Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Selecting Your Cylinder Size

Hey can you help me? I think its the first time I write here (I read a lot through years), but now I bought some tubes because I have read this guide and I wanted to give it a try.
My goal is girth 100% and my Base Girth is 4.50 inches.

By this table
3.50 to 4.50* -> 1.50” tube
4.75 to 5.25* -> 1.75” tube

I am supposed to get the 1.75” tube, that is the one I bought, but I already fill the tube completely, resulting in my penis gaining length instead of girth!
Am I understanding anything the bad way?
How am I supposed to grow up to 5.25” if I already fill the tube with my girth?
These maths don’t work for me.

Originally Posted by Bahamut2
Hey can you help me? I think its the first time I write here (I read a lot through years), but now I bought some tubes because I have read this guide and I wanted to give it a try.
My goal is girth 100% and my Base Girth is 4.50 inches.

By this table
3.50 to 4.50* -> 1.50” tube
4.75 to 5.25* -> 1.75” tube

I am supposed to get the 1.75” tube, that is the one I bought, but I already fill the tube completely, resulting in my penis gaining length instead of girth!
Am I understanding anything the bad way?
How am I supposed to grow up to 5.25” if I already fill the tube with my girth?
These maths don’t work for me.

It is still just a guide. If you fill the tube now, from base to top, then simply move up to the next size.

Are you seeing temporary girth expansion at all with the 1.75” at all?


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

Originally Posted by Bahamut2
Hey can you help me? I think its the first time I write here (I read a lot through years), but now I bought some tubes because I have read this guide and I wanted to give it a try.
My goal is girth 100% and my Base Girth is 4.50 inches.

By this table
3.50 to 4.50* -> 1.50” tube
4.75 to 5.25* -> 1.75” tube

I am supposed to get the 1.75” tube, that is the one I bought, but I already fill the tube completely, resulting in my penis gaining length instead of girth!
Am I understanding anything the bad way?
How am I supposed to grow up to 5.25” if I already fill the tube with my girth?
These maths don’t work for me.

You mean the very first time you pumped with your 1.75” tube you packed it completely? If so, that is very unusual as that tube with your girth should give you plenty of room to expand.

Please give more details on how long you have been using that tube and how long do you pump for and at what pressure in order to completely pack the tube?

If you measure your girth immediately after pumping and exiting the tube, your girth should measure on the order of 5.25” or larger. Is that true?


The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.

Also, what is your soft girth and your hard girth? Maybe you used your soft measurement when you ordered the tube?


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

Originally Posted by thoughtfulgold
Also, what is your soft girth and your hard girth? Maybe you used your soft measurement when you ordered the tube?

That is an excellent point. The chart is made based on erect girth measurements.


The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.

Damn, I was measuring flacid . I will remeasure now.

What girth is the glans? And your midshaft?


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

So my girth now is arround 5.5” (deppends on the erection level) that means I have to switch to a new cylinder, now I understand why this does not work for me, I’m silly for not reading all the text.
Now I have a useless tube lol and I have to buy a new one.

Thoughtfulgold,
The midshaft is a bit more thick than the base, I never understood why but I think its because I use those silicone sleeves and the base of the penis never goes inside at 100% so my glan is also bigger when I pump, like 1” bigger.
But after 1-2 days it returns to normal size. Why do you ask this?
Maybe I should stop using those sleeves.
I think the base is arround 5.5”, midshat 5.75” and glans 6.5” (this is afterpump)

I ask because if your mid shaft is thicker than the base it can cause sealing issues. We were trying to make sure you had the right size tube. But it sounds like you’ve figured it out.

Try pumping without the sleeve and see if your base inflates more during pumping.


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

Thanks thoughtfulgold, the base now inflates without the sleeve, I had to trim all my hair, I thought the tube was broken somehow, but the real problem is that I had too much hair.

Now it perfectly seals and I hope to get the base thicker.

Originally Posted by Bahamut2
Thanks thoughtfulgold, the base now inflates without the sleeve, I had to trim all my hair, I thought the tube was broken somehow, but the real problem is that I had too much hair.
Now it perfectly seals and I hope to get the base thicker.

That is excellent, man. Good luck and good gains to you. I’m sure the base will get thicker soon, pumping always helps with that. Especially at the beginning.


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

Hi everyone,

Is there a company that offers the cylinders in stages of 1/8 instead of 1/4?

Reason being, I just can’t fit into my 2.00 anymore and feel there’s a little too much room to impact length in the 2.25. I’d be willing to pay more often by moving in smaller increments. If I could pack the 2 1/8 It would probably take less than 5Hg/in stay above my BPEL. Any ideas or thoughts are always welcome.

Thank you.

Steel

Originally Posted by steelcablecock
Hi everyone,
Is there a company that offers the cylinders in stages of 1/8 instead of 1/4?
Reason being, I just can’t fit into my 2.00 anymore and feel there’s a little too much room to impact length in the 2.25. I’d be willing to pay more often by moving in smaller increments. If I could pack the 2 1/8 It would probably take less than 5Hg/in stay above my BPEL. Any ideas or thoughts are always welcome.
Thank you.
Steel

CTC company does it by 1/4 BUT they only offer the odd sizes. Meaning they start at # and 1/8 to # and 3/8 and so on, so forth. Penis Chambers, penis enlargement products So that tube you get may very well offer a good compromise between 2 and 2.25" cuz they do in fact have a 2 and 1/8" option available.


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

Originally Posted by thoughtfulgold
CTC company does it by 1/4 BUT they only offer the odd sizes. Meaning they start at # and 1/8 to # and 3/8 and so on, so forth. Penis Chambers, penis enlargement products So that tube you get may very well offer a good compromise between 2 and 2.25" because they do in fact have a 2 and 1/8" option available.

Thank you thoughtful! I ordered it.

The same size tube from different vendors are not necessarily the same actual size. I theorize some conflicting experiences sizing tubes are caused by this. The shape of the tube and your dick also play into this I think.

We could all get out calipers and bore gauges and take measurements of all our tubes and our dicks at every inch and compare notes I guess. *Laughing in fear it may happen* Find a tube that fits, one you can pack more than a little. Maybe one a little larger too, if you want to stage up to it. I find this to slightly degrade EQ and PI’s though, but good for giving your girl a fun night. New guys 2 cents.

Top

All times are GMT. The time now is 07:29 AM.