The big penis and mens' sexual health source, increasing penis size around the world.
I remeasured and believe a safer bet for the cyclinder I buy would be 1.75” if I’m around 4.75” EG
Are you supposed to go by base girth or or mid-shaft? I don’t have a large deviation between the two.
Let me know I guess, and I’ll verify.
Thanks in advance
May 2018 6" x 4.75" 3-6mon Goal:
BPEL 7x5 6-12month BPEL 7.5" x 5.25”
No plan on stopping unless I hit 9” x 6”
Go by base girth and you are correct that the 1.75” cylinder will be perfect for you.
The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.
Hey, guys I’m new here I wonder if you can help me choose the correct cylinder.. So I want to expand my girth mainly and for now I would like to pump before sex so I get some temporary results to begin with.. My cock is 20 cm maybe 19,5 at a bad day and my girth mid shaft 5.5 inches. The two penis pump have these size measurements. First one is 9 inches length and 2.25 diameter but doesn’t have pressure gauge so it could be dangerous and the other one is 9 inches and 2.35 inches diameter but it has a pressure gauge. As I said I want to focus more on girth. Also most people that pump have the problem or turtling or just the people that overdo it at high pressure? Keep in mind that I can’t find easily other penis pump with 9 inch length and less diameter in the price range that I want to spend. So from these two that I mentioned could they help me to get temporary girth results for sex?
This is the pump I use it be perfect if the cylinder was smaller
This is the pump I use it be perfect if the cylinder was smaller
https://www.ama zon.com/gp/aw/d … mp_s_a_1_2_a_it
If a 2" cylinder is the correct size for you, this LeLuv pump is a professional quality pump for less money and it will last way longer then the pump you show. If you bid the starting price, you will probably get it for that and shipping is included.
Edit: link removed as no longer valid.
The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.
Hi everybody, newbie here just getting started pumping but I need to know the best size for me. I am 5.5 BPEL and 5.5 girth. My primary goal is length with secondary girth. What size do you recommend for me? I’m looking at using the elliptical thick wall cylinder from vacutech. I was going to order the 1.5 x 2.0 9” sized cylinder for length. Is this a good choice? I could use recommendations on which brand is best also, thank you
Hi everybody, newbie here just getting started pumping but I need to know the best size for me. I am 5.5 BPEL and 5.5 girth. My primary goal is length with secondary girth. What size do you recommend for me? I’m looking at using the elliptical thick wall cylinder from vacutech. I was going to order the 1.5 x 2.0 9” sized cylinder for length. Is this a good choice? I could use recommendations on which brand is best also, thank you
As a newbie, I don’t see a reason to buy expensive equipment until you have tried pumping and either like it or hate it. I would recommend the exact size LeLuv pump in my post #1190 directly above. You will probably get it it you make the minimum bid and shipping is free.
The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.
I like the Thickwall cylinder but they are not cheap. They have a size scale (how long and wide cylinder to buy) on their website you can use for any cylinder. It worked for me.
So, I am looking for length and gprent’s chart has been very helpful in helping me pick cylinders so far (thank you!). I am currently packing a 1.75 cylinder too tight and to the point where I can’t get the penis to stretch no matter how much pressure I use (I never go more than 6 in/hg) and I am packing the first inch and a half of a 2.00. The 2.00 does a great job of giving me a great pump and I expand nicely in it. But, I am wondering if there’s anybody out there who makes a good quality cylinder around 1.875 inches. I’d like to be able to pack the cylinder (like I do the 1.75) but still allow my penis to stretch when I pump. My current stats are 6.00 BPEL and 6.00 BEG and 5.75 MEG. My goal is to gain some more length (7.00 BPEL) before working on girth again. All links to pumps I’ve seen so far only have the 1.75 and 2.00 (and greater). Anybody know where I could go for a 1.875X9-1.925X9 (or custom) size cylinder?
How long do you pump for?
For me, I get the best post pump length results using my incremental pump routine and staying in the cylinder for 30 minutes of continuous pumping. Look at the 1st post in my incremental pump routine thread to see how I do it.
The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.
I, I’m Damien, my problem is that nature has not given me a good deal, it seems to me, what would you recommend to buy or what to do, dust to improve I really care for all budgets I have not limited. My size is 5inch x 5inch on full erection
I would like some 2 inches more who knows what will happen in the future
I am asking for advice
I, I’m Damien, my problem is that nature has not given me a good deal, it seems to me, what would you recommend to buy or what to do, dust to improve I really care for all budgets I have not limited. My size is 5inch x 5inch on full erectionI would like some 2 inches more who knows what will happen in the future
I am asking for advice
Go to the FAQ and follow the Important Newbie Threads/Info
firegoat is fully RETIRED from Thundersplace.
All injuries happen from "too much", or "too much, too soon" or "doing the exercise incorrectly".
Heat makes the difference between gaining quickly or slowly for some guys, or between gaining slowly instead of not at all for others. The ideal penis size is 7.6" BPEL x 5.6" Mid Girth. Basics.... firegoat roll How to use the Search button for best results
How long do you pump for?For me, I get the best post pump length results using my incremental pump routine and staying in the cylinder for 30 minutes of continuous pumping. Look at the 1st post in my incremental pump routine thread to see how I do it.
I’ll try that routine. I am assuming you are advising me to do this in my 2.00 cylinder as I simply cannot fit in the 1.75 cylinder. I can’t go that high on the pressure yet either. I’m going to try the incremental routine progressing from 4 in/hg to 6 or 6.5 in/hg. Also, Most advice talk about no more than 20 minutes in the tube at any given time. I usually do 3 sessions of 10 minutes each with a couple of minute break in between sets. I’ll slowly increase time in the tube and watch my body cues. Thanks for your input!
I’ll try that routine. I am assuming you are advising me to do this in my 2.00 cylinder as I simply cannot fit in the 1.75 cylinder. I can’t go that high on the pressure yet either. I’m going to try the incremental routine progressing from 4 in/hg to 6 or 6.5 in/hg. Also, Most advice talk about no more than 20 minutes in the tube at any given time. I usually do 3 sessions of 10 minutes each with a couple of minute break in between sets. I’ll slowly increase time in the tube and watch my body cues. Thanks for your input!
As I say in the second paragraph of the 1st post, start with a 15 minute session that begins with 5 minutes @ 3”hg, increase to 4”hg for additional 5 minutes and then increase to 5”hg for the final 5 minutes. Then slowly add time until you get to 30 minutes and then slowly start increasing the pressure so the final time is @ 6”hg.
Yes, use your 2” tube.
The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.
As I say in the second paragraph of the 1st post, start with a 15 minute session that begins with 5 minutes @ 3”hg, increase to 4”hg for additional 5 minutes and then increase to 5”hg for the final 5 minutes. Then slowly add time until you get to 30 minutes and then slowly start increasing the pressure so the final time is @ 6”hg.Yes, use your 2” tube.
So, I tried that last night with great results. I got in the 1.75 tube for 15 minutes at 5 in/hg and increased pressure every 5minutes until finishing at 6.5 in/hg. I then massaged for 3 minutes and went to my 2.00 tube. I started at 5 inches and increased 0.5 in/hg every 5 minutes, finishing the first 15 minute set at 6.5 in/hg. Massaged for 2 minutes and did one more set of 15 minutes starting 6 in/hg and finishing at 7 in/hg. I warmed up with hot shower, then used a hot rice sock while doing all three sets. After all that, I got into my Phallosan Forte (with lots of difficulty, lol) and kept the stretch going for an hour and a half. Lastly, I put on an anti turtling sleeve before going to bed. The greatest difference I noticed was that my penis was elongated and engorged for most of the night. It was the first time it has done that and it felt and looked great. I’ll be doing this routine again today, but skipping the 1.75 tube, then take one day off from pumping, then do it again on Thursday. Thanks again for your input, I appreciate that!