Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

How can I make a hanger

How can I make a hanger

Is there any way to make a hanger at home?

Honestly, I’m not sure you’re quite ready to start hanging yet. If you’ve done any reading of the Hanger’s Forum here at Thunder’s, you should have seen the very first thread at the top of the page: Homemade Hanger Models and Instructions

Read, read, read. Then build. Good luck, and welcome to the forum. :)

Don’t hang it yet, better conditioning your dick first, or you will seriously raise the possibility to hurt yourself.

The newbie routine first, hanger 2nd.


Gone cementing - Started (2005): 7.25 NBPEL 5.7 EGMS. 5 years later (2010): 8.25 NBPEL 6.3 EGMS. 8 years later, 3 years with no PE (2013): 8.1 NBPEL 5.9 EGMS

Thebig1,

There is a easy way to get a hanger. Do you live near a pet store? If you do, you can buy a mussle for about $11.00 and use it as a hanger. This is what I use for hanging. They come in different sizes 0,1,2,3, and on up. What is your flaccid girth? You would have to take it out of the package to see if the mussle is the size that would fit over you penis.

You have time before you start hanging, you are still a Newbie and you should still be doing the Newbie routine.

P1010011.webp
(29.7 KB, 122 views)

Starting Stats 7/15/05 -- Flaccid L 3.375"x Flaccid G 2.125", BPEL 5.250" x EG 3.750"

Stats as of 11/17/07-- Flaccid L 6.000"x Flaccid G 5.6875", BPEL 8.000" x EG 6.125"

Long Term Goal: BPEL 9.000"x EG 6.500" Dusty


Last edited by cclark369 : 02-14-2006 at .

Originally Posted by cclark369
Thebig1,

There is a easy way to get a hanger. Do you live near a pet store? If you do, you can buy a mussle for about $11.00 and use it as a hanger. This is what I use for hanging

:rolling:

Thought this was a joke post, the guy bought a "mussle" from a pet store and is using it for hanging.


Running a Massive Co-Front.

Originally Posted by iamaru
:rolling:

Thought this was a joke post, the guy bought a "mussle" from a pet store and is using it for hanging.

All I know that it works in the way I want it to. I have gone through two other ones and on my third one. Try it, you might like it.


Starting Stats 7/15/05 -- Flaccid L 3.375"x Flaccid G 2.125", BPEL 5.250" x EG 3.750"

Stats as of 11/17/07-- Flaccid L 6.000"x Flaccid G 5.6875", BPEL 8.000" x EG 6.125"

Long Term Goal: BPEL 9.000"x EG 6.500" Dusty

I can see where using a muzzle like the one in the picture might work.

A mussel is close cousin to the clam and oyster. So I thought this guy was going to the pet store and buying clams to clamp on to his unit.


Running a Massive Co-Front.

How do you put your dick in it? From the front or the back?

Originally Posted by cclark369
Thebig1,

There is a easy way to get a hanger. Do you live near a pet store? If you do, you can buy a mussle for about $11.00 and use it as a hanger. This is what I use for hanging. They come in different sizes 0,1,2,3, and on up. What is your flaccid girth? You would have to take it out of the package to see if the mussle is the size that would fit over you penis.

You have time before you start hanging, you are still a Newbie and you should still be doing the Newbie routine.

Watch out for the mutt if you decide to share. Walkies might get interesting.


June 06 BPEL = 6.875 E/G = 5.500

hanger

Originally Posted by ssghokie
How do you put your dick in it? From the front or the back?

Hey SSG Hokie

The mussle that I use goes on with the small end down to the base of the penis. After it on all the way you wrap the penis shaft, then you pull the mussel over the wraping. After you do this you put on a clamp to stop it from sliding. The next thing you have to get a S hook to put on the strap.

Welcome to Thunders Place


Starting Stats 7/15/05 -- Flaccid L 3.375"x Flaccid G 2.125", BPEL 5.250" x EG 3.750"

Stats as of 11/17/07-- Flaccid L 6.000"x Flaccid G 5.6875", BPEL 8.000" x EG 6.125"

Long Term Goal: BPEL 9.000"x EG 6.500" Dusty

Originally Posted by cclark369
Hey SSG Hokie

The mussle that I use goes on with the small end down to the base of the penis. After it on all the way you wrap the penis shaft, then you pull the mussle over the wraping. After you do this you put on a clamp to stop it from sliding. The next thing you have to get a S hook to put on the strap.

Welcome to Thunders Place

This is what my set up looks like.

P1010016.webp
(25.0 KB, 76 views)

Starting Stats 7/15/05 -- Flaccid L 3.375"x Flaccid G 2.125", BPEL 5.250" x EG 3.750"

Stats as of 11/17/07-- Flaccid L 6.000"x Flaccid G 5.6875", BPEL 8.000" x EG 6.125"

Long Term Goal: BPEL 9.000"x EG 6.500" Dusty

Originally Posted by cclark369
Hey SSG Hokie

The mussle that I use goes on with the small end down to the base of the penis. After it on all the way you wrap the penis shaft, then you pull the mussel over the wraping. After you do this you put on a clamp to stop it from sliding. The next thing you have to get a S hook to put on the strap.

Welcome to Thunders Place

I guess I have been spelling it wrong (MUZZLE) sorry for the mix up


Starting Stats 7/15/05 -- Flaccid L 3.375"x Flaccid G 2.125", BPEL 5.250" x EG 3.750"

Stats as of 11/17/07-- Flaccid L 6.000"x Flaccid G 5.6875", BPEL 8.000" x EG 6.125"

Long Term Goal: BPEL 9.000"x EG 6.500" Dusty

Here are a few larger images of dog muzzles:
http://www.dog. com/itemdy00.as … 320706+000&Cat=

Of course, even though I haven’t been hanging recently, I’ll probably go buy a muzzle tomorrow and give it a test tug.

CClark, are you using a Cable Clamp for the clamp?

It looks like it would be important to make sure the cylinder part of the muzzle is as complete as possible. Some appear to have just a thin strap going around the lower jaw.

They come in leather for all you fetishists:

Originally Posted by Ike
Here are a few larger images of dog muzzles:
http://www.dog. com/itemdy00.as … 320706+000&Cat=

Of course, even though I haven’t been hanging recently, I’ll probably go buy a muzzle tomorrow and give it a test tug.

CClark, are you using a Cable Clamp for the clamp?

It looks like it would be important to make sure the cylinder part of the muzzle is as complete as possible. Some appear to have just a thin strap going around the lower jaw.

They come in leather for all you fetishists:


Hi,
Yes I am using a Hose clamp or metal key clamp, the small opening goes on over the penis and shaft, slide it all the way to the base. Take a cloth wrap put it on the shaft of the penis, then slide the muzzle over the wrap, then put another wrap over the muzzle and use your clamp


Starting Stats 7/15/05 -- Flaccid L 3.375"x Flaccid G 2.125", BPEL 5.250" x EG 3.750"

Stats as of 11/17/07-- Flaccid L 6.000"x Flaccid G 5.6875", BPEL 8.000" x EG 6.125"

Long Term Goal: BPEL 9.000"x EG 6.500" Dusty

What size would you recommend for 5” girth?

Top
Similar Threads 
ThreadStarterForumRepliesLast Post
The AFB HangerPietPenis Hangers8908-03-2021 12:31 PM
Bib Hanger question?pyrsnwbPenis Hangers908-22-2005 11:01 PM
No wrapping needed with the CCH3 hanger?chickenchokerPenis Hangers102-26-2004 02:08 AM
Questions to make my own hanger?FrenchyPenis Hangers804-08-2003 06:57 PM

All times are GMT. The time now is 05:28 AM.