LeLuv Automatic penis pump. Initial review

I know is says to use water based lube but would using coconut oil damage the automatic pump?

Hey guys, I’m thinking about getting one of these. What size would you recommend for someone with my stats? Is the one with the insert worth getting? Thanks in advance for the advice. :)

(By insert I mean the magic sleeve)

This is the one I’m talking about right here that I’m considering: Smart LCD iPump Penis Pump Kit | 8 or 9 Inch Cylinder + Magic Sleeve™

I got the pump and cylinder that comes with the adapter (iPump Smart LCD Head with Adapter Penis Pump) so that the pump can be used with any cylinder. It does not look like the adapter is sold separately.
I know nothing about the insert sleeve.
There’s plenty of cylinder sizing info on the forum. It depends on your goals.
You didn’t ask, but Kodi/Leluv also complicates the decision with the wide flange and regular base so I’ll throw my experience in for reference. I have the wide in 1.75" and regular in 2". Both are fine. However, the larger the diameter the more I would go for the regular flange because the larger base encroaches on nut territory. I don’t know that I would have enough sack to accommodate a wide flange 2" cylinder. The wide flange specific seal is also harder to squeeze through. The wide flange damages easily. Though I have not dropped my regular one, the wide one fell twice about two feet onto a hard but carpeted floor which broke big chunks off the flange both times (cyanoacrylate works well to repair with baking soda to reinforce the outer/upper side). I like the regular flange better over all. Also, their TPR seals feel the best, but they don’t seal quite as well and they have a seam that tears easily so I don’t bother with them now.

Update: The nipple on the iPump Smart LCD adapter came off. I let the pump dangle by the hose to adjust something and it just fell off. Nothing rough. The nipple has very little material holding it on. I had no hose barbs on hand so I just used cyanoacrylate to reattach it followed by the same plus baking soda to reinforce (nota bene: the off-gassing is pretty bad). It’s working for now. I will get a hose barb next time I am at the hardware store to have on hand for a possibly better repair with epoxy.

The charging port broke months ago and the pump has been feeling grindy at times for the last month or so. The pump inside looks like one of the cheap mini pumps on fleabay. If I feel like digging out the special screw drivers again, I will open the iPump and collect info on the pump to get a spare. It seems that the control portion is the only part of this device that makes it special. Too bad there is not an affordable vacuum pump controller available.

I did not want to go the DIY route, but the iPump’s weaknesses are driving me to it.

Interesting, I also broke the USB charger port. I’m wondering if anyone has purchased the sleve?

Broke the USB port AGAIN last night. Does anyone have a photo of the special screwdriver used to open it?

SB

Has anyone taken a look at this one?

https://www.ama … /dp/B0BQRX7G25/

It appears to be a lesser profile that is less likely to break. Would love any opinions.

Thanks!

Omg guys, so I got the LeLuv Smart LCD iPump with the 9 Inch Cylinder + Magic Sleeve. So I got it yesterday and opened it up, assembled it, put the sleeve over the end of it and it has this little tiny hole. Apparently it comes stock with the large butt sleeve (their largest sleeve) and even this hole was tiny and the hole on the inside of the sleeve looked REALLY tight. I thought to myself, "How the F is my dick supposed to fit in there?!" So after some experimentation and familiarization with the pump settings, I lubed myself up, turned it on, put my glans up to the hole and let it suck my dick in there. The hole is VERY tight, too tight actually, and doesn’t even really let me insert all of my base as is the case with the Fleshlight cause it’s just this super tight little hole. I was excited about their sleeve pumping concept, but it seems rather flawed and gimmicky. IMHO it’s too constricting, especially at the base. I’ve been back and forth with LeLuv customer service. They’ve been very responsive, and offered to give me one of those black sleeve end caps for the stock 2.4" sleeve cylinder. I asked them if they had any larger sleeves or if the vagina one’s hole was wider and they said that that was the biggest one they had and the vagina one isn’t any wider at the base. So I said I’ll just buy one of their smaller cylinders and was trying to decide between their 5.90 inch (15 cm) = 2.125 inch (5.4 cm) and 6.25 inch (16 cm) = 2.25 inch (5.7 cm) cylinders. They recommended the 2.125" as I told them I’m aiming primarily for length gains. They said, "The magic sleeve is more geared towards masturbation. You would have to purchase the new cylinder and the adapter but we are willing to send you a sleeve for your current kit. If you are focusing on length you will need a slightly smaller cylinder so that the penis can touch the sides of the cylinder causing the penis to stretch. The 2.125 will most likely be the best option but you may grow out of it faster with this focus exercise. The 2.4 cylinder that came with the kit will allow you to work on both length and girth with the sleeve which we can send out today.

Acrylic cylinders
9 Inch or 12 Inch Replacement Cylinder with Fitting for Penis Pumps

Adapter
Adapter | iPump Vacuum Pump Head Units -to- 1/4" Hose Quick-Disconnect

We thank you for your communication and an opportunity to make this right for you.

If we can be of any further assistance, please let us know.
We do appreciate your business. Thanks again and have a great day!

Customer Service,
LeLuv - Save more Luv more!

So a bit of a disappointment regarding the sleeve cylinders. I thought they seemed rather gimmicky but gave them a shot. I have used the CTC DP-4000 pump in the past with standard cylinders but thought this sleeve version seemed superior to combat edema from what I read on the forums. So now I’m looking at having to buy the adapter and a 2.125" cylinder and pumping the old fashioned way, albeit a little easier as it’s one unit now instead of a cylinder with a hose attached to a pump. Good thing is those cylinders are reasonably priced as is the adapter so it’s not that big of a loss. Just thought I’d share my experiences with them so far to help the community out.

Gave the pump a second chance tonight and it is loosening up a bit, although it’s still very tight. I did several smaller experimental sessions followed by one approximately 10 minute session at about 10 hg in one minute cycles. My dick expanded and got really girthy and pressed the sleeve up against the cylinder walls to the point that the sleeve was compressed down to about 1/3 of an inch up against the cylinder walls. I have to use LOTS of lube. Length maxed out to around 8 1/8-1/4 inches BPEL at the end of it! This counterpressure allows higher pressures more comfortably and prevents things like edema, blisters, and red spots.

I’m honestly not a fan of the electric pump. It falls over all the time plus you can control the speed it climbs up in pressure.

I much prefer a manual

It did fall over for me too, which is why I propped it up with a pillow and wrapped a towel around it. Do you mean you can’t control the speed? The only time it climbed up in pressure for me was when I started stroking the tube or pulled it away from me.

Tried it a third time and it’s just too damn tight, especially around the base. Chokes my dick and applies too much counter pressure. Ordered that 2.125" diameter cylinder and am going to roll old fashioned style with it, pack the tube, and ditch the sleeve.

My pump and sleeve arrived today. Yes I purchased another one because I like it too much to be without it. Will let you know how I go re tightness. On the plus side I’ve been clampingwhile awaiting for the pump to arrive,

I’m about 5 and 1/4 girth and about 6 at the base.

SB