Heat = Quickest way to pack a tube.

I did an experiment.

Monday I pumped without heat and only got to just under 7 3/4” in the tube after 40 minutes.

Today I got to 7 7/8” with heat in a half hour.

An extra 1/8” may not seem like much, but it shows that the heat allows the tissue to expand, which over time means more dick!

Nice to see a direct comparison a-unit, I will pump with heat when my cylinder turns up.
Does anyone know if heat will negatively affect lucite over time?

My tube is Pyrex so a minor heating has no effect on it.

@A-unit, That is very interesting. Where do you get a Pyrex tube?

</Cleartext>

I did an experiment.

Monday I pumped without heat and only got to just under 7 3/4” in the tube after 40 minutes.

Today I got to 7 7/8” with heat in a half hour.

An extra 1/8” may not seem like much, but it shows that the heat allows the tissue to expand, which over time means more dick!

I have found that I can pack a tube in about half the time when I use heat. I preheat my tube by wrapping it with an electric heating pad and secure it with 2 rubber bands. Once it is hot I plug my member in. If it is too hot, let it cool a bit. I leave the heating pad on “high” for the entire pumping session. If feels nice and warm. I sometimes wrap a towel around everything for insulation. I can pump for extended time without my unit turning dark as it does without heat. It keeps a healthy bright pink color. This keeps the ligs and tunica warm so the vacuum can stretch things better. What say ye to this, lads?

I also pack the first inches of my tubes. I’m sorry to say that in my case,
Much of that “Packing” is scrotum skin..

Ahund

I haven’t posted in a while but I thought Id add to some experience with heat and packing a cylinder. My unit is very elliptical shaped, almost as if there’s no development in the CS at all. I use a 1.75 x 9” cylinder as my dick is 7 1/4 BPEL x 4 1/2 EG. When I first began pumping very little happened, I wasn’t using heat and it only expanded a little, it looked lost in that cylinder. The sides (CC’s) of my dick would just start to touch the inner wall of the tube by the end of the session but there was a big space at the bottom (CS), and that wouldn’t expand and the whole unit would drop back to normal immediately upon exiting the tube like a elastic band. I would bring it up to 5 or 6 hg and leave it there for upwards of an hour. The only thing I really noticed were red spots which is not great.

I read about water pumping and realised the pump I got from harbor Freight has the reservoir for liquid, so I hooked it up. I filled the tube up 1/2 way with very warm/hot water and slid into the tube, pressed it tight against my skin and layed back on my bed, pumped it upto 5 hg and watched closely. First of all, the water in the cylinder acts as a magnifying glass so you immediately appear larger, so don’t get too crazy about that lol. Anyway, I noticed much better expansion right away and within a half hour the sides (CC) were pressed firmly against the inner walls of the cylinder. I feel at this point the stress was transferred to the path of lease resistance, the CS. For the first time I watched the CS expand and my dick was actually almost cylinder shaped and close to filling the tube by the 1 hr mark. The glands blew up like crazy and 1/3 of the height of them, from bottom up was sealed tight against the wall of the cylinder. I think this is a good example why the mushroom head cylinder is a nice option as I think I was limiting my glands expansion. Unfortunately the water had all but lost its heat and its effectiveness. Water pumping caused me no discoloration, or blisters, or red spots. I’ve have been very inconsistent and not till this last month have been back at it every 3rd day.

Now I’ve tried something new and its showing me better in tube and out of tube results. Here it is..

I stretch for 5 min before entering the tube, I add hot water to the tube the same as above, I sometimes go in hard, sometimes soft, just depends what mood and stress level I’ve had that day. Once in I immediately wrap a heating pad set to high around the tube to retain the heat. I start at 5hg, but to be honest.. The real stretch doesn’t happen for me till 6 or 7 hg. I don’t feel any pain or stress, I may have a stubborn dick that just plain ol doesn’t respond to the lower vacuum pressures like some do.

Anyway.. I keep I at 5 hg for 30 min, at this point I’m almost completely stuffing the inner diameter of the tube and the CS are pumped, then pump it to 6 hg for 15 min, then 7 hg for the last 15 min. All this time keeping the heat in the tube/water to aid in expansion. Now, there is fluid build up in the foreskin and last night I got stuck in the tube.again. Lol Tricky getting that fella out, so I may try condom pumping to keep the fluid down. When I exit the cylinder it looks like a dick hat belongs to someone else. Its thick and heavy which is not like me.. So this is pretty exciting.

Bottom line is, with the hot water pumping I’m getting a full inch of girth expansion in the tube, and have been upto 7.5” BPEL. I’m not sure if I should try it every other day or not, and as I’ve been hit or mis on my routine, I haven’t seen any permanent gains, but there’s absolutely no doubt in my mind that hot water pumping, at least for me, was multiple times more effective then regular dry pumping in terms of expansion.