Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Selecting Your Cylinder Size

◀ 1 585960616263646566 109 ▶

Originally Posted by gprent

I hate to go counter to the previous advice, but I really think you will be wasting money buying a 1.75” cylinder. The experience you describe using your 2.0” tells me that cylinder is the perfect size for you.

I agree with gprent.

firegoat is fully RETIRED from Thundersplace.

All injuries happen from "too much", or "too much, too soon" or "doing the exercise incorrectly".

Heat makes the difference between gaining quickly or slowly for some guys, or between gaining slowly instead of not at all for others. The ideal penis size is 7.6" BPEL x 5.6" Mid Girth. Basics.... firegoat roll How to use the Search button for best results

Thank you. I appreciate all the help

Does anyone else have a cylinder from LeLuv? They seem to have an internal lip on the bottom of the tube, which has a smaller internal diameter than the tube itself…

Originally Posted by gprent

I hate to go counter to the previous advice, but I really think you will be wasting money buying a 1.75” cylinder. The experience you describe using your 2.0” tells me that cylinder is the perfect size for you.

I was actually snooping at ThickWall moments ago, and that site encourages customers to buy a cylinder that’s rounded to their nearest girth. (As I understand, 4.5” would get a 1.5 cylinder)

But in terms of focusing on girth, it’s better to get a 1.75, then? (Or 1 3/4 inch, going by the store)

Originally Posted by DarkEngine
I was actually snooping at ThickWall moments ago, and that site encourages customers to buy a cylinder that’s rounded to their nearest girth. (As I understand, 4.5” would get a 1.5 cylinder)
But in terms of focusing on girth, it’s better to get a 1.75, then? (Or 1 3/4 inch, going by the store)

Definitely get the 1.75, or if you prefer get the 1 3/4. ;)

The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.

Thanks.

Tried the pump out. The skin of the base also gets pumped and engorged, not just the penis. Is this alright?

Originally Posted by DarkEngine
Thanks.
Tried the pump out. The skin of the base also gets pumped and engorged, not just the penis. Is this alright?

Yes, that’s OK.

The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.

I’ve been trying to pack my 1.75 tube but its being hard as I don’t have enough girth and seems like my MS does not expand. I’ve been trying to pump for over 1 hour at 6hg and heat, but so far I can only pack the first 30% of the tube.

The biggest problem is that most of this packed part is the skin at the base and the sack that is being pulled into the tube and is helping me pack it. What do you guys think?

Start 30/06/2016 - BPEL 13cm MSEG 11,50cm

Now - BPEL 16,20cm MSEG 12,00cm BPFSL 18,00cm BPELIT 18,00cm Clamped BPEL 17,50cm

DREAM! 19cm BPEL 17cm NBPEL 14cm MSEG

Originally Posted by Dvdck
I’ve been trying to pack my 1.75 tube but its being hard as I don’t have enough girth and seems like my MS does not expand. I’ve been trying to pump for over 1 hour at 6hg and heat, but so far I can only pack the first 30% of the tube.

The biggest problem is that most of this packed part is the skin at the base and the sack that is being pulled into the tube and is helping me pack it. What do you guys think?

Are you in pumping for how long?

Try a cock ring in your balls. Drink more water while pumping. Try to shake the tube and milking.

Or a break of 30 days without pump.

Originally Posted by Pumpbra
Are you in pumping for how long?

Try a cock ring in your balls. Drink more water while pumping. Try to shake the tube and milking.

Or a break of 30 days without pump.

E aí blz?

So my tots pumping experience is about 6 months. Usually in my routine I pump for 1 hour.

Sometimes I try to pump for 2+hours to see if I can pack more of the tube.

Just took a 20 days break in January.

But my biggest question is how long does it take when you pack one tube and you go one size lager, usually how long does it take to pack this next tube?

Start 30/06/2016 - BPEL 13cm MSEG 11,50cm

Now - BPEL 16,20cm MSEG 12,00cm BPFSL 18,00cm BPELIT 18,00cm Clamped BPEL 17,50cm

DREAM! 19cm BPEL 17cm NBPEL 14cm MSEG

Originally Posted by Dvdck
E aí blz?

So my tots pumping experience is about 6 months. Usually in my routine I pump for 1 hour.

Sometimes I try to pump for 2+hours to see if I can pack more of the tube.

Just took a 20 days break in January.

But my biggest question is how long does it take when you pack one tube and you go one size lager, usually how long does it take to pack this next tube?

Blz e vc? eheh

If you got real gains from the other one, than it should take the same time for the new one.

After you pack, you need to keep packing for 30~45days than you move to a big one from my experience.

Maybe you are overdoing it. 1hr for only 6 months of pump.. that’s not good.

1 hr is for people with 10 months+ of pump.

Well I have been looking into the leluv set up but they are out of the 1.75 cylinders for up to 45 days in the 9 inch.

I am looking to use it for a water pump so would a 2 inch work or do you want the same for air and water. I could buy the 12 inch tube in 1.75 and do both.

I assume the diameter is more important than the length.

Originally Posted by Captain Morgan
Well I have been looking into the leluv set up but they are out of the 1.75 cylinders for up to 45 days in the 9 inch.
I am looking to use it for a water pump so would a 2 inch work or do you want the same for air and water. I could buy the 12 inch tube in 1.75 and do both.
I assume the diameter is more important than the length.

Actually, for water pumping, after having enough water in the tube to cover your cock, it is good to then have a large enough air pocket so water doesn’t get sucked into your pump. So the 1.75X12 or even a 2.0X12 would be a good idea.

Here are some pics of a full package water set up and the 3rd pic in the 1st post clearly shows the air pocket necessary to prevent water from getting sucked into your pump. Full Package STJ Pumping Pics

The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.

Last edited by gprent : 02-25-2017 at .

Originally Posted by Pumpbra
Blz e vc? eheh

If you got real gains from the other one, than it should take the same time for the new one.

After you pack, you need to keep packing for 30~45days than you move to a big one from my experience.

Maybe you are overdoing it. 1hr for only 6 months of pump.. that’s not good.

1 hr is for people with 10 months+ of pump.

Actually I was pumping for up to 2 hours with pressures from 5 to 15hg, constantly changing pressure.

After my last break I’ve been doing 1 hour average with up to 7hg and trying to avoid the temptation of increasing pressure kkk

Start 30/06/2016 - BPEL 13cm MSEG 11,50cm

Now - BPEL 16,20cm MSEG 12,00cm BPFSL 18,00cm BPELIT 18,00cm Clamped BPEL 17,50cm

DREAM! 19cm BPEL 17cm NBPEL 14cm MSEG

Originally Posted by gprent
Actually, for water pumping, after having enough water in the tube to cover your cock, it is good to then have a large enough air pocket so water doesn’t get sucked into your pump. So the 1.75X12 or even a 2.0X12 would be a good idea.

Here are some pics of a full package water set up and the 3rd pic in the 1st post clearly shows the air pocket necessary to prevent water from getting sucked into your pump. Full Package STJ Pumping Pics

Thanks for the info , that makes a lot of sense.
Your homemade cylinder was impressive.

Top
◀ 1 585960616263646566 109 ▶

All times are GMT. The time now is 11:19 PM.