Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Easy All Day Hanger

Originally Posted by LGHanger
I had some remnant material that I made a 1 lb ring last night. I used some 20 lb magnets to hold it together. Worked great!

Woah. That looks awesome.

magnets

Originally Posted by Don Logan
That’s beautiful work. So, those are rare earth magnets or what kind? Do you pry the ring apart fairly easily?

Thanks for the compliment. They are rare earth magnets and to be honest those ones are way too strong! It’s difficult to pull it apart - LoL.
So I’m getting 6.8 lb rated and will test them.

Originally Posted by LGHanger
Thanks for the compliment. They are rare earth magnets and to be honest those ones are way too strong! It’s difficult to pull it apart - LoL.
So I’m getting 6.8 lb rated and will test them.

Sign me up to be the first to try them!!!

Schweet!


“If you aren’t gaining you have to look at what is going on, get your head out of the sand and look at what you are doing. If you dick is a bit plumper after PE but it isn’t at least heading towards sore, you’re masturbating! The game here is PE and PE is about creating controlled trauma".

-memento

I’m interested, too. Yes, I know how strong those magnets can be, so I’m interested in weaker ones, if you develop that.

rare earth magnets

Originally Posted by Don Logan
I’m interested, too. Yes, I know how strong those magnets can be, so I’m interested in weaker ones, if you develop that.

The ones I used were rated 20+ pounds. I think the 6.8 rated ones will work much better…. we shall see.

Four sizes - 1 1/2 lbs

Just an update…
I’ve been able to make all four sizes that fit our Girth Bands. Each ring weighs 1 1/2 lbs.
I have been testing for the past two days and I’m happy to report they work great! I do my regular hang session for an hour and then put on an ADS weight ring. I’ve actually been able to wear two at the same time, one behind the other. Wore them throughout the day for 2 hour stretches before I needed to urinate. They’re very easy to get on and off.

I’ll be order a 12’ft length of stock along with all the magnets needed. I plan on making 25 of each size, getting them electroless nickle plated and then put them on our website for sale. Will see how the PE community responds before I jump in with both feet and make more than 25 each.
Went to a flush mount magnet, very easy to align when installing. The magnets are 7 lb pull and are more than strong enough to hold the two halves together. During testing I would swing my dick back and forth, up and down and the weight would not come off. The grip the Girth Bands provides is perfect, and the amount of compression is just enough to not cause any circulation problems.

IMG_3438.webp
(377.1 KB, 69 views)
IMG_3439.webp
(456.9 KB, 65 views)
IMG_3459.webp
(309.9 KB, 63 views)
IMG_3461.webp
(467.1 KB, 48 views)
IMG_3460.webp
(359.6 KB, 59 views)

Those products look really good man. I really like the idea of the silicone sheath as well.

Can the OP please post a link to the shaft collars? Cant find any with substantial weight to them.


Started BPFSL: 7.2"; BPEL: 7.25"; MSEG: 5.13"; BEG: 5"

Current BPFSL: 8.625"; BPEL: 8.0"; HEG: 5.375"; MSEG: 5.25"; BEG: 5"

Initial Goal : 9 x 6

Originally Posted by LGHanger
Just an update…
I’ve been able to make all four sizes that fit our Girth Bands. Each ring weighs 1 1/2 lbs.
I have been testing for the past two days and I’m happy to report they work great! I do my regular hang session for an hour and then put on an ADS weight ring. I’ve actually been able to wear two at the same time, one behind the other. Wore them throughout the day for 2 hour stretches before I needed to urinate. They’re very easy to get on and off.

I’ll be order a 12’ft length of stock along with all the magnets needed. I plan on making 25 of each size, getting them electroless nickle plated and then put them on our website for sale. Will see how the PE community responds before I jump in with both feet and make more than 25 each.
Went to a flush mount magnet, very easy to align when installing. The magnets are 7 lb pull and are more than strong enough to hold the two halves together. During testing I would swing my dick back and forth, up and down and the weight would not come off. The grip the Girth Bands provides is perfect, and the amount of compression is just enough to not cause any circulation problems.

Also, is there any chance you would offer shipping to the UK on these?


Started BPFSL: 7.2"; BPEL: 7.25"; MSEG: 5.13"; BEG: 5"

Current BPFSL: 8.625"; BPEL: 8.0"; HEG: 5.375"; MSEG: 5.25"; BEG: 5"

Initial Goal : 9 x 6

shipping

Originally Posted by dicksoonthick
Also, is there any chance you would offer shipping to the UK on these?

We ship all around the world, and frequently to the UK
It might be a couple months before these are available. Getting all the necessary tooling and materials takes a little time, not to mention manufacturing all of it. Plating alone could take a couple weeks depending on the vendor’s backlog and how busy they currently are. But we are excited to get rolling and offer another innovative PE device. All the interest in a weighted ring motivated me to develop something. I thank the Thunder’sPlace forum members for the inspiration!

LG, i’m interested into your weighted girth bands as well, i’m hoping they can produce gain without any other pe exercise.


PhoenixNow Progress Reports

Started August 2018: BPEL/MEG 5.7" x 5" - Now: 6.1" x 5.25" BEG: 6.25"

Goal: BPEL/MEG 8.5" x 6.5"

LG makes fantastic products with top notch quality! These will be amazing I’m sure of it!!


“If you aren’t gaining you have to look at what is going on, get your head out of the sand and look at what you are doing. If you dick is a bit plumper after PE but it isn’t at least heading towards sore, you’re masturbating! The game here is PE and PE is about creating controlled trauma".

-memento

Originally Posted by LGHanger
Difficult to say… It all depends on incoming orders. They are first priority, and as time permits I work on developing new stuff, of which I already have one other project in process (the 1” wide girth clamp).

This device however is pretty easy to manufacture. I just ordered some raw material and hopefully within a couple weeks will have some prototypes.
I want to make four different sizes that fit the outside diameter of our LGH Girth Bands. While offering two different weights - 1 lb and 2 lbs.
Once I have everything figured out the end product will be electroless nickle plated or black oxide to prevent it from rusting.

I had some remnant material that I made a 1 lb ring last night. I used some 20 lb magnets to hold it together. Worked great!

There are 1lb rings online that use magnets, mainly ballsack rings. A thorough search almost had me purchasing a few but the magnet problem. Your idea with rare earth magnets might work. The problem is though the amount of weight riding down on the glans. Solving that is what I’m trying to figure out now. Girth bands will cause circulation issues, hell even wrapping my sock cloth too right causes issues. Think about where the weight setting on the shaft can be most beneficial and keeping it there (not sliding down and riding behind the glans) is the ideal solution. I’d love to buy something that could go up to 5lbs all day. Shaft collars aren’t the end all be all, I’d like to find a better way.


09-01-07= 6" Bpel & 4.5"

01-10-20 = 8&1/4" x 6"

Originally Posted by dicksoonthick
Those products look really good man. I really like the idea of the silicone sheath as well.

Can the OP please post a link to the shaft collars? Cant find any with substantial weight to them.

The smaller ones I started with were 1/4lb each, the three I use now are 1/3rd lb ea. Want more weight, buy more of them. I’m not someone who needs a lot of weight to become fatigued so 1lb worth of these for 8+ hours a day is more than enough right now. I’ve been trying to add another 1/4 or 1/3rd lb ring for a month and I still get too fatigued by just 1lb of them.

For those of you who need more, try a daily routine of three 10 minute sets with your heaviest weight using a bib or vac hanger in the morning then throw on a 1/2lb or more of these for the next 8 hours, taking breaks after 2 hours or so. I remove the rings every three hours to massage it then put it back on. Sometimes I can’t get past 6 hours, sometimes I can do 10.


09-01-07= 6" Bpel & 4.5"

01-10-20 = 8&1/4" x 6"

The Craftsmanship looks amazing. But how do you wear these 8 hours a day in public without people noticing a fire hydrant in your pants? Or is the intention not to use these when you are out in public?


Starting (07/15/20): BPEL 6.5” BPFSL 6.5” MSEG 4.75” BEG 4.75” BPFL 4.5”

Current (10/27/20): BPEL 7.0” BPFSL 7.5” MSEG 5.0”+ BEG 5.25” BPFL 5.25-5.75”

Goal: BPEL 7.5” MSEG 5.5” BEG 6.0” BPFL 6.5”

Originally Posted by Stixman
The Craftsmanship looks amazing. But how do you wear these 8 hours a day in public without people noticing a fire hydrant in your pants? Or is the intention not to use these when you are out in public?

Thats part of the problem with the big rings LG has and the ones I wasted money on. I’m going to post a photo of the ones that work perfectly for me and don’t look ridiculous. The pic is of the smaller ones, they weigh 4.2oz each. Four of them make a pound.

20200916_112522.webp
(436.7 KB, 116 views)

09-01-07= 6" Bpel & 4.5"

01-10-20 = 8&1/4" x 6"

Top

All times are GMT. The time now is 03:12 AM.