It was actually on my very first set clamping.
UM1991
CLAMPING Everything You Ever Wanted To Know
Monty:
Originally Posted by UM1991
How do I know when I achieved expansion? Will I achieve any expansion at all with sets of around 2-5 minutes? I go into the clamp at 70-80% erection and subside to maybe 60% and lightly stroke it to maintain a little above that. At around 60% erection level outside of the clamp, my MSEG is 4.75. So I would imagine if in the clamp im 5” I have achieved expansion. But if I’m wrong can someone clarify that for me?
I’m a little confused about your numbers. The procedure should be: bring yourself to about 70 or 80% erect and then set your clamp. That should give you at least 100% erection (rock hard). It is possible to exceed 100% in which case expansion will occur. At that point you remain in that condition until the time duration has expired (10 min). Release the clamp and allow your erection to collapse and in about 10 minutes repeat the process.
09-2003 BPEL:6.0x5.5
11-2004 BPEL:8.25x6.25 . . 9+ by Spring is the goal AIR CLAMP
Now BPEL:8 5/8 x 6 5/8 PE Weights
kooljohn
Originally Posted by Monty:
Yes you have achieved expansion if you’ve gained 1/4” of girth from the starting set to any set that shows growth.How many sets did it take for you to get that expansion?
You’ll find that your greatest expansion comes in the 3 or 4th set. Sometimes longer but that’s usual.
Of course with short sets like your doing you may not get the expansion that your capable of, so you might have to do more sets to get the results your looking for.
That’s good to know. I’ve got up to 0.25” expansion on 2 to 3 sets but I will try for 4 or 5 sets throughout the day to see jus how much expansion is possible.
Starting stats:- Dec11th2008 7.2"bpelx6" meg.Mar23rd09 8.375"bpel x 6.125"meg. Mar10 8.4" bpelx6.125" meg.
Goal: 8"nbpel x 7" A one eyed monster by any standard :)
UpTo7
Originally Posted by UM1991
Let me start off by saying that I JUST got into clamping. I’m 5 months into PE and am going to be doing very light clamping for a month (at most 3 2-5 minute sessions).How do I know when I achieved expansion? Will I achieve any expansion at all with sets of around 2-5 minutes? I go into the clamp at 70-80% erection and subside to maybe 60% and lightly stroke it to maintain a little above that. At around 60% erection level outside of the clamp, my MSEG is 4.75. So I would imagine if in the clamp im 5” I have achieved expansion. But if I’m wrong can someone clarify that for me?
Also, I am extremely comfortable in the clamp with about 4 teeth still left to click. Should I just leave it at that, or go one or two clicks more?
At Beever: I’m using coban tape for my wrap. You can find it at any medical supply store and a roll costs like 2 bucks. I want to says it 3/4-1 inch in thickness. I cut a two foot piece off and make an even wrap. Its very comfortable.
If you don’t want discoloration, you might want to try drilla9’s style of clamping. He gained a lof of girth in short time without discoloration, but then again, what works for him may not work for others. I’m certainly going to clamp like him once I start.
So basically, he puts on a clamp when 100% erect, clamps as tight as comfortably possible and then releases 2 clicks. That way you’re sure you’re not creating too much pressure to get discoloration easily. If I recall correctly, he ultimately got up to 4 sets of 15 minutes.
nrvous1
Just finished reading this entire thread.post for post and it only took me a week! Heh.great thread and I’m learning a lot browsing TP. Bump for a great read.
Gyrta
Which type of girth does most benefits from clamping?
Top girth,midshaft or base girt?
BPEL: 7.25"
HG: ~6.25" | MEG:6.25" | Low shaft EG:6.5" | BG: 7"
drilla9
Usually base, middle then top in that order.
Audi561
My gains have basically just come middle and upper. Mostly like an inch below the head, it’s something about my upward curve that caused this. I’m finding base gains hard through clamping.
UM1991
Audacia, have you recorded more expansion in any one particular area? Like more beneath the glans than midshaft. And more midshaft then base?
Audi561
Originally Posted by UM1991
Audacia, have you recorded more expansion in any one particular area? Like more beneath the glans than midshaft. And more midshaft then base?
My expansion is mostly in the area 1-2 inches below the glans, so there’s a bigger inch of expansion their. Then below that if I keep doing many clamping sets it gets bigger but it’s a squishy type feeling, not rock hard like above, which is caused through some sort of fluid build up. I definitely have a big baseball effect going on.
UM1991
Originally Posted by Audacia
My expansion is mostly in the area 1-2 inches below the glans, so there’s a bigger inch of expansion their. Then below that if I keep doing many clamping sets it gets bigger but it’s a squishy type feeling, not rock hard like above, which is caused through some sort of fluid build up. I definitely have a big baseball effect going on.
Could it be your wrapping technique or clamp placement do you think?
GTO2010
Ya do you use a theraband? And make sure your wrap and clamp are as close to your pubic bone as possible?
Also, actively focus you abs to keep the clamp close to the pubic bone during the clamp.
Starting: (15X11.2 cm)(EV:9.13ci) Current: (17.5 X 11.9cm)(EV:12.07ci) Future: LONG AND THICK
Short term goal: (18.1X12.2cm)(EV:13.08ci) Long term goal: 22X16 cm EV: 26.31ci
All measurements are BPEL and Average girth (top shaft erect, mid shaft erect, and base erect) Journey Began on 1-20-10 Target date: 8-30-13
UM1991
Originally Posted by GTO2010
Ya do you use a theraband? And make sure your wrap and clamp are as close to your pubic bone as possible?Also, actively focus you abs to keep the clamp close to the pubic bone during the clamp.
I haven’t been using theraband, been using about 2 feet of coban tape. I wonder if that’s enough for a wrap?
toofpick
I don’t use a wrap at all. It gets in the way.
drilla9
Originally Posted by toofpick
I don’t use a wrap at all. It gets in the way.
True dat..:D
All times are GMT. The time now is 02:30 PM.