Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Looking to gain length with pumping

◀ 123456 ▶

Originally Posted by bookman92
As the title says, I am looking to add a little extra length. I currently have a EL 6.3in and a girth of 5.8in at the centre of the shaft.
I would like to reach over 7 inches in length, and I am pretty happy with my girth, but any extra is just a bonus!

Is it possible to achieve this just through pumping? I understand that the best results come from PE routines, but I simply don’t have enough consistency in my day-to-day life to be able to stick to a lengthy routine.
I have been looking into either the Bathmate or Penomet and I am finding it hard to chose between the two. Do any of you have personal experience with the two? Would just like to know which one would help me more for length gains,

Thanks


I have an LAPump and its perfect. You would need a tall and skinny pump to make your penis be pumped forward rather than outwards. Gauge, clear to see through, etc…

BPEL: 8.35"/ NBPEL:7.0" /EG: Apprx. 5.5"

Originally Posted by djrobins
As a side note does anyone make a 2 1/8" round tube?

I have been wondering the same thing about a 1 5/8" tube for a couple months now. Making a full 1/4" jump is a little much for me. DIY is the best I’ve found so far.
McMaster-Carr
McMaster-Carr

Before 5.5" x 4.1" ///////// Now 7.4" x 4.9"

Last edited by BeardedDragon : 05-18-2015 at .

I’m not sure how you could jump from 5.25” girth to 6 ” within a few days of pumping without edema (unless you had terrible EQ) . Edema is also thicker skin, it’s not only about lymphocele (donut).

Kdong . very interesting but probably out of context to this thread..

I checked your threads and you did a very interesting bundled exercise.
Im feeling like Im doing similar to you.
Can get usable expansion without much edema. I suppose its elastic gains that can revert if you stop doing it. (or needs the occasional high intensity exercise)

Do you still do the bundle corkscrew rotary thing?

Gains Campaign 17-18 Tree Trunk Girth log |-| Ideas/pics log

Must read for healthy PE: PI 's ! Best Routine to Start

Pre-Fatigue length for girth gain?

kdong, this is not your thread about your training log. I created a thread log for you so please, write next posts on there: kdong log .

Last edited by Drako93 : 05-26-2015 at . Reason: link correction

thanks

Kdong Starting: 7.1 x 5.125 vol = 14.84 cu. in. Current: 7.1BPEL 5.5 MSEG = 17cu. in. GOAL --> 8.5 x 6.5 vol: 28.6 cu. in.

Took Time off, lost some gains-- Girth cemented

No PE since 2015 -- starting back up

Back to the topic :)

It seems logical that packing the tube puts more pressure on length, if the tube is packed the only thing you can gain is length right?

Does anyone have any facts to prove this? Like gaining length after switching to a smaller tube?

15/03/10 - Starting size (6.0" length x 5.0" girth) Progress Report

03/09/15 - Current size (6.5" length x 5.5" girth)

??/??/?? - Goal size (8.0" length x 6.0" girth) Syler wants a bigger dick to hurt you with!

Originally Posted by Syler
Back to the topic :)

It seems logical that packing the tube puts more pressure on length, if the tube is packed the only thing you can gain is length right?

Does anyone have any facts to prove this? Like gaining length after switching to a smaller tube?

I noticed more length gains once I started packing the tube up to my circ scar. I think length is the only direction the force can be applied after packing begins.

Started 7.75x5.75

Currently: 9.75bpX6.75eg My Picture Thread

Goal:10.0bpX7.25mseg Building a thicker unit, click by click, pump by pump, jelq by jelq!

Originally Posted by Titleist
I noticed more length gains once I started packing the tube up to my circ scar. I think length is the only direction the force can be applied after packing begins.

This is true however you might want to consider condom pumping with a small diameter tube. If you pack all the way up to your glands then all the force will be concentrated on the glands and you will have more issues with fluid build up in the glands making them desensitized and hard. (temporarily)

I don’t think you should use as much force (HG) pumping this way. Start with shorter sets to make sure you are not getting too much build up in the glands.

Current 5.5 NBPEL x 5.75 Base EG - 5.25 MSEG 7" BPSFL

Short Term Goal 6 NBPEL x 6 MPEG

Long Term Goal 8 NBPEL x 7 MPEG (why not dream BIG?)

Originally Posted by HardHarry
This is true however you might want to consider condom pumping with a small diameter tube. If you pack all the way up to your glands then all the force will be concentrated on the glands and you will have more issues with fluid build up in the glands making them desensitized and hard. (temporarily)

I don’t think you should use as much force (HG) pumping this way. Start with shorter sets to make sure you are not getting too much build up in the glands.

I’ve found my sweet spot with trial and error over the past nine years of pumping. I tried condom pumping and found it wasn’t for me.

Started 7.75x5.75

Currently: 9.75bpX6.75eg My Picture Thread

Goal:10.0bpX7.25mseg Building a thicker unit, click by click, pump by pump, jelq by jelq!

Originally Posted by Titleist
I noticed more length gains once I started packing the tube up to my circ scar. I think length is the only direction the force can be applied after packing begins.

Thanks for the input, I need to hurry up and fill this tube :)

15/03/10 - Starting size (6.0" length x 5.0" girth) Progress Report

03/09/15 - Current size (6.5" length x 5.5" girth)

??/??/?? - Goal size (8.0" length x 6.0" girth) Syler wants a bigger dick to hurt you with!

Originally Posted by Titleist
I’ve found my sweet spot with trial and error over the past nine years of pumping. I tried condom pumping and found it wasn’t for me.

Hi Titleist,

I have managed to pass my BPEL after a similar time to you.

When you say you stay in for a few hours, how do you do that? Is it in say 20 minute intervals with a break? If so, how long is the break?

Do you also stay at around the 4-5hg mark for this?

Thanks in advance

Originally Posted by ollylucas
Hi Titleist,

I have managed to pass my BPEL after a similar time to you.

When you say you stay in for a few hours, how do you do that? Is it in say 20 minute intervals with a break? If so, how long is the break?

Do you also stay at around the 4-5hg mark for this?

Thanks in advance

What I do is not for others. I can stay in the cylinder for 45-60 minutes at lower pressure. Remember it took a long time for me to work up to that amount of time.

Started 7.75x5.75

Currently: 9.75bpX6.75eg My Picture Thread

Goal:10.0bpX7.25mseg Building a thicker unit, click by click, pump by pump, jelq by jelq!

Originally Posted by Titleist
What I do is not for others. I can stay in the cylinder for 45-60 minutes at lower pressure. Remember it took a long time for me to work up to that amount of time.

Thanks for the reply.

Wow must take some conditioning for that time.

What do class as low pressure? I tend to find if I drop below 5hg I can’t maintain being above my BPEL. But have stayed in for 20-30 minutes over BPEL at 5hg and it’s the only method showing me some success at BPEL lengthening.

Do you also do anything after? Like Jelqing or is it best to do that before do you find?

Thanks again

Originally Posted by ollylucas
Thanks for the reply.

Wow must take some conditioning for that time.

What do class as low pressure? I tend to find if I drop below 5hg I can’t maintain being above my BPEL. But have stayed in for 20-30 minutes over BPEL at 5hg and it’s the only method showing me some success at BPEL lengthening.

Do you also do anything after? Like Jelqing or is it best to do that before do you find?

Thanks again

Everyone is different. Find your sweet spot and stay there. I edge after the routine. It relieves any fluid buildup.

Started 7.75x5.75

Currently: 9.75bpX6.75eg My Picture Thread

Goal:10.0bpX7.25mseg Building a thicker unit, click by click, pump by pump, jelq by jelq!

Top
◀ 123456 ▶

All times are GMT. The time now is 08:55 AM.