Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Full Package Pumping: thoughtfulgold

Bought tallest Ball Stretcher weight and...

My usual ball stretcher is a 42mm tall and 35mm inner diameter magnetic weight. Being of genius level intellect I decided I preferred weights that required no tools because that sounds incredibly inconvenient. The tallest variety they make of this weight is a 65mm height and I went with a 35mm inner diameter because for now that is where i’m at still.

It is below.

1. Picture in my hand.
2. Comparing the old and new weights side by side.
3. Picture of it being worn: Tallest Ball Stretcher weight maiden voyage

Issue with buying a weight that’s two height classes taller (the one between them is a 54 or 56mm) is you are banking on accomodation you likely haven’t made. I bought it to inspire myself because I like it but I can’t wear it for more than an hour yet. So I’ll get back into the game with the 42mm and up my wear times. Get some of my lower hang and weight tolerance back, then start wearing the 65mm for longer than an hour. Probably not out of the house simply because of the sheer size of it though


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

Bested by the Bull Master Magnum

The title of the post pretty much explains it all. I let my pride get in the way and I miscommunicated somewhat with Dan at pump toys what my goals were and my accomplishments were as far as full package pumping. I ended up with the largest full package cylinder that he makes and probably need the smallest one that he makes because the state of my scrotum and testicles simply does not demand the sheer volume of a maximum size Bullmaster Magnum Cylinder. After this got to my house and I held it in my hands I knew that it was too much. I went online to Newark and immediately found people who are on a mission to pack this very cylinder to the top. One person is only a couple inches away and is packing it by design. Using each testicle pocket for a testicle and the penis pocket for his penis. Honestly after seeing that it nearly broke my brain. Because I can get my fist and most of my forearm into the cylinder. And there is a picture below of me doing exactly that.

I’m done with the cylinder. I attempted to use it once. I paid for the silicone seal and the maximum size. It is a $300 piece of kit. I can make a deal on it if anyone’s interested.

Sometimes you need to know your limits and know what you need because buying too much sometimes it’s completely useless.


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.


Last edited by thoughtfulgold : 02-07-2019 at .

Awesome thread. If you build it lol


Start 6 1/2 L - 4 3/4 G

Now 7 15/16 L - 5 3/8G

Goal 8.0 L - 6.0 G

Originally Posted by Duncan1
Awesome thread. If you build it lol

Honestly this is a secondary goal and other things come before this. I want to put time in with this and it just isn’t coming together right now.


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

I’ve only recently started full package pumping with a standard Bullmaster and a thought occurred to me.. This seems like a lot of body fluid to relocate to just one area that doesn’t go back for hours on end, and wondered what effect it might have on the rest of the body?

Originally Posted by veloce
I’ve only recently started full package pumping with a standard Bullmaster and a thought occurred to me.. This seems like a lot of body fluid to relocate to just one area that doesn’t go back for hours on end, and wondered what effect it might have on the rest of the body?

Well, volumetrically it doesn’t displace but a select bit into the scrotum, as fluid in it exists. And also, while it displaces fluid and blood, it doesn’t prohibit fluid travel otherwise the tissue in the tube would become necrotic.


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

Restarting again.

I sold my Bull master Magnum for a more modest tube, finally. It will be here this week. Full Package pumping will resume, again for the third time.

Additionally I’m wearing my 42mm tall weight a few hours during the day. My current pumping in a 2.5” diameter tube has me doing this to have enough scrotum for the base to expand fully without sucking in testicles. So far it hasn’t happened and shouldn’t but it would be more comfortable with a better hang.

My 65mm weight is simply too tall, I bought it prematurely and know it but hopefully pumping full package can help with this. I can wear it but only on hot days and when laying stationary.


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.


Last edited by thoughtfulgold : 03-31-2019 at .

Preview of Bull master 357

I acknowledge that a full package cylinder that I could fit my fist in up to the elbow was too much. I may have a big dick but I don’t have monster balls halfway to my knees. So I bought this cylinder below.

1. BullMaster view. Fits in one hand. Looks like my package won’t be floating in a giant, transparent void and will pressurize to shape.

2. Only fits 4 fingers, not a fist most of the way to my elbow as shown above.

More as i use it.

Bullmaster 357 view.jpg
(589.8 KB, 112 views)
Four finger bulmaster.jpg
(768.7 KB, 163 views)

Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

Maiden voyage Bullmaster 357

Visual reference here: Maiden voyage Bullmaster 357 (uncensored)

Basically this is my first run in the cylinder. I think it’s promising. The pressurization up to 5HG shows my testicles pulling out to the sides. My fear is that my cock is too big and that it may prevent my scrotum from stretching due to compression at the mouth of the cylinder. I know the underside of my scrotum is very tight when pumped in the cylinder and I feel I should be able to stretch further wider than I did this first few minutes. Tonight or tomorrow morning more likely, I will run 30 minutes at around 5HG. See how I like it.

I’ve been wearing my 42mm weight about every day on average 3 to 4 hours. The hang of the scrotum and what feels like some testicle size is improving. I feel like there’s more scrotum under the weight, like the balls are bigger and preventing more slippage than when I first started at this. Pictures of current ball hang are likely tomorrow as well.


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

First 30 minute session with BullMaster 357

First things first, the cylinder design is great. For someone who does a lot of dynamic pumping where I have an active role this is slow and boring. But it works.

I fit the cylinder perfectly. Very strong seal. Most of my 30 minutes was at 4HG, which is plenty. Around 15 minutes and my testicles were close to halfway in the pockets, centered and all. I only got a good shot of the right side as the left fogged up due to my Vaseline use.

I took some pictures of my after balls and sack but they don’t really scream progress. I felt huge, weighty changes though. So I’m sold on how the cylinder works.

Pics later today.


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

I’d love to have one.


Started 7.75x5.75

Currently: 9.75bpX6.75eg My Picture Thread

Goal:10.0bpX7.25mseg Building a thicker unit, click by click, pump by pump, jelq by jelq!

Originally Posted by Titleist
I’d love to have one.

The cylinders are readily available. They stay in stock at pumptoys.


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

Originally Posted by thoughtfulgold
I felt huge, weighty changes though. So I’m sold on how the cylinder works.

Sounds like a good time TG.


Once upon a time (2015): 6.40” x 4.50”

Today: 7.25” x 5.00”, Thunder Cocks Unite!

I think we can...Little Engine’s Climb

Originally Posted by LittleEngine
Sounds like a good time TG.

It is NOT. Full package is uncomfortable as Hell. But it is the main way forward for my aesthetic.


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

Originally Posted by thoughtfulgold
It is NOT. Full package is uncomfortable as Hell. But it is the main way forward for my aesthetic.

Man……! I was hoping it felt good and produced big gains! Typical PE, nothing comes easy:-) . Lol, I bet that is why some of us are still here;-)

Easy never quite sits exactly right.


Once upon a time (2015): 6.40” x 4.50”

Today: 7.25” x 5.00”, Thunder Cocks Unite!

I think we can...Little Engine’s Climb

Top

All times are GMT. The time now is 05:45 PM.