Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Manko007's road to big dick land

c3ifador asks:

fulcrum
what is the best fulcrum in your opinion?

I’ve tried many. And probably variaty in diameter is key, but I am really liking the PA I bought: https://www.ali express.com/ite … .75d74c4dm3aLkl

Most versatile thing for what I am doing now.

I


Genesis 2006 = 5.8" x 4.7" /// Round 3 2019: Hanging again = 7.99" x 5.5" /// ST Goal 2019 = 8" x 6" /// End Game 2020 = 9" x 6.5"

Originally Posted by beej
Oh man! A tested GFCI receptacle is a must but I would absolutely not fool around with that kind of voltage around the tub. :^/
Stay safe!

Yah no kidding I could have made the news once again lolz


Genesis 2006 = 5.8" x 4.7" /// Round 3 2019: Hanging again = 7.99" x 5.5" /// ST Goal 2019 = 8" x 6" /// End Game 2020 = 9" x 6.5"

Got a goddam blister from precon with phallosan. I think I am done with vacuum hangers. Going back to the good old bib…

But got a good strain today after using PA with bib fulcruming around 7-8kg felt really good. About 3.5%. Fulcrums FTW baby

Thinking of getting a IR lamp that is flexible and can follow me around while I am fulcruming. Then US and heat sock at other end with 3mhz single probe. With the fulcrum is impossible to use 2 US in line as the fulcrum is smack in the middle of the action. Plus I need to use my other hand to put the rice sock at the other end and compress against the transducer so it is flat and waves coming through. If I had three hands, I could do it with two US heads.

We are limited by the technology of our time. When there is cloning we can have two of ourselves to help us’eachother with out dick gains


Genesis 2006 = 5.8" x 4.7" /// Round 3 2019: Hanging again = 7.99" x 5.5" /// ST Goal 2019 = 8" x 6" /// End Game 2020 = 9" x 6.5"

Originally Posted by manko007
Got a goddam blister from precon with phallosan…

Sorry to read this, blisters suck.

Originally Posted by manko007
We are limited by the technology of our time.

Or maybe we are lucky to be living in such technologically advanced times.

If I was born just three lifetimes ago, I would maybe just be reading about something called the light bulb and I would be reading about it by candle light!

Best wishes for a fast recovery from the blister, I too have moved away from vacuum style attachments for the time being.

None the less, we got this!


Once upon a time (2015): 6.40” x 4.50”

Today: 7.25” x 5.00”, Thunder Cocks Unite!

I think we can...Little Engine’s Climb

Originally Posted by manko007
Got a goddam blister from precon with phallosan. I think I am done with vacuum hangers. Going back to the good old bib…

But got a good strain today after using PA with bib fulcruming around 7-8kg felt really good. About 3.5%. Fulcrums FTW baby

Thinking of getting a IR lamp that is flexible and can follow me around while I am fulcruming. Then US and heat sock at other end with 3mhz single probe. With the fulcrum is impossible to use 2 US in line as the fulcrum is smack in the middle of the action. Plus I need to use my other hand to put the rice sock at the other end and compress against the transducer so it is flat and waves coming through. If I had three hands, I could do it with two US heads.

We are limited by the technology of our time. When there is cloning we can have two of ourselves to help us’eachother with out dick gains

Dang Manko, that’s frustrating. I’m first week into month 3 of my first phase of US PE and I went back to the PeniMaster vacuum attachment yesterday and got a small blister. I’ve been using the Bib Hardcore at your recommendation and have had zero blisters and have been able too generate as much pull as needed. My only reason for trying the PM was that the end of my glans has been looking very slightly bruised and my girlfriend, who doesn’t know I do PE, has noticed and stopped giving me blowjobs because she’s like WTF is wrong with you? Any recommendations for reducing bruising at the last tip half of the glans? Maybe I should wrap and put the bib back a little more away from the glans, more proximal to the body, so that there is a little more tissue bunched up between the glans so it doesn’t slip down toward the tip and pinch it a bit. Any advice would be appreciated. Thanks, Doc

Thanks it sucks when you get a blister.

I used to get my head would look purple. I cant remember what it is. Its either your not takimg blood out your head before you attach or attachong too close to head.

Searching on the forum and online you can find extensively what to do as many people have that issue.

I know how that is though my dicks been through that meat grinder before and looking raw. Trial and error with the bib


Genesis 2006 = 5.8" x 4.7" /// Round 3 2019: Hanging again = 7.99" x 5.5" /// ST Goal 2019 = 8" x 6" /// End Game 2020 = 9" x 6.5"

Someone messaged me asking how much US is safe. Just post here plz

Ive done multiple sets of US for days and at some point it started to feel a little rubbery. But im fine

Ovbiously subjecting your dick to lesser amounts of US is common sense safer. So try to limit as much as you can and only increase if you see a marginal benefit in bpfsl strains

If you dont see a benefit then there is no reason for extra use

Once a day should be fine 15min a day

But ive done over 45min a day and fine

Just focus on marginal increases in your bpfsl tho


Genesis 2006 = 5.8" x 4.7" /// Round 3 2019: Hanging again = 7.99" x 5.5" /// ST Goal 2019 = 8" x 6" /// End Game 2020 = 9" x 6.5"

pencil wrapping

So I think I’ve come up with a solution for those of us who use the bib to target the cord…. the elusive cord which swims in a pool of tissue, and is therefore hard to grasp with the walls of the bib

The way I envision this is as follows:

-place phallosan/vaccum cup/or some other ads to assist in thinning out your shaft straight out
-once in place shaft will be as thin as it can be for pencil wrapping
-starting from the most distal point (which should be right below the vac cup) start wrapping with bib tape (forgot the name, sorry), the elastic that comes with the bib 1” by as much as you need
-wrap AS TIGHTLY as you can, this means super ultra tight, winding down all the way to the base of your dick
-the point is to make your dick as thin as possible, so that your inner tissues, along with your cord, are ORGANIZED in a nice longitudinal way
-if one were to take a cross section of your dick at this point, it should look like a piece of sushi roll, nice and organized\
-this organization allows the easier grasping of the infamous cord, aka. as VT, ventral thickening in my case, and probably DT, dorsal thickening for others
-your dick will look like a pencil, with a head. The thinner the pencil the better

OH and yeah, use that very thin ACE cushion wrap that is sponge like, not the skin color one that is thick, there is one is super super thin, grey color. This for when you remove your bib tape, it won’t hurt your skin like a mofo

Without this pencil like organization, grasping the cord becomes quite difficult, like I said swimming in a pool of tissue, thus when attaching the bib your success rate in any one seshion at lenghtening your cord is purely determined by how well you’ve grasped it. With pencil wrapping, your success at this goes up, and thus your sessions are more effective

So you may ask, well why wrap to the base? Because I am thinking divide and conquer.

We can hang for 3, 20 min sets.
-1st set, pencil wrap to base, attach bib at base and hang. Apply US, fulcrums,etc whatever you want.
-2nd set, pencil wrap to middle, attach bib at middle and hang, repeat above, etc
-3rd set, pencil wrap to 1”inch before coronal ridge (the “normal” wrap) and hang, repeat above

Each set is designed to marginally attack the cord in sections. From base, to middle, to right before head.

One can progressively overload in an inverse triangle, such that if 1st set the weight is not causing fatigue, because it is easier to hang, one can hang e.g. 10kg. Then at middle, 8kg, then at “normal” 6kg. Thus the inverse pyramid/triangle.

The set progressively builds up on the last.

Another benefit is attachment pain is reduced because you are not attaching at the same spot over and over again. This way my main problem and why I haven’t been hanging for so many months.

Another benefit is only 1 US is required because you are segmenting your dick into 3 points. You only heat the marginal exposed shaft. At set 1 you heat right before base. At set 2 you move up higher, at set 3 you move up even higher.

And another benefit, is reduced blood, thus an empty ‘pool’ for your cord to swim in, and prob safer too. Your head can be plump, as in my experience, this has never mattered. In fact, higher blood oxygen in your head for 20min.

I am going to try this soon. Hopefully I get some good strains at t3, with minimal attachment pain, and replicable loads with the pencil wrapping.

Also, I’ve been thinking the best way to grasp the shaft/internal/cord is not with the modified bib that Xeno made. It is good to have a < shape. But if you think about it, the more surface area that is strictly parallel to the walls of the bib, the greater the grasping. Rather than a hot spot at the beginning of <.

So I’m gonna pretend my dick is a pencil, and my bib’s walls need to grab this pencil in perfectly parallel fashion, to have more surface area, thus more friction, and better grasping.


Genesis 2006 = 5.8" x 4.7" /// Round 3 2019: Hanging again = 7.99" x 5.5" /// ST Goal 2019 = 8" x 6" /// End Game 2020 = 9" x 6.5"


Last edited by manko007 : 10-15-2019 at .

bib’s walls need to grab this pencil in perfectly parallel fashion, like = instead of < where X is base , < is bib, and D is head. I would hang like X is base, = is hanger, D is head. In three spots. Base, middle, and normal. to have more surface area, thus more friction, and better grasping.


Genesis 2006 = 5.8" x 4.7" /// Round 3 2019: Hanging again = 7.99" x 5.5" /// ST Goal 2019 = 8" x 6" /// End Game 2020 = 9" x 6.5"

Originally Posted by manko007
Someone messaged me asking how much US is safe. Just post here plz

Ive done multiple sets of US for days and at some point it started to feel a little rubbery. But im fine

Ovbiously subjecting your dick to lesser amounts of US is common sense safer. So try to limit as much as you can and only increase if you see a marginal benefit in bpfsl strains

If you dont see a benefit then there is no reason for extra use

Once a day should be fine 15min a day

But ive done over 45min a day and fine

Just focus on marginal increases in your bpfsl tho

Disclaimer: This is unchartered territory, everything that you read here on TP that people are doing with US assisted PE is experimental and we are our own subjects. So please be careful, start slowly and listen to your body. I have been in for almost 3 months, I will post month 3 results at the end of the month. But for now, I do 3 days on and 2 days off, more or less depending on my work/travel schedule, but after a 20 - 30 min pre con with no heat, I do 3 x 10min US session for each of those at 2W, 3MHz, 100% duty cycle. First month I started with 2 x 10min, but felt it wasn’t enough to get the elongation I was desiring, so I added another 10 minutes. I really like to cook my cord, especially the proximal half as it inserts into the pubic bone. It has grown thick and resistant to PE - US has definitely allowed me to start gaining again. I have not had any issues at all, in fact, I have grown to believe that US is therapeutic and I enjoy the feeling of heating up my unit and look forward to my sessions. Today I hit 200mm BPSFL2, a new record for me, starting from 180mm BPSFL1 August 1st. Considering I had hit a 1 year plateau prior to this, I am beyond happy.

Its therapeautic but follow the contraindications the most important one probably being dont use it if you got cancer on your dick as it will stimulate cellular growth I think it says on the manual

Other than that I think its pretty safe


Genesis 2006 = 5.8" x 4.7" /// Round 3 2019: Hanging again = 7.99" x 5.5" /// ST Goal 2019 = 8" x 6" /// End Game 2020 = 9" x 6.5"

I tried my pencil wrapping technique and it is quite good so far. I have to do it for a while before I can say it is

But I got .5cm strain in two sets base and middle where everything else I had been trying was failing to even come close.

Too early to tell however. I could have measured wrong etc.

Couldnt segment into three due to time contraints but stretching from the base felt really good.

Another effect I noticed was the hanger still slides and puts pressure on the head. So its like a really really intense jelq if you think about it. For 20min. This may lead to some head gains. My head was under so much pressure it was looking pretty big. And then after my 1st set i went back in the vacuum cup i couldnt fit it so i had to use my bigger cup. Then my expansion during vacuum grew even bigger and back into pencil wrapping and hanging causing even more pressure on sec set.

Head was fine even with all the pressure and not removing blood before attaching bib. As usually everyone looses their minds about that

Attachment pain was not as bad as I remember


Genesis 2006 = 5.8" x 4.7" /// Round 3 2019: Hanging again = 7.99" x 5.5" /// ST Goal 2019 = 8" x 6" /// End Game 2020 = 9" x 6.5"

Originally Posted by manko007
Someone messaged me asking how much US is safe. Just post here plz

Ive done multiple sets of US for days and at some point it started to feel a little rubbery. But im fine

Ovbiously subjecting your dick to lesser amounts of US is common sense safer. So try to limit as much as you can and only increase if you see a marginal benefit in bpfsl strains

If you dont see a benefit then there is no reason for extra use

Once a day should be fine 15min a day

But ive done over 45min a day and fine

Just focus on marginal increases in your bpfsl tho

I have been using ultrasound now for a whole year.
I have not accidentally cooked my dick. And using tolerable intensity I doubt no one will.

Using it as Manko described as minimal as possible to me it is 20 min at time. It can be used in every session but prefer not for the whole session.

My penile health is significantly better now than year ago.


START 18/13.15 cm Jul 24th 18 (7.09/5.18") NOW 22.5/15.2 cm Fer 12th 20 (8.86/5.98") GOAL 8.5"/ 6"

When connective tissue is stretched within therapeutic temperatures ranging 102 to 110 F (38.9- 43.3 C), the amount of structural weakening produced by a given amount of tissue elongation varies inversely with the temperature. This is apparently related to the progressive increase in the viscous flow properties of the collagenous tissue when it is heated. (Warren et al (1971,1976)

Manko007 Regarding US, I’m searching but getting a bit confused. Is there any models or specs you could advise Me to search for?

I’d get the soundcare plus if you can afford it. It has all the specs you’d need.

Im on the fence about using 2 US transducers at the same time. So im planning to return my omega US. Its kind of impractical for fulcrums and dont get the same heat as 3mhz

Tensunits or tenspro are the places Ive boight mine. Tenspro i got the soundcare plus for $650 when they have sales

Tensunits i got the Omegas.

Before I settled on soundcare plus I gave up searching because there are not many options with decent specs. Basically you want 1.6cm^2 and above for intensity and a 4cm^2 transducer head. And 3mhz or 1mhz are basically same. But 3mhz heats faster.

Soundcare plus has all the options above

There are some 3mhz on ebay from India. Longerstretch has one he wrote a post about it or ask him more details

If you are planning to use it underwater id def suggest the soundcare plus. The whole probe is waterproof. I almost ruined my omegas as thry said the head was waterproof but literally only the transducer area joint


Genesis 2006 = 5.8" x 4.7" /// Round 3 2019: Hanging again = 7.99" x 5.5" /// ST Goal 2019 = 8" x 6" /// End Game 2020 = 9" x 6.5"

Top

All times are GMT. The time now is 04:00 AM.