Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

LG Hanger, a new vacuum hanger

Getting rid of edema

Originally Posted by WIbeer
I recently started to use the Lg hanger an I have the same issue. I hang for 1 hour at a time. After I hang, I wrap my penis with an ace bandage starting from behind the gland( right on the edema) and wrap downwards. Then pump for 10 mins. This helps getting rid of the edema.

There’s another thing that can be done to help eliminate the potential for edema. After your first 30 minutes of hanging, remove the chamber and wrap and do about 5 minutes of hand stretches and moderate intensity jelqs. Then re-wrap and continue your hang for the remaining 30 minutes.
Repeat the hand work after the session and then re-wrap the area and wear a girth band or section of silicon sleeve over the affected area.

IMG_2432.webp
(212.8 KB, 50 views)
IMG_2433.webp
(162.5 KB, 35 views)

[QUOTE=LGHanger]
There’s another thing that can be done to help eliminate the potential for edema. After your first 30 minutes of hanging, remove the chamber and wrap and do about 5 minutes of hand stretches and moderate intensity jelqs. Then re-wrap and continue your hang for the remaining 30 minutes.
Repeat the hand work after the session and then re-wrap the area and wear a girth band or section of silicon sleeve over the affected area.

Hi I recently moved over from a cheaper Chinese vacuum style hanger to the LG hanger and have found the same problem with Edema. I was wrapping with micropore tape before successfully. However, when trying the same method with the LG hanger, the donut affect would be really large. I’m going to try wrap the shaft with the self adhesive bandage and see if that improves anything. Maybe lowering the weight to allow more conditioning is a factor, moving from other vacuum hangers to the LG hanger. As more of the shaft is inside the chamber, would it require lowering the weight to accustom and condition the penis shaft as well?

I was thinking of starting to fulcrum hang if the edema build up continues. I can then still gain from using a low weight, as well as condition myself to the LG.

edema / donut effect

Originally Posted by PeJohnsS
[QUOTE=LGHanger]
There’s another thing that can be done to help eliminate the potential for edema. After your first 30 minutes of hanging, remove the chamber and wrap and do about 5 minutes of hand stretches and moderate intensity jelqs. Then re-wrap and continue your hang for the remaining 30 minutes.
Repeat the hand work after the session and then re-wrap the area and wear a girth band or section of silicon sleeve over the affected area.

Hi I recently moved over from a cheaper Chinese vacuum style hanger to the LG hanger and have found the same problem with Edema. I was wrapping with micropore tape before successfully. However, when trying the same method with the LG hanger, the donut affect would be really large. I’m going to try wrap the shaft with the self adhesive bandage and see if that improves anything. Maybe lowering the weight to allow more conditioning is a factor, moving from other vacuum hangers to the LG hanger. As more of the shaft is inside the chamber, would it require lowering the weight to accustom and condition the penis shaft as well?

I was thinking of starting to fulcrum hang if the edema build up continues. I can then still gain from using a low weight, as well as condition myself to the LG.

Edema can be an issue for some. You might be using too much weight too soon.
Limit your sodium intake and you might want to consider a herbal diuretic. Water retention is an individual thing.
Edema while it can be annoying will not prevent you from making gains. I always recommend a post hang wrap if you experience edema. Use Tender wrap around the effected area. You want it to be snug but not tight. Then install a Girth Band over it and within 20-30 minutes the edema will be gone.

IMG_2432.webp
(212.9 KB, 13 views)
IMG_2433.webp
(162.6 KB, 10 views)

Edema

Thanks for the suggestion! What kind of herbal diuretic would you suggest taking to improve this?

herbals

Originally Posted by PeJohnsS
Thanks for the suggestion! What kind of herbal diuretic would you suggest taking to improve this?

#1 - Hydrocin
#2 - Water Away

Those are good supplements to reduce water retention. Any thing with the following ingredients:
Dandelion, Juniper, Green Tea and Parsley.
The liquid sublingual type works better than pills.

New XXL sleeves

I just finished casting rubber into new molds I made for XXL silicon sleeves. With more and more guys opting for surgical girth procedures our XL sleeve was just a little too snug. These will soon be available for sale. For guys who’ve been blessed with 7” + girth circumference below the glans and others who’ve had successful PMMA procedures by Surgery Life Enhancement these will be your go to sleeve!

Good sleeve quality starts with a quality mold… notice how uniform the wall thickness is. These are your crappy slave labor Chinese sleeves or your “do it yourself” experiment! Best quality medical grade silicon.

XXL LGH sleeve (2).webp
(513.9 KB, 48 views)
XXL LGH sleeve.webp
(512.3 KB, 36 views)

Last edited by LGHanger : 07-29-2020 at . Reason: spelling

spelling correction

Originally Posted by LGHanger
I just finished casting rubber into new molds I made for XXL silicon sleeves. With more and more guys opting for surgical girth procedures our XL sleeve was just a little too snug. These will soon be available for sale. For guys who’ve been blessed with 7” + girth circumference below the glans and others who’ve had successful PMMA procedures by Surgery Life Enhancement these will be your go to sleeve!

Good sleeve quality starts with a quality mold… notice how uniform the wall thickness is. These are your crappy slave labor Chinese sleeves or your “do it yourself” experiment! Best quality medical grade silicon.

Aren’t instead of are….

As these XXL sleeves available on your website? I checked but could not find them this morning.

Thanks,

QUOTE=LGHanger]
I just finished casting rubber into new molds I made for XXL silicon sleeves. With more and more guys opting for surgical girth procedures our XL sleeve was just a little too snug. These will soon be available for sale. For guys who’ve been blessed with 7” + girth circumference below the glans and others who’ve had successful PMMA procedures by Surgery Life Enhancement these will be your go to sleeve!

Good sleeve quality starts with a quality mold… notice how uniform the wall thickness is. These are your crappy slave labor Chinese sleeves or your “do it yourself” experiment! Best quality medical grade silicon.
[/QUOTE]

Originally Posted by Azmike
As these XXL sleeves available on your website? I checked but could not find them this morning.

Thanks,

QUOTE=LGHanger]
I just finished casting rubber into new molds I made for XXL silicon sleeves. With more and more guys opting for surgical girth procedures our XL sleeve was just a little too snug. These will soon be available for sale. For guys who’ve been blessed with 7” + girth circumference below the glans and others who’ve had successful PMMA procedures by Surgery Life Enhancement these will be your go to sleeve!

Good sleeve quality starts with a quality mold… notice how uniform the wall thickness is. These are your crappy slave labor Chinese sleeves or your “do it yourself” experiment! Best quality medical grade silicon.


[/QUOTE]

Not for sale just yet… we’ve got to get our IT guy to help us insert them into our website & check-out menu. Hopefully within a week they will be available.

I am ready to place an order whenever available.

I have purchased your size XL several times and they are of great quality but frankly they are too tight for my girth. I buy them anyway because of the quality and just suffer a bit until they slightly stretch over time.

This XXL will be sooo much better for me.

Great News!

Quote
LGHanger

Not for sale just yet… we’ve got to get our IT guy to help us insert them into our website & check-out menu. Hopefully within a week they will be available.
[/QUOTE]

sleeve stretching

Originally Posted by Azmike
I am ready to place an order whenever available.

I have purchased your size XL several times and they are of great quality but frankly they are too tight for my girth. I buy them anyway because of the quality and just suffer a bit until they slightly stretch over time.

This XXL will be sooo much better for me.

Great News!

Not for sale just yet… we’ve got to get our IT guy to help us insert them into our website & check-out menu. Hopefully within a week they will be available.


[/QUOTE]

In the interim while we get things added to our menu, you can always improvise a little and stretch your sleeve to loosen it up. I’ve had to stretch some sleeves for a few guys. I just roll them over a much larger object and leave them for 48 hours. I use a aluminum baseball bat….

IMG_2413.webp
(188.5 KB, 42 views)

Just purchased LG Hanger and Phalosen forte.. Anyone suggest starting Routine for hanging? I figured I start at 2.5lbs 30 minutes 2 sessions per day and work up from there. I’m 6.25 BPEL my goal is 8.25 BPEL.. Can I get this in a year ? I’m hoping not to go pass 7lbs by adding more hanging time when I get there.Hopefully, PF can can contribute to some of the gains.

Originally Posted by TheManChise

Just purchased LG Hanger and Phalosen forte.. Anyone suggest starting Routine for hanging? I figured I start at 2.5lbs 30 minutes 2 sessions per day and work up from there. I’m 6.25 BPEL my goal is 8.25 BPEL.. Can I get this in a year ? I’m hoping not to go pass 7lbs by adding more hanging time when I get there.Hopefully, PF can can contribute to some of the gains.

I think it’s better if you have realistic goals from the beginning. Probably it will take years to reach 8.25 if you reach it at all. But 7 BPEL in one year is doable.


190416 Bpel 16,5 Bpfsl 16,5 Meg 14,2 Beg 15,0

210312 Bpel 19 Bpfsl 19,6 Meg 14,5 Beg 15,3

___Gain Bpel +2,5 Bpfsl +3,1 Meg +0,3 Beg +0,3

Potential gains

Originally Posted by TheManChise
Just purchased LG Hanger and Phalosen forte.. Anyone suggest starting Routine for hanging? I figured I start at 2.5lbs 30 minutes 2 sessions per day and work up from there. I’m 6.25 BPEL my goal is 8.25 BPEL.. Can I get this in a year ? I’m hoping not to go pass 7lbs by adding more hanging time when I get there.Hopefully, PF can can contribute to some of the gains.

To make a multi-inch erect gain it took me 4 years. I started with only 3 lbs and it took 3 full months of dedicated training 5-6 days per week to graduate to the 8 lb. level.
First year one inch. Two more years for second inch, and a fourth year for 3/8” more. In that time span I also gained 1 1/4” - 1 1/2” in erect girth (depending on area of shaft being measured).

Having realistic goals is essential to prepare you mentally for the PE marathon.

Originally Posted by LGHanger
To make a multi-inch erect gain it took me 4 years. I started with only 3 lbs and it took 3 full months of dedicated training 5-6 days per week to graduate to the 8 lb. Level.
First year one inch. Two more years for second inch, and a fourth year for 3/8” more. In that time span I also gained 1 1/4” - 1 1/2” in erect girth (depending on area of shaft being measured).

Having realistic goals is essential to prepare you mentally for the PE marathon.

Great numbers. I’ll have patience.. Did you do it with the LG Hanger alone or you had ADS/Pump as well?

Top

All times are GMT. The time now is 04:36 PM.