Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

LG Hanger, a new vacuum hanger

Small vacuum cups

Originally Posted by StrangerComeKno
Yeah, that’s how I was wrapping to begin with. Then reading forums it seemed like a lot of guys were suggesting to compress the head and I started doing that. They probably didn’t have an LG that was custom fitted to their size though. I want to switch back to your method, but now I’m concerned I have missed out on getting properly conditioned. Think I should I start back at 3lbs? Thanks.

You’re correct about many guys wrapping tight just so they can fit into the shallow cups that come with all the other vacuum based weight hangers and extenders. Which is why LGH chambers are custom fit with room for expansion and growth. It’s important to have a properly fitting chamber! LGH chambers are much deeper too, a nuanced design feature that is often overlooked or not recognized. The traction pull emanates from the shaft behind the glans and not the glans itself.

Originally Posted by LGHanger
Almost done with all the machining on our new 1 1/2 lb. Weight rings (four sizes). Next week they will all be going down to my plating vendor to get electroless nickel plated.

Is this supposed to work as an ADS? Very interesting. I have always wanted something like this but was afraid it would pinch my junk. Are these going to be custom made?

LGH Weight Rings

Originally Posted by gomitadelimon
Is this supposed to work as an ADS? Very interesting. I have always wanted something like this but was afraid it would pinch my junk. Are these going to be custom made?

Yes… the weight rings are considered to be an ADS type supplement to more intense PE training. They’re for sale on our website - Pg. 4. We haven’t officially released them, we wanted to give current LGH customers first crack at the introductory price. I only made 100 units (four sizes - 25 of each). I wanted to see how they sell within the PE community before I embark on a larger production run. You can see a demonstration video on our blog, just go to search bar and type in “weight ring”.

You shouldn’t have any concerns or fears over “pinching my junk”, provided you wear a section of silicon sleeve or Girth Band under the ring itself as shown. That will prevent any skin pinch and also help provide grip.
I manufacture these rings on my C.N.C. lathe and mill. Four different sizes, all of which are 1 1/2 lb.

single.webp
(202.4 KB, 80 views)
double.webp
(130.3 KB, 51 views)
IMG_3459.webp
(309.5 KB, 52 views)

Hi LG Hanger, I have seen you write before that you follow your vacuum hanging sessions with manual stretching. Can you please go into detail about what kind of grip do you use for the manual stretching? I am wondering this because with the vacuum hanger, you would be getting less of a skin stretch, more of a tunica/ligament stretch. So your manual stretching grip would have to be effective in order to compare to the effectiveness of the vacuum hanger stretch. Thank you!

Post hang manual stretching

Originally Posted by PE Guy
Hi LG Hanger, I have seen you write before that you follow your vacuum hanging sessions with manual stretching. Can you please go into detail about what kind of grip do you use for the manual stretching? I am wondering this because with the vacuum hanger, you would be getting less of a skin stretch, more of a tunica/ligament stretch. So your manual stretching grip would have to be effective in order to compare to the effectiveness of the vacuum hanger stretch. Thank you!

The primary objective of post hang manual stretching is to take advantage of the fatigue the hang session produces. Aggressive hand stretches after the hang will allow you to go the extra mile and get that additional flaccid stretch. Be sure to wear an ADS or a few Girth Bands after these hand stretches in order to keep your flaccid under a mild amount of traction while you recover. After a couple hours you can transition to a single Girth Band at the base.

When I do these stretches I use two Girth Bands and two hands. I position one Girth Band at the base of my penis, and the other below the glans. This enables me to get a better grip and helps prevent skin chaffing while pulling hard. If you don’t have Girth Bands, a couple sections of silicon sleeve will work too.
I use my dominate hand to pull with and my opposite hand to brace my penis at the base. I usually did between 5-10 minutes of very aggressive hand stretches in a variety of directions. When I say aggressive that means pulling as hard as you can tolerate.

IMG_2521.webp
(607.0 KB, 78 views)
IMG_2522.webp
(565.2 KB, 60 views)
IMG_2343.webp
(183.2 KB, 69 views)

Originally Posted by LGHanger
The primary objective of post hang manual stretching is to take advantage of the fatigue the hang session produces. Aggressive hand stretches after the hang will allow you to go the extra mile and get that additional flaccid stretch. Be sure to wear an ADS or a few Girth Bands after these hand stretches in order to keep your flaccid under a mild amount of traction while you recover. After a couple hours you can transition to a single Girth Band at the base.

When I do these stretches I use two Girth Bands and two hands. I position one Girth Band at the base of my penis, and the other below the glans. This enables me to get a better grip and helps prevent skin chaffing while pulling hard. If you don’t have Girth Bands, a couple sections of silicon sleeve will work too.
I use my dominate hand to pull with and my opposite hand to brace my penis at the base. I usually did between 5-10 minutes of very aggressive hand stretches in a variety of directions. When I say aggressive that means pulling as hard as you can tolerate.

Thank you for explaining that!

Excellent First Vacuum Experience

The thought and sight of hanging weights has always frightened me but finally decided to give vacuum hanging a shot.

I can say without regret the LG Hanger is totally worth the investment. The quality is second to none and most importantly feels safe to use without worrying about anything breaking and causing serious injuries.

Once getting used to wrapping, this is extremely comfortable to use and I no longer have any fears. It is so much easier than manual stretching and way more time efficient.

So if you are on the fence with vacuum hanging, I highly recommend this product. It is a big expense but considering the quality, craftsmanship, exceptional customer service, and years of research, I guarantee you will not be disappointed.

Originally Posted by LGHanger
The primary objective of post hang manual stretching is to take advantage of the fatigue the hang session produces. Aggressive hand stretches after the hang will allow you to go the extra mile and get that additional flaccid stretch. Be sure to wear an ADS or a few Girth Bands after these hand stretches in order to keep your flaccid under a mild amount of traction while you recover. After a couple hours you can transition to a single Girth Band at the base.

When I do these stretches I use two Girth Bands and two hands. I position one Girth Band at the base of my penis, and the other below the glans. This enables me to get a better grip and helps prevent skin chaffing while pulling hard. If you don’t have Girth Bands, a couple sections of silicon sleeve will work too.
I use my dominate hand to pull with and my opposite hand to brace my penis at the base. I usually did between 5-10 minutes of very aggressive hand stretches in a variety of directions. When I say aggressive that means pulling as hard as you can tolerate.

Sir I’m now hanging at 14 Pound with LG Hanger
A question please, I have read a post for you before ( I can’t find it) that before starting hanging you can rid of blood from glans by pump the glans at higher HG then relax it several times, am I get it right?

Thanks

*At maximum Hg

Leave of absence

Hey Guys - I have a family medical emergency and will be unavailable to answer forum questions from May 2nd - 13th.

Although I haven’t seen much action on this particular forum, I still want to help answer any questions while I’m away.

Please email them directly to us - LghangerLLC@hotmail.com

LGH Weight Rings

Weight Rings are becoming very popular! We have just about sold out of the first 100 I made. I have another 100 in process. We will be utilizing a new / better plating process which requires some “rack” tooling that I need to make. So if you order a particular size we are out of, please be patient, any backorders will be fill ASAP.

single.webp
(202.4 KB, 18 views)
double.webp
(130.3 KB, 14 views)

LGH Weight Rings

Hey guys thanks for your patience while waiting for the weight rings. I had a family medical emergency to attend to out of state. I currently have 100 more rings at the plating vendor now and they should be ready next week, and 100 slugs being sawn up now.

Super happy to hear all the positive feedback from those who’ve purchased and are now using them as part of their weight hanging routine!

Weight Rings.webp
(123.9 KB, 40 views)
single.webp
(202.5 KB, 20 views)
double.webp
(130.4 KB, 12 views)

Priming your chamber

Originally Posted by hex13
Sir I’m now hanging at 14 Pound with LG Hanger
A question please, I have read a post for you before ( I can’t find it) that before starting hanging you can rid of blood from glans by pump the glans at higher HG then relax it several times, am I get it right?

Thanks

I’m not certain I understand your question…. but If you’re asking about how to prime your chamber prior to a weight hanging session. Then do the following before you attach the weight. Once you have your glans protection in place and the chamber is installed onto your penis. Plug the hand pump hose into the chamber. Draw out 10 -15 Hg’s of pressure, hold for 2-3 seconds and then release the pressure and repeat five more times. On the last prime go up to the desired amount of Hg vacuum pressure you want to use and then disconnect the hand pump, attach your weight and lower it slowly. Let gravity do it’s job. Priming your chamber helps expand your penis and “pack” the chamber.

Originally Posted by LGHanger
I’m not certain I understand your question…. but If you’re asking about how to prime your chamber prior to a weight hanging session. Then do the following before you attach the weight. Once you have your glans protection in place and the chamber is installed onto your penis. Plug the hand pump hose into the chamber. Draw out 10 -15 Hg’s of pressure, hold for 2-3 seconds and then release the pressure and repeat five more times. On the last prime go up to the desired amount of Hg vacuum pressure you want to use and then disconnect the hand pump, attach your weight and lower it slowly. Let gravity do it’s job. Priming your chamber helps expand your penis and “pack” the chamber.

Thanks for the answer
So my question about this ( Draw out 10 -15 Hg’s of pressure, hold for 2-3 seconds and then release the pressure and repeat five more times )
So when i attach the glans in the chamber, I pump until it reaches 15 HG’s several times? Am I getting it right? This is not dangerous even for seconds?

LG Hanger

I’ve been using the LG Hanger for a little over two months now, and I notice that my penis hangs a bit more. It’s very comfortable and easy to use. I’ve used other extenders, but they were uncomfortable, and they require a lot hours of use per session. Since you can use weight plates with the LG Hanger, I can use it 30 minutes in the morning and 30 minutes at night. I love it!

Top

All times are GMT. The time now is 05:54 AM.