Homemade Hanger Models and Instructions

You want a little bit in the glans because it will act like a “plug” of sorts that will help keep the hanger from sliding down as much.

I made an ADS hanger using shoelace, surgical tubing and fishing weights.

I cut a length of tubing sufficient to go around my crank behind the glans when flaccid, then threaded a 30” dress shoelace through it. The noose is completed with a slip knot, and once pulled tight the tube-loop remains one size.

The tubing isn’t as galling as a shoelace noose and can be worn for long periods without discomfort.

I made a Velcro strap that goes around my calf below the knee and slip the weights through it beneath my trousers.

I wear mine up to 16 hours a day as an adjunct to my heavy hang sessions and if Bib’s saga is any guide should yield results.

I will have to start creating a concept for a compression hanger to compliment my weight system. I do want to incorporate bundle functionality, among other modifications. I currently only do vertical hanging with a pulley setup, so I have no issues with bars/arms, but would prefer to make them detachable just in case I ever feel the need to do free hanging.

I made a simple ADS, using a DIY vac chamber, sleeve, and knee strap. I have used it at work a couple of times for around 5-6 hours. It works great. First experience with an ADS, and I can see how it can be a beneficial tool for passive elongation.

I have made my own penis hanger. I think it works well. I feel a really nice stretch at the base of my penis while using it. And not only can I hang weights around it, but I can use it as an all day stretch as well.

I bought all the material from Lowe’s, and Wal-Mart. I think it was pretty cheap for what a commercial one goes for.

Material list

1-Flexible PVC coupling $4.58

1- 8 inch by two inch piece of sweatshirt

1- 36 inch lighting chain 5.98

1 pack of small “s” hooks

1 thin Resistance band

1-1 inch wide Velcro

Cut the the metal off the flexible pvc coupling and keep the rubber and at least one of the rings. Cut the rubber down the middle so you can pull it apart. Use about three inches of the Velcro. Put one inch of Velcro on each side of the cut. And use the other side to to close up the gap when your penis is in it. Drill two holes on either side of the cut, and put the small “s” hooks through them. After you wrap your penis with the band and then sweatshirt, you put it in the rubber piece. And close it up using the Velcro. If you’re doing a heavy day use the ring to make it tighter. Use the chain to run through the weight, and hook the ends to the “s” hooks. Now you’re hanging. I also put on a knee brace and wrap the chain around my leg, then hook it to the unit, for all day stretching. Depending on how long the chain is you can stretch in any direction. I have several chains ranging from 10 inches to two feet. I use them depending on how I’m stretching.

If anyone is interested, let me know on here and I can post some pictures.

Also, I’d like feedback on It, if anyone wants to give me their opinion.

Finally made a hanger that works well!

I originally made the CCH3 that chickenchocker designed and it was hard for me to place my penis into it because I couldn’t get the mason line right.

Then I thought screw it I’ll just buy one from Bib. I went to his page and even emailed him with some questions.

The problem was going to be, that my credit card has a different address; “my parent’s house where I grew up” than where I live now.

Whichever address the credit card is, is where it would be delivered.

Don’t want that..

The best solution would have been to send a money order, but I didn’t want that to get lost in the mail or stolen; even if the post office would refund.

So, I was stumped..

I then saw that Piet revamped Tom Hubbard’s AFB hanger and put easy to see pictures.

I decided to see if I could make the AFB and went to home depot.

I thought, I should probably use wood for the two sides that are actually going onto my penis instead of metal. (Don’t want to get hurt).

I found a door trim that would work great, I just had to figure out how to cut it to the right length.

I decided to not buy it because I started to look into buying a saw just for this project to cut it, and things were getting expensive and out of hand.

Luckily, I kept the CCH3 intact; while trying to find another solution. So, I figured why not use the PVC from that and drill holes for the bolts. Then use wing nuts to tighten.

I got home and made it and it works great.

I didn’t name it and since the design came from multiple places, I don’t take credit.

All the guys I mentioned in this post are the really heroes.

Hi
I like to know what is difference between - malehanger - bib hanger - penis hanger - apply some pictures
I m interested to bay one new

My experience

I use my home made lg hanger like original with perfect dimensions for me
I start with 2kg evry week I add 500 gram I use this for 6 months finish with 7 kg and I gain 5mm in lenght
But I have blisters some time for this reasons I like to bay decompression hanger

Before hanging I use only bathemate x40 about 3 years and I have gain only 5 mm in length and more in girth
But after use bathemate x40 evry time I don’t have quality erection cople days the problem is high pressure

I sold my bathemate x40 and bay air pump with pressure gauge is the best - model - Thickwall Cylinders or leluv pump

I need some help designing a hanger that looks like this, can anyone help out with what materials would be needed?

I went for an option that needed as little work as possible. I bought these

Tesla 32-36mm Rubber-Lined Pipe Clips Black / Steel 5 Pack | Pipe Clips | Screwfix.com
An s hook
And a piece of string

Process.

Tie a piece of string around the screws at each side of the pipe clip, link above. So there is a loop of string coming from then pipe clip

Get an s hook. Get a piece of string and tie loops on both ends of the string. Put one loop on the bottom of the s hook. Put the other side through some weights and put the loop on the hook. You now have weights hanging from the hook.

Put what ever wrap you want on your dick first. The wrap in the 101 guide works for me

Attach the pipe clip to your dick on top of the wrap. To achieve this completely loosen one screw and half loosen the other screw put over your wrap then tighten screws. Then attach the top of the s hook to the string loop on your pipe clip.

You are now hanging. Not sure if that reads well but it is a very easy option to go for!

Takes a while to get used to the screws and wrap etc but it is a low cost and low build option. Also you can quickly get the weights off and put your dick away if you get disturbed. Being doing it for a few weeks working through the 101 routine and it is going well.

Scienceguy- thanks for sharing. I might give this a go myself!

Sounds cool. It would be great if you could post pictures please. Thanks in advance.

I made a Bib hanger from the instructions posted on this site. This version use a metal band clamp so it’s not as quick for me to put on and take off, so your idea of using Velcro (with the ring?) may be easier. I’ve been hanging average 8-10 hrs straight daily for 2 weeks with close to 1pound and have seen an obvious lengthening in flaccid state so will continue this way. Going to try a Velcro below the knee for hanging.

Unless those weights are at least a couple of pounds, I personally wouldn’t expect much from it. People may not believe it, but most of the ADS devices pull with a substantial amount of force. YMMV though.

Tom’s design is good and honestly, the most of the good designs are in some way based on his. Yours should be fine. I personally would alter it just a little to make putting it on and taking it off easier (such as cutting a notch in one end of one side to allow the bolt to pop out of the top quickly), but it will do the job!

Be very careful with any hanger that compresses the top of the penis. You can maybe get away with using one at lower weights - I used the diy hanger on Bib’s site that uses a hose clamp, and it worked pretty good up to around 5-7lbs, but beyond that, I had to switch to something more comfortable (and safe).

I made a very simple hanger with some stuff from around the house. I use the lghanger silicone girthband as a wrapping, on top of 3m micro pore tape.