The big penis and mens' sexual health source, increasing penis size around the world.
Hello, thank you for replying. I was thinking of getting this one?
You realize that would be coming from England? Leluv puts together a great setup for low cost and have never heard a complaint. Plus it is free shipping. :)
The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.
You realize that would be coming from England? Leluv puts together a great setup for low cost and have never heard a complaint. Plus it is free shipping. :)
Yes I understand that its just the one from ebay comes from china lol the other one comes from uk yes I know its the quality I guess? Idk
Yes I understand that its just the one from ebay comes from china lol the other one comes from uk yes I know its the quality I guess? Idk
I don’t see where it says it is made in China. I just know that Kodi Distributing LLC sells them from right here in Arizona and it’s a professional quality pump. But they are both very good pumps, just one costs less and will get to you a lot faster. In fact, for guys that live in Europe I always recommend Thickwall.
The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.
I don’t see where it says it is made in China. I just know that Kodi Distributing LLC sells them from right here in Arizona and it’s a professional quality pump. But they are both very good pumps, just one costs less and will get to you a lot faster. In fact, for guys that live in Europe I always recommend Thickwall.
Oh okay, it shows it when you scroll down it says Country/Region of Manufacture: China but I will take your word for it - both brands look the same, thank you for the help. Only thing is I will need the seal for the bottom (where can I order the seal? - thick wall gives an option) - what pressure does it need to be and what do I do to get gains using the pump (dry jelq too) read something about heating pad too I read bullmaster is good for balls too but thats expensive haha. Sorry for all the questions lol
Oh okay, it shows it when you scroll down it says Country/Region of Manufacture: China but I will take your word for it - both brands look the same, thank you for the help. Only thing is I will need the seal for the bottom (where can I order the seal? - thick wall gives an option) - what pressure does it need to be and what do I do to get gains using the pump (dry jelq too) read something about heating pad too I read bullmaster is good for balls too but thats expensive haha. Sorry for all the questions lol
The comfort sleeve, or donut as it is sometimes called is not completely necessary. It only helps reduce discomfort around your base/public bone.
As far as pumping pressures and stuff like that goes, check out the first page of this thread and that will give you a good intro to pumping.
Also, check this one out if you’re new to PE
START HERE ——-> NEWBIE ROUTINE <——- Important Newbie Info
Go slow and good luck!
I did 20 minutes sets during several days.
I just want to worry (as other users did) everybody not to go more than 5”hg.
I got a permanent puffiness look and feel in my glans, it’s less hard in erection now, the shaft too. Now 2 weeks since that intense routine and I think it’s permanent. My cock now feels bigger/heavier but I don’t like the feeling it’s like the outer edema now is permanent plus my head got that edema look (slightly). It doesn’t feel like CC widening, CS feels bigger now.
I will wait other 2 weeks and get a pumped erection to evaluate my erection hardness with the pump aid. I think you can screw the whole thing if you stretch too much the tunica. In head CS tunica is thinner so maybe pumping does that. Look at Shane Diesel cock its look like too much edema deformation with stretched skin. I have stretched skin. Wish I got that CC size haha at least it’s floppy but huge.
The comfort sleeve, or donut as it is sometimes called is not completely necessary. It only helps reduce discomfort around your base/public bone.As far as pumping pressures and stuff like that goes, check out the first page of this thread and that will give you a good intro to pumping.
Also, check this one out if you’re new to PE
START HERE ——-> NEWBIE ROUTINE <——- Important Newbie Info
Go slow and good luck!
Thank you, I measured - I am 6” and 5” circumference. What size would that be for the pump? My goal is 9”. I am uncircumcised
The comfort sleeve, or donut as it is sometimes called is not completely necessary. It only helps reduce discomfort around your base/public bone.As far as pumping pressures and stuff like that goes, check out the first page of this thread and that will give you a good intro to pumping.
Also, check this one out if you’re new to PE
START HERE ——-> NEWBIE ROUTINE <——- Important Newbie Info
Go slow and good luck!
Whats a good cock ring? Goal is 12” max and 11” thickness haha. On thickwall sizing it says this If you measured 6″ :
6″ / 3.142 = 1.9″ diameter
You would need a 2 1/4″ cylinder because a 2″ cylinder would not allow for expansion. But when I put 5” circumference it says 1.6 diameter? Maybe I am 5.5 circumference?
Alright guys. I am relatively new and have some questions. I started a couple months ago buying both the regular and full package cylinder from Dr Kaplan. I was using his program, and after doing more research (and reading the beginning of this thread), his was kinda intense to start out, and I had an issue with the red dots. I also was taking aspirin daily when I didn’t really need to be doing so, so I thought that the combination of the too intense routine and the aspirin was leading causing my issues. After the cylinder I was using developed a crack (which I thought was weird considering I wasn’t going above 3.5hg at the time), I decided I needed a break because I was so frustrated. I got off the aspirin regimen, because I really don’t need to be doing it, and I got a new cylinder and started again last week, I’ve been comfortable between 4 and 5hg for three sessions trying to follow the routine at the top of the thread (I’ve only been doing 10 minutes). There were break days in between each day both due to working a lot and wanting to take it pretty easy to not have the red dot issue again. Then today, after a two day rest, I noticed the dots an hour or so after the workout. I did do 7-8 mins of jelqing after the pump and massage. The only difference today was that I was sipping a little bourbon throughout the day before I decided to do my workout. Could simply having a little to drink during the day thin my blood enough to cause the red dot under vacuum or do we think I may be using too much pressure while jelqing? I really like the results I get when I’m not getting the red dots, but this has been an ongoing issue and I’m just really getting tired of having to stop and start over repeatedly. Any help anyone can give would be greatly appreciated.
Hi all, does anyone what I can do to help with length gains with a wide tube. Tube diameter is 2.5, until I order a new more professional pump I want to get the use out of the current, I’m wondering what I can do. I’ve been pumping high to pack the tube higher and then drop pressure for rest of session and another thing I’ve been doing is pumping with the foreskin pulled right back, which pulls on the glans and seems to give a stretch throughout the session, I do these as separate sessions.
Does this sound good for length gains and is there anything else that I could look into?
Alright guys. I am relatively new and have some questions. I started a couple months ago buying both the regular and full package cylinder from Dr Kaplan. I was using his program, and after doing more research (and reading the beginning of this thread), his was kinda intense to start out, and I had an issue with the red dots. I also was taking aspirin daily when I didn’t really need to be doing so, so I thought that the combination of the too intense routine and the aspirin was leading causing my issues. After the cylinder I was using developed a crack (which I thought was weird considering I wasn’t going above 3.5hg at the time), I decided I needed a break because I was so frustrated. I got off the aspirin regimen, because I really don’t need to be doing it, and I got a new cylinder and started again last week, I’ve been comfortable between 4 and 5hg for three sessions trying to follow the routine at the top of the thread (I’ve only been doing 10 minutes). There were break days in between each day both due to working a lot and wanting to take it pretty easy to not have the red dot issue again. Then today, after a two day rest, I noticed the dots an hour or so after the workout. I did do 7-8 mins of jelqing after the pump and massage. The only difference today was that I was sipping a little bourbon throughout the day before I decided to do my workout. Could simply having a little to drink during the day thin my blood enough to cause the red dot under vacuum or do we think I may be using too much pressure while jelqing? I really like the results I get when I’m not getting the red dots, but this has been an ongoing issue and I’m just really getting tired of having to stop and start over repeatedly. Any help anyone can give would be greatly appreciated.
Hi mate, ye I had red dots some weeks in to my sessions, which I didn’t think much of til they started getting worse, ( darker bigger, to the point of looking bruised) so take more rest to let them heal, capillaries I believe someone told me, otherwise it means having to take longer if they’re more aggravated, 2 weeks I had to take, so maybe take 3- 5 days, little more to be safe.
Hi all, does anyone what I can do to help with length gains with a wide tube. Tube diameter is 2.5, until I order a new more professional pump I want to get the use out of the current, I’m wondering what I can do. I’ve been pumping high to pack the tube higher and then drop pressure for rest of session and another thing I’ve been doing is pumping with the foreskin pulled right back, which pulls on the glans and seems to give a stretch throughout the session, I do these as separate sessions.Does this sound good for length gains and is there anything else that I could look into?
Just forgot to add, I also stretch routinely, only manual as that’s all I can do. I jelq, not as routinely, sometimes after my pump session, sometimes in the shower. Length had stopped for me once I hit 7”1 from a start of 6”5 over the course of about 5 years.
This may sound strange but, what’s the best way to get a donut (doughnut)? I remember reading a few accounts of people growing extra foreskin as a result of long-term pumping. I’ve already tried various other foreskin restoration methods for years with little success so I’m interested in giving this a try.
Also, does anyone have any experience with the Mityvac Silverline pump? I’m a bit concerned about corrosion.
It comes from time under pressure and the amount of vacuum used. You have to be careful that you don’t cause water blisters on your glans. I’ve had some massive donuts from my early days. It didn’t promote lasting extra skin.
Started 7.75x5.75
Currently: 9.75bpX6.75eg My Picture Thread
Goal:10.0bpX7.25mseg Building a thicker unit, click by click, pump by pump, jelq by jelq!
It comes from time under pressure and the amount of vacuum used. You have to be careful that you don’t cause water blisters on your glans. I’ve had some massive donuts from my early days. It didn’t promote lasting extra skin.
I see. I suppose you did your best to avoid them though.