Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Ball Zinger

Ball Zinger

Hi

I want to build my own ball zinger, but I cannot find pure zinc in South Africa. I found a comment on Tom Hubbard’s Penis workshop ( ~ Penis workshop) from a German guy that recommends other metals that has a higher voltage.

Has anyone tested this? Can I completely replace all the metals with say Magnesium and Silver?

You can buy zingers, or the parts for them, at this web site:

www. enlargementworkz. com/store/

Mine has zinc, silver, and some magnets.


Last edited by sleepy278 : 05-23-2012 at .

I live at your latitude in South America, equally removed from the conveniences of North America. I made one today with a piece of copper tube I begged off the guy who installed an air conditioner, and the casing of a AAA carbon-zinc battery. Since it’s cold here, not much sweat going on, so I’m thinking of making some DIY conductive gel .

The carbon-zinc battery will NOT say "alkaline" on it (don’t mess with those!), may say "heavy duty." I cut off the outside plastic, used a hack saw to cut off the ends, and a flat screwdriver to get out the carbon and paper liner—very messy stuff, but washes off. How pure is the zinc? No idea!

Just found this: “The anode portion of a zinc chloride battery is a pure zinc can” in a Rayovac zinc chloride battery.

Source:

Extracting zinc from batteries

Zinc alloy wheel weights made to EU specs contain no lead. However, what they lack in lead they make up for in aluminum:

Zinc wheel weights

NAME: Eastern Alloys, Inc.
PRODUCT NAME: Zinc Casting Alloys DATE PREPARED: 05/28/1998
and high purity Zinc Brighteners Last Review Date: 09/21/06

Weight Percent

Zinc 71.5- 96 %
Aluminum 2 - 28 %
Copper 0 - 11.5 %

SOURCE

Originally Posted by sleepy278
You can buy zingers, or the parts for them, at this web site:

Www. Enlargementworkz. Com/store/

Mine has zinc, silver, and some magnets.

Hi Sleepy278,

I am want to build one ball zinger using the same materials of your device.
But I want to know it works if I change the zinc to aluminum. To the combination silver and aluminum.
And the magnets? How to join them? Can I use neodymium magnets? How much time can use this.

Thank you,

Mac.

Originally Posted by Micc
But I want to know it works if I change the zinc to aluminum.

Zinc is a healthy thing for your body. Aluminum is the opposite. I would stay away from it.

Tom,

Thanks for the advice.
And how about the magnets to increase the blood circulation,
The neodymium is good? How can I use them?

Originally Posted by Micc
Tom,

Thanks for the advice.
And how about the magnets to increase the blood circulation,
The neodymium is good? How can I use them?

I know very little about magnets, unfortunately, so can’t help you there. You can get cheap neodymium magnets from dx.com or dhgate.com .

When I look at the spherical ones arranged in a circle, I think "magnetic cock ring" … hmmm … this could be interesting.

Originally Posted by Tom Hubbard
Extracting zinc from batteries

Zinc alloy wheel weights made to EU specs contain no lead. However, what they lack in lead they make up for in aluminum:

Zinc wheel weights

NAME: Eastern Alloys, Inc.
PRODUCT NAME: Zinc Casting Alloys DATE PREPARED: 05/28/1998
and high purity Zinc Brighteners Last Review Date: 09/21/06

Weight Percent

Zinc 71.5- 96 %
Aluminum 2 - 28 %
Copper 0 - 11.5 %

SOURCE

I tried getting some out of batteries and it’s easy enough but very messy.

What is this zinger supposed to actually do? Another article here stated that it cured ED but I find that a little hard to believe since nothing so far has done anything for my type of ED. Nonetheless, the guy that posted that it gave him a raging morning erection even after having long time ED problems.
I going to try this but I’m not getting my hopes up too high.


My current dimensions: flaccid: 8" x 6.5" erect: 9.5" x 7.125" glans: soft length:1.825" soft diameter 1.65" firm length:2.286" firm diameter:1.90"

Goal: flaccid: 9" x 7" (.1" length .5" girth) erect: 10" x 8" ( .5" length 1" girth) glans: soft length: 2.25" soft diameter: 2" firm length: 2.5" firm diameter: 2.25"

Ultimate goal: flaccid: 10" x 8" erect: 11.5" x 9.75" glans: soft length: 2.5" soft diameter: 2.25" firm length: 4" firm diameter: 3" In other words: A big, fat elephant cock!

Originally Posted by Tom Hubbard
Extracting zinc from batteries

Zinc alloy wheel weights made to EU specs contain no lead. However, what they lack in lead they make up for in aluminum:

Zinc wheel weights

NAME: Eastern Alloys, Inc.
PRODUCT NAME: Zinc Casting Alloys DATE PREPARED: 05/28/1998
And high purity Zinc Brighteners Last Review Date: 09/21/06

Weight Percent

Zinc 71.5- 96 %
Aluminum 2 - 28 %
Copper 0 - 11.5 %

SOURCE

If extracted from the batteries, it can be melted to make the metal bar?


nov.2010: BPEL 14,5cm; nov.2013: BPEL 17,5cm; aprill 2016: BPEL 18,5cm; First Goal: BPEL (20,5) MSEG (16,0) FL (15,0)

Iam thinking about buying a Ball Zinger, does it really work?

Originally Posted by Micc

If extracted from the batteries, it can be melted to make the metal bar?

It’s in sheet metal form; why not use it as is?

Originally Posted by shi town
Iam thinking about buying a Ball Zinger, does it really work?

This question has long been the cause of fast and furious debates. You’ll note on my site that I make no claims; my purpose is simply to save you from buying something clunkier, and much more expensive.

In warm weather I can feel it (moist skin); in cool weather not. Which reminds me, we’re into warm weather—now where the hell is that thing?

Top
Similar Threads 
ThreadStarterForumRepliesLast Post
Silicone VS Latex Ball ZingerfreshmeatsPenis Enlargement Basics802-13-2009 07:04 AM
Ball Zinger - Question for VetsyaogPenis Enlargement Basics412-29-2005 08:00 PM
Ball Zinger construction questionslegolasPenis Enlargement Basics1301-26-2005 02:19 AM
Ball zingermmPenis Enlargement101-09-2004 02:01 AM
Ball Zinger has helped my impotence!balz2Penis Enlargement1408-31-2002 10:03 PM

All times are GMT. The time now is 02:34 AM.