Vacuum Hanging

Ok you have my attention. That’s a great post, and a great point. I do have issues with what you are talking about(ecchymosis). I’m fine up to a certain weight, then I get what looks like a little hickey at the end of my dick. I feel like what we are talking about could be ground breaking. The tape thing is fairly new, and now its time to put our heads (no pun intended:-) together and learn the best way to do it.

Panas can you go onto more detail as to how you wrap? And that goes for everyone really. Maybe we can find that magic secret that will allow us to comfortably hang as much as a Bib user can. Right now I’m hanging 13.5lbs, and I can really feel the pressure right at the tip of my penis, which is also were I have the issue of the hickey looking thing.

Again…great post. :-)

Good post panas!

Panas,

I don’t know enough about the physics to comment on the science, but from my practical experience, I think you are on the right track.

I also have some discoloration on the tip, and it is a squeezing feeling that I get on the tip that stops my sets/stops me from going heavier.

I find that if I squish my glans in tight into the cap, and minimize the amount the glans pulls back when applying the weight, I get a more comfortable hang. Maybe the reason for this is your theory … ie being squished into the cap is making my glans flat.

Do you have any thoughts on how to tape/wrap to widen the glans?

On the other hand, could a cap be designed that keeps the glans flatter? Maybe a spring loaded, or syringe type base that somehow pushes back up against the glans? Beyond my handyman skills unfortunately :)

Good to explore this further. I agree with dlm4, being able to handle weights like I can with my bib would be very handy.

Awstev,

I experience exactly what you do. A pinching feeling at the tip. I tend to think a better cap design is whats needed. Since the cap is rounded it only makes sense for the most pressure to be condensed at the very tip. If the inside of the cap was flattened out a bit, you would re-distribute the load to a wider portion of the penis. Maybe this can be done with better wrapping techniques, or maybe by putting something inside that cap? Hmm…

Hmm…I might just try plato. That way if it doesn’t work, I can just take it out and clean the cap/hanger.

Dlm4,kimc,awstev thank you for the good words and giving me attention :-)

I’m sorry if I faulty gave you too much of hope by mentioning the ideal Proper Wrapping ,but the truth is that at this time this thing doesn’t exist .
It doesn’t exist ,but in the other hand, is waiting to be invented by us :-D.And I have the impression that this time is not far away from now.

As concerns the method I have used please read below:

With only micropore tape , maybe the most you can do to have them the widest possible, is letting them keep a sphere-like shape(instead of a bullet-like due to vertical compression from the wrap).You can do with the following bellow steps:

1.start by making a tight “ring” of micropore tape exactly under the glans.
2. Wrap by,making strips that start from the one side of the ring ,go over the glans and end in the opposite side of the ring.
3.After you have cover the glans with horizontal (to the penis) strips, secure them by making the same ring as before.If you want you can cover the glans now vertically but without compression in order to not promote a a narrow bullet shape that we are trying to avoid .

4.In order to have a benefit from the “widening” ,the lower part of the “sphere” should be in touch with the hanger’s sleeve(more on this, at the picture)

These days, I’ m living the nightmare of the loyal hanger: Many ideas to try,and generally a desire to hang, but not private space-At all. So, yesterday an idea came to my mind about the widening thing but again,I couldn’t try it. So, I did the most I could do and this was trying it in the toilet room (for a short amount of time and with only a handpull ) .For these limited circumstances this experiment brought good results but at this time I can’t say if it could succeed in more advanced circumstances.
So, please check the drawing that analyzes it(funnel wrapping).

Possibly this isn’t not the Proper Wrapping but I would be happy if it will give at least an inspirational idea to someone of you and make a step, closer to the Proper Wrapping.

Really nice the idea with the spring,awstev. Maybe we could try use a a foamy material with springy attributes(like the interior of some sofa’s pillows) instead. But keep in mind that and in this case, the widening will be as much as the wrapping will permit.

My favorite cap is the cap from Monkeybar’s vacads. It does have a fairly flat bottom.

Even with a flat bottom, if there is only a bit of air in the cap, once the weight is applied, the glans will move back a bit allowing the glans to become rounded. I think a tight fitting cap, and stiff sleeves may help to minimize that.

I like this description :) Yes, my taped glans can look like a bullet, and that is not good for comfort!

Your drawings are great! I will buy some more supplies and experiment with these ideas over the next few days.

Thanks!

Great awstev!

I ‘ll be wait for your experiments and outcomes with a lot of interest!
When the circumstances of my environment permit it, I ‘ll glad to be a guinea pig of these experiments ,too. :)

Panas that’s near enough how I do it, maybe not so ball like though. Though I don’t let the lower part of the sphere as you said touch the sleeve, I find the hanger just pulls the whole wrap off that way. I suppose the wrap will be slightly different for everyone, taking into consideration of peoples head and shaft size. For instance I really have to widen my glans with tape because my heads not that big but my shaft is. Some people with a big mushroom head might not need to widen the head that much.

How come you have no private time if you don’t me asking? Parents, flat mates, girlfriend? I’m in a lucky situation I suppose, my girlfriend knows and we can sit and watch movies and stuff while I hang :)

Hehehe!
Great for you kimc! This is how the understanding is defined! :)

Unfortunately,the reason is not a Girlfriend. I host a friend with financial problems that moved from his flat
Sadly this guy doesn’t have the trust qualities that are needing in order to tell him about my pe activities.
There is the possibility that he move on soon to his parent house!I pray about it!

Kimc,about the “narrow lower wrapping be in touch with the sleeve” I think that it worth to experiment a little bit with it,as it seems an important factor. Perhaps you could put your glans a little bit away from the sleeve firstly and then,with the small movement due to the weight the wrapped glans could be able to touch the sleeve effectively.
To understand better why it’s important for the narrow bottom of the wrapping to be in touch with the sleeve think about this extreme example
: We have three hangers with the same vacuum pressure(let’s assume we have use a pump-gauge to be sure about the same pressures)

The first hanger has closed it’s opening and it has a small ball inside that is moving freely.The reason that it moves freely and don’t try to go to the roof of the hanger(like glans do when hanging) is because everywhere around it there is pressure so everywhere around it there are forces that are cancelling each other.And no Force, no willingness to move at a direction

In the second hanger imagine that we have the same ball in the air(of hanger), but tied from a thin string that goes out the hanger through a very thin sleeve at the hanger’s opening(like our shaft does). In this example it is quite obvious that there will be a pulling (against the opening) but very little.This happens because here, everywhere around the ball there is pressure except of the point that the string exist.so here ,there isn’t a force to cancel the one,that is exerted on the opposite point of the ball.

In the third hanger we have the same ball ,tied from the same string but now ,with it’s half side on the air(of hanger) and the other covered by the sleeve.You can imagine that here there will be a much stronger pulling than before.This is happen because there are only forces exported on the exposed side of the ball and not forces at sleeve’s side to cancel them.

To have conclusions about our case, think that the the ball is the wrapped glans and the lower narrow segment of the wrapping is the string.

So we have :no pulling,little pulling, and big pulling with just the same vacuum pressure but with different arrangement .

In the vacuum hanging we try to have big pulling (in order to be able to hang big weights) ,with smallest vacuum pressure possible (in order to eliminate side effects). So this is why I proposed this.

Does anybody else have problems with residual glue from using tape on the glans? If so, how do you remove it? Soap and water just doesn’t cut it.

Plein-Lee,
You shouldn’ t use this kind of tape on naked glans !
The tapes that leave residual glue are usually very adhesive(fabric tapes etc) so,except of the mess they leave behind,
They can hurt very badly (and leave you glans irritated for a long time) when you unglue them.
You should try the 3M micropore tape .No hurt and no residual glue at all.

The truth is that the first time, I tried the tape wrapping, I got screwed like you(fabric tape.)
A little bit of olive oil putted on my messy glans,and left overnight,did the trick for me. Hope this help.

Plein-Lee ,now that I checked your thread ,I show that I probably misjudged you. It seems that you already use a proper tape.
But have you tried to put a little bit of baby powder on your glans before wrapping?
This is what I do ,and maybe this why I haven’t noticed any bothersome glue residuals after unwrapping.

By the way,Great Gains!

My god you write big posts but very interesting posts :)

I see what your saying, I think ill write allot of this stuff down and on my next free day experiment with wrapping and see how it’s goes for there.