Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Quick Extender Pro Struggle.

12

Quick Extender Pro Struggle.

Hi guys,

I’ve been struggling like mad to figure out whether I’ve been wearing this right, I’ve looked through all the threads on here but still can’t understand whether I’m right or not. Plus there’s the issue with the noose constantly sliding out of place loosening it from the sled which requires me to fix it every so often and having the layers of comfort constantly slide with the glans trying to move down. At this point I’m really growing tired and I would appreciate someone to help me out here before I pull my hairs out haha… I’m going to link my thread where I posted pictures of wearing the extender, I just don’t know what to feel or whether its on right and how I’m going to keep it secure with proper comfort.

The Adventure For Big Progress Report (p. 4)
Page 4.

Thank you.


Journey for da pipe!

I don’t use the product, so there’s that caveat. But can you bunch up more skin around the glans to be a greater “stop” for the noose? On the other page, it looks like everything above the noose is just glans.


IMAGE: Current 6-Inch-plus flaccid | IMAGE: 6 inch girth flaccid head | IMAGE: Ideal flaccid | IMAGE: Fulcrum stretch | IMAGE: 6.5 flaccid hang w/ ADS | IMAGE: Flaccid post-stretch | IMAGE: Hang balls | IMAGE: Big ballsack

Measurements - Flaccid Length (Non-Stretched): 6+ inches | Flaccid Shaft Girth: 5 inches | Flaccid Head Girth: 6 inches | Erect (BPEL) Length: 7-7/8 Inches; Erect Shaft Girth: 5.5 Inches | Erect Head Girth: 6.5 Inches

"Go and do likewise, gents."

TG discusses adjustment and also has some installation comments here:

How to Read & Adjust Rod style Traction Devices (X4/Size Genetics/JES/Similar)

From my days with a noose extender I replaced the noose when it started to slip. My X4 came with extra nooses.

Options suggested by other members and sources for replacement noose material include:
- 6mm silicon vacuum hose
- surgical tubing is also reported to work
- Slide a wide rubber band into the slot between noose and aled can also prevent slipping.

If you have the strap type instead of noose, wedging a penny between strap and slot can keep it from slipping is reported to help.


Initial: 7” BPEL; 6” NBPEL; 5.25” - 5.5” MEG

Current: 7.75” BPEL; 7.25” NBPEL; 8.5” BPFSL; 6.5” MEG; 6”x5” Flaccid.

Goal: Improved/consistent EQ while managing ED. Secondary: maintain current stats.

Originally Posted by Don Logan
I don’t use the product, so there’s that caveat. But can you bunch up more skin around the glans to be a greater “stop” for the noose? On the other page, it looks like everything above the noose is just glans.

I’ve tried something like that, issue is it causes pain over time with the terrible comfort while the noose is on. Here, I’m posting two images of what I mean by it slipping the grip of my unit on the sled.

sssz.png
(423.2 KB, 50 views)
extendhelp.jpg
(125.0 KB, 51 views)

Journey for da pipe!

I used the Auto Extender Vac Mod 4.x - it’s way better than the noose method and you can use it for hanging too. There’s a learning curve with it, but highly recommended.


Mar21 - BPFSL: 6.5", BPEL: 6.5", NBPEL: 6", MEG: 5.5"

Jan22 - BPFSL: 8" (cold), BPEL: 7.5", NBPEL: 6.875", MEG: 5.5"

One Day - BPFSL: 9.5", BPEL: 9", NBPEL: 8.5", MEG: 6"

Yeah, I’m seriously contemplating to get that. I’m really growing frustrated with this device, either I’m really stupid or I just can’t wrap my head around this stuff… It’s really flaring up my anxiety.

Reading that thread, the one thing that I see EVERYWHERE but still can’t seem to achieve:

‘*To get tension from the device and use it properly YOU MUST COMPRESS THE DEVICE TOWARDS YOUR BODY AS YOU STRAP IT ON. If you do not do this, you will read and experience very low or ZERO levels of tension. You will merely be holding your penis in the flaccid state with no actual force exerted upwards to stretch it.’

I literally can’t strap in while holding it down its so finicky, but when I manage to strap in and let go I still see all the lines - so I know I’m doing something wrong.


Journey for da pipe!

Originally Posted by SuperBad8
I used the Auto Extender Vac Mod 4.x - it’s way better than the noose method and you can use it for hanging too. There’s a learning curve with it, but highly recommended.

You wouldn’t happen to have a link to the product? I would appreciate it.


Journey for da pipe!

I tie it with a shoelace works well

I use velcro to keep the noose secured in the slots so it does not slip.


Big cock, tight abs, fit body, strong mind.

Tie the ends of the noose together using a string or shoelace. That works for me.

Originally Posted by adventureforbig
You wouldn’t happen to have a link to the product? I would appreciate it.

Penis Stretcher Products & Natural Penis Enlargement without Pills

Scroll on that page until you see Modified VacExtender v4.x

I used it with my extender then switched to using it for hanging. Works great, just make sure you learn to tape your glans the right way so that you don’t get blisters. Search for taping - I use 3M Microfoam tape since its easier to take off than Micropore tape.

Here’s a thread with some good taping info in it…

VacHanging and taping


Mar21 - BPFSL: 6.5", BPEL: 6.5", NBPEL: 6", MEG: 5.5"

Jan22 - BPFSL: 8" (cold), BPEL: 7.5", NBPEL: 6.875", MEG: 5.5"

One Day - BPFSL: 9.5", BPEL: 9", NBPEL: 8.5", MEG: 6"

adventureforbig,

I’ve been successfully using the QEP for a little over 1-1/2 years and I started off with all of the frustrations that you are experiencing. The QEP does work once you can figure out what works best for you. Here’s a list of things I have done and modifications I have made:

1. Stopped using the (dis)comfort pads and switched to using a silicone sleeve. The pads caused me a lot of pain because it irritated the skin behind the glans terribly. I tried a bunch of different things but finally switched to using a silicone sleeve…total game changer for me! (see post #37: Cunny Linguist - How to use an extender at high tension without slippage?)
2. I found that compressing the springs while silmutaneously trying to stretch my penis out and tighten the straps was pretty much impossible. I mad a modification to the glans support that allows me to strap my penis to the glans support FIRST and then fit the glans support on to the rods. This allows me to get my penis really stretched out. (see this post: Cunny Linguist - Quick Extender Pro Question)
3. I am a grower, so my penis really stretches quite a bit while extending. To keep tension on my penis, I use the threaded rods at the base to unscrew the rods in order to increase length as my penis stretches out during my extending session. IF you are going to do this, you MUST use a thread locker to secure the threaded rods into the base so that threaded rods don’t unscrew from the base.
4. I don’t use the double strap, I use a single strap in the top holes and I feed the straps back through the bottom holes to lock them in place. (see this image: IMG_3358_resize.JPG)

I hope this helps you out. I am more than happy to answer any questions you might have!


Last edited by Cunny Linguist : 08-16-2022 at .

Originally Posted by Cunny Linguist
adventureforbig,

I’ve been successfully using the QEP for a little over 1-1/2 years and I started off with all of the frustrations that you are experiencing. The QEP does work once you can figure out what works best for you. Here’s a list of things I have done and modifications I have made:

1. Stopped using the (dis)comfort pads and switched to using a silicone sleeve. The pads caused me a lot of pain because it irritated the skin behind the glans terribly. I tried a bunch of different things but finally switched to using a silicone sleeve…total game changer for me! (see post #37: Cunny Linguist - How to use an extender at high tension without slippage?)
2. I found that compressing the springs while silmutaneously trying to stretch my penis out and tighten the straps was pretty much impossible. I mad a modification to the glans support that allows me to strap my penis to the glans support FIRST and then fit the glans support on to the rods. This allows me to get my penis really stretched out. (see this post: Cunny Linguist - Quick Extender Pro Question)
3. I am a grower, so my penis really stretches quite a bit while extending. To keep tension on my penis, I use the threaded rods at the base to unscrew the rods in order to increase length as my penis stretches out during my extending session. IF you are going to do this, you MUST use a thread locker to secure the threaded rods into the base so that threaded rods don’t unscrew from the base.
4. I don’t use the double strap, I use a single strap in the top holes and I feed the straps back through the bottom holes to lock them in place. (see this image: IMG_3358_resize.JPG)

I hope this helps you out. I am more than happy to answer any questions you might have!

Thank you!

I wanted to ask what O-RING dimenson you’re using to put on the sleeve? I’m trying to look for the same one online since O-Ring’s come in different sizes.

And yeah I also unscrew the rods to extend it as well since my unit stretches a bit more even while extending - without the thread locker though, I can get away with being careful.


Journey for da pipe!

I use two 4x4 gauze. For under my head. I unwrap them into a large rectangle and then in half so they form a long thin rectangle I can wrap around and secure with medical tape.

I put the second gauze on top the other in the same way and secure it with medical tape.

I use surgical tubing to hold my head down by folding a long price in half and feeding the loop end through one hole and the no loop end through the other.

I then tie them together with a pen to make it easy to undo later. That seems to work great for me and prevent any slips

If that makes sense. Hope that helps brother!


Just want to be happily me. ;)

Start: BPEL 6.3" EG 5.1"

Now: BPEL 7.5" EG 5.7" Goal: MORE

Top
12
Similar Threads 
ThreadStarterForumRepliesLast Post
Quick Extender Pro QuestionErock28Penis Extenders3602-08-2022 06:24 PM
Quick Extender Pro or Auto Extender Vac?splinter36Penis Enlargement Basics1601-27-2022 09:08 PM
Best vac cup mod that works with Quick Extender ProdoingthisthingPenis Enlargement Basics012-08-2020 11:07 PM
Quick Extender Pro warning.beware.LarryLafferPenis Enlargement Basics005-22-2020 05:53 PM
Request for Advice: Quick Extender ProLerimeurPenis Extenders806-19-2014 02:56 PM

All times are GMT. The time now is 07:35 PM.