottom platform instead of teeth and it was always to one side. I never could get the 2nd version to actually grip and would just slide to behind the glans. I reviewed and compared those to the bib before. Shady practices of the male hanger owner aside the hanger themselves suck.


My MaxVac Setup Longerstretch's Golf Weight and HTW setup My Log

Starting Size: circa 2003: 5 BPEL x 5.0 MSEG August 2007: 6 2/3 BPEL x 5.5 MSEG 04/22/08: 7.5 BPEL x 5.6 MSEG... On and Off again for a while... 11/25/13: 7.75 BPEL x 5.75 MSEG 08/01/19 BPEL 8.03 x 5.6 10/01/19 BPEL 8.19 x 5.6

Interesting post!

How much time did you hang per day and how much was each session?

I’m looking to go back with my Bib hanger but I’m not sur I want to put 3hrs/day on that 😑

How much is the LG?

Thanks


Start 04-26-2013: BPEL: 7", MSEG: 5 5/8. gain till 01-10-2014 BPEL: 8", MSEG 5 7/8. 4 years Brake.

Start #2 01-17-2018 BPEL: 7 5/8, MSEG: 5 7/8

NOW: BPEL: 8 1/4", MSEG: 6" . Goal: 9x6.5"

They are expensive. Worth the cost in my opinion. The cheapest package is $265, that’s without the hand pump and weights. Weights can be purchased locally and hand pumps can be found elsewhere as well.


My MaxVac Setup Longerstretch's Golf Weight and HTW setup My Log

Starting Size: circa 2003: 5 BPEL x 5.0 MSEG August 2007: 6 2/3 BPEL x 5.5 MSEG 04/22/08: 7.5 BPEL x 5.6 MSEG... On and Off again for a while... 11/25/13: 7.75 BPEL x 5.75 MSEG 08/01/19 BPEL 8.03 x 5.6 10/01/19 BPEL 8.19 x 5.6

Must be getting some kind of perk for this plug lol QUALITY for sure overpriced definitely (luckily you only have to pay $600 for free shipping). Male hanger worked well for me. It is basically identical to the BIB hardcore.


Start : 7 BPEL, 4.8 mseg

Now : 8 BPEL, 5.43 mseg, 8.375 BPFSL

I’ve made other reviews before and I’ve been using this device for years. Check out my other reviews and history here and at MOS if you want. I know it’s expensive but also know it’s worth it. Buy weights and hand pump elsewhere if needed. If it’s not for you it’s not for you, won’t effect me one bit. No skin off my ass so to speak. I think the male hanger is vastly inferior to the bib but everyone is entitled to their opinion and I’m not the only one that shares that opinion.


My MaxVac Setup Longerstretch's Golf Weight and HTW setup My Log

Starting Size: circa 2003: 5 BPEL x 5.0 MSEG August 2007: 6 2/3 BPEL x 5.5 MSEG 04/22/08: 7.5 BPEL x 5.6 MSEG... On and Off again for a while... 11/25/13: 7.75 BPEL x 5.75 MSEG 08/01/19 BPEL 8.03 x 5.6 10/01/19 BPEL 8.19 x 5.6

I wish I brought this ages ago.

I recently got stung with a uvipe hanger that costs about the same but was absolute crap and didn’t work from the get go. Lost the tracking ticket for that item when I sent it back and paypal required that to get a refund or they wouldn’t give me one, so lost $250 on that.

The vax extender 4. I now put that in the rip off category.

I’ve bought a few replacement attachments after they’ve split. Each time I’ve been able to hang for about a week before the things split while putting it on, requiring re-ordering and paying ridiculous shipping fees he is obviously profiting from.

He could use a better material that wouldn’t rip so easy but then he’d kill his business.

The bib can only be worn for 20 minutes and then requires 10 minutes off, adding to 30-40 dead time wasted.

I have a question about the LG. Can it be work with a vax extender to for vacuum extending?

Originally Posted by longerstretch
I’ve made other reviews before and I’ve been using this device for years. Check out my other reviews and history here and at MOS if you want. I know it’s expensive but also know it’s worth it. Buy weights and hand pump elsewhere if needed. If it’s not for you it’s not for you, won’t effect me one bit. No skin off my ass so to speak. I think the male hanger is vastly inferior to the bib but everyone is entitled to their opinion and I’m not the only one that shares that opinion.


I mean, I like the LG I just find it overpriced a bit, but then again so is all pe equipment. Luckily LG is high quality. Nothing seems too bad after shelling out almost $400 on the PF.

Compared to the original BIB i definitely agree, Male Hanger doesn’t come close.


Start : 7 BPEL, 4.8 mseg

Now : 8 BPEL, 5.43 mseg, 8.375 BPFSL

Originally Posted by thepi0neer
I mean, I like the LG I just find it overpriced a bit, but then again so is all pe equipment. Luckily LG is high quality. Nothing seems too bad after shelling out almost $400 on the PF.

Compared to the original BIB i definitely agree, Male Hanger doesn’t come close.


Man I agree to all that. I’ve sunken a few grand over the years. I had the PMP but it sucked on my glans weird. I recently spent $190 on an X4 and then another $50 or so on a vac extender mod and I could’ve honestly gotten something on Ebay for $40 as I’m only going to wear it at home. I am participating in the clinical trial though so should at least get my money back on the X4.

I’ve had the owner of the Male hanger maker fake accounts and troll my posts in the past.


My MaxVac Setup Longerstretch's Golf Weight and HTW setup My Log

Starting Size: circa 2003: 5 BPEL x 5.0 MSEG August 2007: 6 2/3 BPEL x 5.5 MSEG 04/22/08: 7.5 BPEL x 5.6 MSEG... On and Off again for a while... 11/25/13: 7.75 BPEL x 5.75 MSEG 08/01/19 BPEL 8.03 x 5.6 10/01/19 BPEL 8.19 x 5.6

Originally Posted by longerstretch
They are expensive. Worth the cost in my opinion. The cheapest package is $265, that’s without the hand pump and weights. Weights can be purchased locally and hand pumps can be found elsewhere as well.

I already have weights and a pump for my pumping session! But it’s still 265Usd for me it’s more 400$Cad 🤦‍♂️

How much time can you hang each set?


Start 04-26-2013: BPEL: 7", MSEG: 5 5/8. gain till 01-10-2014 BPEL: 8", MSEG 5 7/8. 4 years Brake.

Start #2 01-17-2018 BPEL: 7 5/8, MSEG: 5 7/8

NOW: BPEL: 8 1/4", MSEG: 6" . Goal: 9x6.5"

Top
12
Similar Threads 
ThreadStarterForumRepliesLast Post
LG Hanger, a new vacuum hangerraptor6Penis Hangers33009-10-2022 03:03 PM
Hanger battle! LG vs Vachanger3!FrozenMalletPenis Hangers609-21-2015 09:59 PM
Hanging RoutineDickstructionPenis Hangers902-07-2006 03:18 AM

All times are GMT. The time now is 07:33 PM.