Cock Coil ADS

Regarding fibroblasts - time under stretch..

Well what do you guys assume happens when you make a pause of 5 minutes to reapply? Will it disturb the fibroblast process significantly?

You’ll be just fine. Viscoelastic stretch actually remains a long time, so after you reapply you will still be at a high level of stretch.

Fibroblasts are cool little cells. Achieving direct growth through stimulating them to just make more ECM is best achieved with long duration stretching. This gives them the most time to actually feel the stretch and lay down more matrix. But growth can also be achieved through plastic deformation using high forces/fulcrums. This second approach will cause the tissue to lose some integrity and not return to its original length, the fibroblasts will then remodel it back into healthy, strong(er) connective tissue. I think an easy way to look at it is coaxed vs. forced growth.

I enjoy forced growth with a little coaxed growth thrown in for balance. :)

Xeno, thanks. I will not rest until I uncover the other two secrets of the coil! :)

I’m joining the cock coil revolution. :)

Roots, I’m having trouble finding heat shrink over 4 feet that is not also over 100 feet, could you link the Amazon product you found with 10 feet of tubing?

Also, not sure if anybody posted this already, but I found a site that sells lead wire cut to length in various diameters from 1/8" up to 3/4". Would any of you go with a heavier or longer (along the shaft) coil given the choice, or is pretty much perfect the way it is?

Lead Wire by the Foot - RotoMetals

Thanks.

BeardedDragon

>Roots, I’m having trouble finding heat shrink over 4 feet that is not also over 100 feet, could you link the Amazon product you found with 10 feet of tubing?

Is there any reason why you cannot join two lengths of heatshrink with an overlap?

>Also, not sure if anybody posted this already, but I found a site that sells lead wire cut to length in various diameters from 1/8" up to 3/4". Would any of you go with a heavier or longer (along the shaft) coil given the choice, or is pretty much perfect the way it is?

>Lead Wire by the Foot - RotoMetals”

That is a great find. I would have thought going to a bigger size say 3/8" would be good but if you go too big you might find it difficult to wear for long periods if your unit finds the weight a bit much. Now I have perfected my wrap technique with golf weights I find I can wear 4 weights long term (eg 8 hours or more) with little discomfort but when I put on the extra weight it starts getting sore after about 3 or 4 hours. Not sure if it is the extra weight or the fact that the wrap point is closer to the glans and the weights are putting stress behind the corona. My intention is to get a set up that I can wear at all times I am not doing other PE or having sex ( or taking a shower)..

The concept as I understand it is you benefit both from the weight and the stretch from elongating the coil on the penis. If you can afford it I would get some different thicknesses and experiment to see how much weight your unit will take long term and if you can get a better stretch with a thicker coil.

My lead has just arrived so hopefully I can find the time to construct my first coil today..I only have 1/4" lead but am intending to try making a second larger diameter coil that goes over the top of the first as a way of experimenting with extra weight etc

Austfred assumed already that lead with only 99% (PB99) labelled as very soft might be too soft.
What do you other guys think about it? What is your lead pb?

I cant find PB100 in wireform and the PB99 is right now to expensive for me to make a fault.
I can get 8mm (1/3 inches) but only in rather big rolls :( . All others available are fish lead and too thin.

I really do not know the answer. The lead i got is pretty soft. It was sold as refined Pb without a % so I am guessing 99.9% as I suspect it would be very difficult to get to 100%. I have a suspicion the main use locally is to make rifle bullets.

What worried me about your source is that it is quoted as 99% and very soft. I was wondering if it had an additive added to make it even softer than normal lead. If that is not the case it is probably fine. Why not contact them to check.

Yeah right. Actually its standardized I read right now(http://de.wikip … H%C3%BCttenblei if interested but only in german).
And rather regulated in germany and can only be sold in fishershops with an alloy sheating. So most raw sources are industry sold only.

I will ask these guys and might take a shot at it anyway. Cant believe that it is so soft that I wont be able to use at as a coil.
They got a 5mm which is labelled PB99,94 and they also say its very soft.

They describe it further as: Without a solid base, it does not remain straight as it is, cause it is so soft.
So whatever % it is does it sound like it would fit the profile we need here?
I mean when you guys hold your lead straight out without attachment to your dick does the lead bend under its own weight?

I suppose some of that Terminator2 T-1000 alloy would be the best choice ehhehe.

dickerschwanz]

>I mean when you guys hold your lead straight out without attachment to your dick does the lead bend under its own weight?

I stretched out a couple of feet length of mine and it shows no tendency to bend under its own weight. Is soft though and easy to bend

>And rather regulated in germany and can only be sold in fishershops with an alloy sheating. So most raw sources are industry sold only.

My supplier does lead, and other metal, refining presumably from recycled lead and farmed out extruding it for wire for a guy who is into making rifle bullets so it akin to your “industry sold only” Do not think we are so heavily regulated yet. Just give it time.

>I will ask these guys and might take a shot at it anyway. Cant believe that it is so soft that I wont be able to use at as a coil.
They got a 5mm which is labelled PB99,94 and they also say its very soft.

I probably would give it a go.

Ah yeah its just a german thing to regulate everything which can be good and very bad depending on context obv. …

Anyway thanks for your test! I will report once I get it!

You guys are great!

I like to have both a 1/4” and a 3/16” diameter CC handy; depending on the circumstance, one is more appropriate than the other (sometimes both :) ).

I’m delighted by the discoveries of alternate diameters; this thing now belongs to those with the wisdom to recognize it for what it is, a tool that can be tuned to the user’s preferences.

My work here is done, the continuation of the dissemination of the utility of the CC now belongs with the spirit of inquiry of you all; wear it in health and…with gains!

Best regards,

xeno

Just made my first CC.

As I had 2 kg of 1/4” lead in one roll I had to decide how long to make it. I measured my flaccid and decided on a coil 3 1/2” long with an internal circumference of 5” which is just big enough to pull my flaccid through. I used a large maglite torch with a 5” girth as a former. l.I used the lead coated copper wire as a dummy and found 1.6 m of wire gave me a 3 1/2” coil. The coil weighs 1.25 lb and I am currently trying it out. The other thing I found is by making a custom length one I get a natural stretch simply by tightening the coils to clamp on the shaft as it also lengthens at the same time.

It sounds awesome. Like an ADS, extender, and hanging all coiled into one.

Xenolith,

We really do owe you a big thanks. Your CC concept is sheer genius because of its simplicity and usefulness.

>I like to have both a 1/4” and a 3/16” diameter CC handy; depending on the circumstance, one is more appropriate than the other (sometimes both :

Curious about in what circumstances would the 3/16” CC be weapon of choice

>I’m delighted by the discoveries of alternate diameters; this thing now belongs to those with the wisdom to recognize it for what it is, a tool that can be tuned to the user’s preferences.

Yes I think the more men that try it out the more additional benefits will be discovered.

>My work here is done, the continuation of the dissemination of the utility of the CC now belongs with the spirit of inquiry of you all; wear it in health and…with gains!

Xeno, being the father of this idea I am sure you will more great ideas about how, and how not, to use it.

I have just stumbled across your IPR Theory after coming across Bearded Dragon’s thread and I think you may have hit paydirt there as well. Need to read about it more. Keep up the good work.

Interesting device indeed. You just roll the lead around he penis? Any idea of the maximal weigh of a device like that would pratically doable?

Marinera, it would depend on low long your dick was and the diameter of the wire. With 1/4” wire I can fit a 1.6 m length on my flaccid that goes from behind my glans to the base. It weighs 1.25 lb but I do get an extra stretch simply by elongating it as I ‘screw it down to a smaller diameter to clamp my shaft. With an internal ID of 5” my CC is about 3.5” long but get quite a bit longer as I screw it down to clamp and stretch my flaccid shaft.

If I were to get a thicker lead my main concern would be if my dick could take the extra weight for long times (eg 8 hours) without a break. This is important to me when I am out and about as it might prove difficult to remove it in those circumstances. Don’t get me wrong though. It is very easy to remove by unsrewing if you have the privacy.

If you want to increase the weight and if stealth is not so big an issue you could make a second larger diameter CC that you wear over the top. It could more than double the weight and could be worn over the glans as well without even clamping there. Using 1/4” lead I reckon I might be able to get to 1.3 kg but I am not sure my dick could bear that for more than a few hours at a time. Think I will try that when get the best of my first CC.

In your case you are longer so you could load up more.

Regards
Fred