Suspicious Kaplan pump site

I’ve been looking at pumps recently and I’m going to buy one soon. What is the difference between the kaplan pumps with "white" pump handles and the ones with "black" pump handles other than $60 difference in price and the box design? Also is there a better setup I could get than a kaplans manual system without spending tons of cash? (Just for reference the black handle pump and a 16oz bottle of lube will cost close to $95 when buying from ebay or https://www.drkaplanpumps.com when you include S/H cost)

As for prices this is what I have come up with as far as internet purchasing with a Yahoo search for "dr joel penis pump". The *only* difference seems to be color and about $60 :P..

(Black handles)
$55 ebay search:"dr joel penis pump"
$60 http://store.usa-electronics/
$70 http://www.drkaplanpumps.com/
$73 http://www.jnoutlet.com/
$100 http://www.adameve.com/
$123 http://shop.xxxpresstoys.com/
$130 http://shop.tootimid.com/

(White handles)
$124 http://www.rubbererotica.net/
$138 http://www.nitetimetoys.com/
$150 http://www.dotcomsexshop.com/
$158 http://adulttoyonline.com/
$162 http://www.eroticshopping.com/
$163 http://ww2.sextoysex.com/
$163 http://www.secondnirvana.com/
$176 http://www.aztrx.com/
$185 http://www.erosboutique.org/

I am too impatient to wait for replies :P I bought the 2" kit, 16oz lube and pills from https://www.drkaplanpumps.com for $108. Just buying the 2" kit and lube would have been $98 but by getting the order over $100 S/H was free making the pills "cheap" to buy in my mind just hope they are worth it.

Had a problem with my order to https://www.drkaplanpumps.com as I was paying with PayPal and didn’t have my address confirmed. It was innocent enough on my part (trys to look innocent LOL). The zip code at the address I live at changed and having noticed my "old" zip code on the paypal order form I went to the paypal website and added an address that had the corrected zip code *but* didn’t confirm it. Needless to say I got an email saying they wanted to refund my money because the address was not confirmed.. They refunded, I confirmed that address on the PayPal website and sent in a new order. Very painless :P I’ll let you know about the products I’m getting as soon as they arrive but as far as ordering kaplan products I’ll recommend this site based on the experience I’ve had.

Is this a joke?
How to measure your Penis Enlargement Cylinder Size | LA Pump
Look at the Penis Outside (circumference) charts.. Starting from 5,5" to 25 1/4 "!! 25 1/4!!
Uh?

JD

Bought my kaplan pump on eBay for~ $60 + s+h @ and assuming that the meter measuring the vacuum is accurately calibrated, the unit is finest kind.

N.b.: MDs are both notoriously cheap and unsophisticated in business matters, thus kaplan’s amateurish site is not surprising. It is sad that kaplan is pimping PE pills- sort of undermines the legitimacy of the whole thing to the uninitiated..

A.

JD,

Those humongous circumference sizes and 8" diameter tubes are for those extreme pumpers who like to pump their dick and mostly their ballsac together to huge proportions.

P

Hey everyone,

I went looking for a pump the other day - I’ve decided as I come to the end of my first month of PE (doing the beginners routine plus a little edging with a cock ring), that I want to replace my edging with pumping. Anyway, I ended up looking at what this store had and the Kaplan seemed to be the most reasonably priced, with all the features I’d need. They only had the one with the 2” diameter cylinder though (although at the time I didn’t know the pack came in a 1.75” too).

Anyway, my erect girth is only like 4.5” (which ashamedly isn’t even on the chart at that sizing page several of you have posted links to) and when I tried to use it for the first time the other night, it sucked in like an inch and a half of pelvic flesh - bordered on sucking a nut in, and was kinda uncomfortable. On that sizing page, they recommend like a 1.75” diameter for a 5.5” girth I think. What’s the go here? Kaplan however doesn’t even offer a cylinder under 1.75”.

Now, I’m pretty desperate to start pumping. So I guess I have a few questions.. (I’m real sorry if I’m asking things over again - I know I’ve seen a couple of these questions before but I didn’t seem to find the answers)..

1. Are there other makes of cylinder that will work with a Kaplan pump?
2. Is there any way I can successfully use what I’ve got? (Did I accidentally just use too much lube or something?) Is there really gonna be THAT much difference between a 1.75” and a 2” tube?
3. Anyone know where I can buy a cylinder in Australia, preferably Qld, so that I don’t have to have it mailed to my house, or so I can at least get it a little quicker?

Thanks everyone.

Oh that’s right - the other thing I was gonna ask is..

My penis has an upward curve - which I like - but I get the impression that with a narrower cylinder the head is gonna be pressed pretty hard into the side of the cylinder when I’m fully erect. Is this gonna be a problem?

Question#1 . I don’t have a Kaplan pump, so I’m not sure if other cylinders w/connectors will attach in the same way. Hopefully, someone else will jump in with an answer.
Question #2. You can tie or cinch off your ballsac so that it can’t be sucked into the cylinder. Keep the lube off your sac, so there’s less likelihood of it sliding into the tube. And yes, there is a big difference between a 1.75” and 2” diameter tube (i.e. over 3/4 inch more of circumference)
Questions #3. Hey you pumper Aussies out there, help Frank out.

Peforeal in Hawaii

I have been a pumper for 4 years, with a Kaplan Pump and tubes. I was going to buy a better fitting tube, BUT I was going to buy a connector for the new pump to attached to the hose. I don’t know if all pump connectors are the same, I was not going to get a pump and not being able to use it. I was being prepared. And yes ball sack in the tub is awful. I got a silicone gasket from Xandria and it works great with my tubes. The biggest problem Is I didnt give the right measurements so my tube is too big. Going to take some measurements and sell my tubes (after I sanitize them).

Peforeal,

What about the fact that when I pumped, despite not actually ending up with a nut in the tube, I had over an inch of pelvic flesh being sucked in? Is that gonna affect gains, or is that ok when that happens? Because I gotta admit, most of the discomfort I felt I think was around my pelvis more so that my penis itself..

Cheers,
Frank.

FrankT,

If that’s the major problem and you’re concerned about it, then you should get the smaller 1.75” diameter tube and use it until the girth at the base of your dick has expanded. This will minimize the pelvic flesh pull that you’re experiencing. Later you can move up again into the larger 2” tube.

Also, check your vacuum pressure. Perhaps the pressure on your pelvic area is too much.

Peforeal

Hi again guys,

Well.. I’m back today to report some extreme foolishness on my part. I dropped in at another adult store I remembered about in my area after work yesterday - and guess what, they had a couple of cylinders in stock - a 2.25” and a 2.75”.

They also had the Kaplan pack for almost twice what I paid - only, I noticed the box was smaller. I took a closer look at the tube it came with and not only was it marked (unlike in mine) 2.25” - it was also considerably smaller than that one I have. I figured somehow my pack must have had a 2.75” or something.

Anyway, after the attendant phoned around to their other stores looking for a 2” tube and not finding one (one of the stores had a 1.75” but it was a Falcon or San Fran or something ‘cause it was like AU$140), I bought their 2.25”. When I got home I measured the one I had - I think it’s a 2.5”.

Oh - by the way - the one I got was a Colt, only AU$37. It claimed to have a “universal” connector, and looked exactly like the connector on the Kaplan tube, but the hose didn’t fit. Rather than get a new hose as well though, I managed to unscrew the valve on each and swap them.. That worked.

I went on to have my first successful pump. The tube is still a bit too big, but I don’t think I’d like to go as low as 1.75” anyway. And I found that it didn’t really suck much pelvic flesh in if I was a little more careful with the application of lube (I’m using Dove moisturizer for all my exercises). It wasn’t uncomfortable like the other tube was either.

Anyway, given that I’m planning on really working out and making some serious gains, I figure sooner rather than later I’ll need this size anyway so I’m gonna continue using it for now.

I just thought I’d end my post with the routine I tried last night - comments would be VERY welcome.. (Some background first - I have trouble maintaining my level of erection during exercises even with porn on - I typically jerk it till it’s hard, let it ease back to a level JUST comfortable to jelq, and then jelq as hard as I can until it’s too soft to - doing kegels along the way).

- I showered and warmed it all up with a hot wrap.
- I started with some stretches - two 30 second stretches in each direction (up, down, left, right).
- I hardened it up and jelqed for till it went down (about 10 min in all).
- I hardened it up again, and pumped it up to 5Hg - held that for 10 min, spending the last 3 min pumping to 7Hg for short periods, then releasing it to 5Hg again.
- I hardened it up and jelqed till it went down another 2 times (about another 20 min in total).
- I applied a heat pack afterwards.

Anyway, thanks for reading guys..
-Frank.