OK now this is really pissing me off!

Please be aware that i am not angry at bib or anyone here but i am just plain frustrated.

Well, I can’t get the stupid fucking wrap on my dick (I have two hands only people!) How am i supposed to hold back the skin with one hand and stretch the dick out with the other and then have a hand left to wrap the fuckin theraband round my dick!!!

I attatch the hanger in all sorts of positions but it just cuts of circularion and only gets skin stretch.

In all the time i’ve had the hanger i’m almost ready to throw the damn thing out the window but id thought id do a last grasp effort here.

Is the hanger only for some people?
I only have a girth of 1/2 inch or less when i’m flaccid and I have heaps of skin on my dick.

What the fuck is going on here?

Also am I wrapping properly?
I have long strips of thereband and it takes decades to wrap the thing around.
Even when I do it never is tight at all because when i have to loop it around my 50 hands it’s all loose (ok I don’t have 50 hands but you get what I mean).
The only way to tighten it up is to yank the theraband tighter and this gets my dick on it’s side in the thereband.

I almost threw the hanger at a my bedroom wall today and I swore at it in disgust and really went skitzo at it.

I don’t know what the fuck to do.

If I can’t get the hanger to work i will be retiring from PE because i was seeing no gains from stretching and I don’t have the energy in me to keep doing that stuff for no results.

Regards,
Cas

Hey cascade,

I know the frustration. I got really pissed off several times when I began hanging.

For me, wrapping became manageable when I realized that I didn’t need to pull skin toward the base for every loop — only the first.

Here’s the idea:

You try your best using your 60 hands to wrap the first loop around fairly “tight” skin; it’s okay if it’s not perfect. Oh, and you can use a little piece of translucent tape to hold the beginning of the theraband in place.

Once this first loop is completed, you hold tight around this one loop with your left hand and pull your penis outwards with this grip, thereby tightening the skin from that first loop all the way to the base. The right hand then adds another loop, a little further toward the base than the first.

Then you move your left hand’s grip down to the new loop, again pulling your dick out while the right hand adds another loop, and so forth, until you loop down to wherever you want to end.

Were you following this procedure already? Let me know if any of it is unclear.

Cas,
I was laughing while reading your post. Not at you, but at the fact that I was THERE exactly just a month ago. My BIB got thrown around the boat a bit, and it came very close to going overboard. I know exactly how you feel. The learning curve is very steep for some of us. Work closely with BIB to get it right. For me, the success came with this post about head wrapping: Twisting in Bib . For you, it might be some other obscure post. Look them all over, try out all the different stuff, but mostly start getting help and advice from the master BIB himself.

Also, I am not 100% even yet. I have trouble getting the wrap exactly right some days. In fact, I got plenty pissed off at the whole thing just the last day I hung (the day I hurt my hand). First set went fine, but then I couldn’t get the wrap right again after that. Really pissed me off, I let loose a string of obscenities that made my freshly laid cabin paint peel, and the Theraband did indeed go overboard (although later recovered). So I hung out my sets with my Wench (thanks again Cap). But when I can use my right hand just enough to wrap again, I will be right back on it. Just remember the goal - longer penis. It is worth the learning curve, no matter how frustrating, because a longer penis is down the road for sure. Others have gotten their BIB to work, we can too. It is just a pain in the ass to get the initial adjustments right. Remember, you want a longer dick and the BIB will get you there. By the way, nice talking with you again Cas.

With any luck, BIB himself will chime in here and save the day…

Cascade,

Been there. I did not read any of the subsequent posts so maybe what I offer has already been mentioned. I overcame this problem by making a noose out of a large O-ring and then stuffing it through a washer. I then use a short string to tie one end to the O-ring and the other to the faucet handle in my bathroom. I slip the O-ring over myself and slide the washer carefully up to my skin without pinching myself. I then move away to create tension i.e third hand.

Also, wrapping is an art as well as tightening/positioning the bib hanger. It came slowly to me through experimenting. I was only stretching skin at first. Then I learned how to create fatigue. I am still learning how to be more efficient. I have been a slow gainer but I am absolutely convinced that it works. I have taken careful measurements and can detect length changes as small as 1 mm. More important I have proven to myself that the length changes are fairly permanent. I invested 6 months time into it. Probably 2 months was wasted. Even if I coan only gain 1 mm a month I would be satisified. My wife definitely can tell the difference.

Good luck. Patients and creativity will pay off.

What about hanging without wrap or minimal wrap?

also it seems that i either have too little skin at the base of my cock (skin stretch) or too much (skin rolls over my head).
isn’t there an easier way?

Wouldn’t somethign that attatched to the head of the penis be more effective?

I would have thought that if there is no blood in the head of the penis it is safe to apply pressure to it?

Pretty clever, sheLovesIt !!

I’m always amazed at the level of ingenuity presented at the prospect of making one’s dick bigger.

SheLovesIt,
Thanks for the wonderful “third hand” tip. Since I hurt my hand, I have not been able to wrap and so had given up on hanging for a while. Just tried this and I managed to get wrapped with just my left hand, and I am hanging now (albeit at a lower weight because the wrap was not a good one, but it will get better…)

Cas,
I would much rather hang without wrap. I found it more comfortable and easier, but, I had a problem where I twisted inside the hanger as soon as weight was applied. BIB said this was a bad thing, so I had to wrap. And of course the wrapping is what gives me all the trouble. If you don’t twist, I would encourage you to try it without wrap - one less big hassle factor to deal with. I also had the skin thing you mention. All I can offer is how I wrap now.

I hold my dick with two fingers on the head, top and bottom, and pull it out straight as hard as I can. The stretching while wrapping pretty much eliminates the skin stretch problems you mentioned. Then I wrap a small cotton strip of cloth (about 1 inch by 6) tight around the head, then wrap theraband starting over the cotton down about 1/2 way along my shaft and back up. I wrap about 2/3 of the head in this process. Then I squeeze the base to get the head to expand (BIB suggested this I think). I attach the BIB about 1/2 to 1 inch behind the coronal ridge, and I squeeze the head a bit while I tighten the BIB. My BIB is adjusted so that when on comfortably, the teeth at the top inter-mesh, but not all the way (there is still room for more tightening). I have the nuts on the bottom adjusted to get just that gap at the top. I also have one full turn more on the front bottom nut than the back one, making the BIB just a tad bigger towards the head.

All this took FOREVER to figure out, and reading all the old hanging threads (there are hundreds of them!) and posting here and trying out advice got me there. I still play with BIB adjustments the last set of every day, just in case I find something that works better and to learn what each modification actually does. I added the cotton under the theraband 2 weeks ago because the theraband was chafing my coronal ridge during the hang. I hate the added material and complication - but it was necessary and it really does work much better for me. I still get fluid buildup in the frenulum about 1/2 the time, but I can rub it out easily enough so it doesn’t stop me.

I am sure this won’t be the way you finally figure out how to hang, and I hope it gets easier for me in time too. But for now, I post it only to give you some ideas until the big boys chime in Cas.

the twist thing is no issue for me but even without the wrap I either get to tight with the skin near the base of my dick (causing only skin stretch) or get the hanger pulling skin over my head (the head ballons full of blood).

I hardly ever have a problem, you have to find the right size piece of theraband. I have two pieces folded so the cut side is toward the head and the folded side toward the base and this seems to work for me. But you have to find the rigt size for your dick.

It sounds like you may not be tightening the hanger enough.

Definately try tighting a bit more.

My trick to wrapping is I start with about an 80% erection. By the time I’ve wrapped the Theraband around and around, I’m flaccid but the skin underneath is stretched just right for me. You have to wrap fairly tightly though of course or you’ll just fall out as you go flaccid.

Good luck Cas.

FWIW, I’ve never felt the need to wrap yet. I’m hanging 7.5 lbs so far, and have no difficulty hanging w/o a wrap. If you start at 5lbs, you’ll probably find the same is true, which gives you at the very least weeks (if you’re following the suggested build-up regimen) before you get to weight that requires wrapping.

Cas,

>Well, I can’t get the stupid fucking wrap on my dick (I have two hands only people!) How am i supposed to hold back the skin with one hand and stretch the dick out with the other and then have a hand left to wrap the fuckin theraband round my dick!!<

You don’t have to hold back the skin while wrapping.

Stretch out your dick by grasping the head between the forefinger and thumb, then use the other three fingers to pin the leading edge of the wrap between the fingers and your shaft. After you wrap a couple of loops, be sure to transfer your grip from the head to the first couple of wraps.

After you are wrapped, then you can pull back the skin from under the wrap toward the base if you wish.

>I attatch the hanger in all sorts of positions but it just cuts of circularion and only gets skin stretch. <

Go into detail concerning this and I will try to help you.

>In all the time i’ve had the hanger i’m almost ready to throw the damn thing out the window but id thought id do a last grasp effort here.<

If you have had it less than a month, you can return it for a refund.

>Is the hanger only for some people?<

I know for a fact it is possible for any PE to help only one-half of the population gain penis length.

>Also am I wrapping properly?<

Be more explicit.

>I have long strips of thereband and it takes decades to wrap the thing around.<

Sounds as if you may be trying to use too much Theraband.

Bigger

Cas-
>What about hanging without wrap or minimal wrap?<

Both of these ideas worked for me with the Bib Starter

>the twist thing is no issue for me but even without the wrap I either get to tight with the skin near the base of my dick (causing only skin stretch) or get the hanger pulling skin over my head (the head ballons full of blood).<

Both of these issues - too much skin-stretch and glans engorgement became distant memories for me when I got the nerve to genuinely “tighten” my Bib.
Cas, the fact that you aren’t twisting puts you well ahead of the game. Here’s what worked for me when I wanted to hang without wrap using my Bib:
Place your unwrapped penis into the hanger while holding a mild flaccid stretch (holding from the head). Close the hanger - your current settings should already provide you with a gentle hug at this point. Pull back all the excess skin that you can toward your body. Squeeze as much blood out of your glans as possible and further tighten the hanger until you feel a considerable hug on your penis. Hold the hanger by its strap and gently pull out, away from your body. If you notice that you are getting more skin stretch than anything else, stop pulling and tighten some more. Repeat this process until you’re satisfied. You may even want to incrementally tighten the hanger while holding it by the strap with your penis perpendicular to your body. This always seemed to lessen the room for error in my case.

Also, don’t underestimate the power of applying heat before this process. Warming the skin and internal structures of the penis will keep things loose and relaxed. I can’t think of many things less appealing than applying all of that clamping pressure to a cold penis.
deSol makes a great point about using minimal weight during your learning curve. If you can learn to hang without wrapping at lower weights and you can refine the process as you increase your weight over time, you are golden. If you have a need for wrap try using a minimal amount. It worked for me.

—Cap