Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Igigi's quest for the foot long with UltraSound Therapy

Originally Posted by djrobins
1cm gain in a year is awesome and after many years we get zero gains. You’ve released 2CM of new growth in a few weeks using US heating. Amazing.

Thank you brother I appreciate it.

Absolutely, I am amazed by the results, extremely motivated to keep going, and this is 100% proof that the science is correct. After literally almost 10 years of seeing ZERO stretching of the Septum, now I have an extra centimeter.

This is why I know that my progress is stopped due to my rudimentary setup and equipment, and NOT because of the science. The literature is there to back the effects of US on collagen.


Period 1: 06/08/2020 BPFSL: 22cm (8.66") BPEL: 22cm (8.66") EG: 15.8cm (6.25") => 09/07/2020 BPFSL: 23.9cm (9.40")

Period 2: 05/01/2021 BPFSL: 24cm (9.44") BPEL: 22cm (8.66") EG: 15.8cm (6.25") => 07/24/2021 BPFSL: 25.4cm (10.00") BPEL: 23.5cm (9.25")

Goal: 1 Foot x 7.5 Inches (30.48cm x 19.05cm) NBPEL

Sign of progress

Today experimental therapy yielded some positive signs, perhaps indicator of progress.

Since yesterday test in which I believe to have found the cause of my stall to be in temperature due to acoustic issues, I did the following experiment today.

First, I tested an old vacuum cup that I used to wear some 10-12 years ago. As my girth grew up too much and the size of my glans too, this cup now covers only 3/4 of the glans and very tight. However, the purpose of this experiment was to expose as much penis as possible with as little interruption as possible. To the cup I added a short sleeve to keep it in place and in vacuum, but again, short enough to expose as much penis as possible.

Second, I only used 1 transducer. I found yesterday in my test while measuring temperature that at the high setting temperature went up TOO FAST and TOO HIGH. So much that the burning became intense as the thermometer register 41+ degrees celsius in less than a minute and even caused systemic effects. While testing I realized that the medium setting is much more stable and keep a much better pace at elevating temperature.

Keep in mind, all this time I have been using 2 transducers at the same time next to each other in order to cover a bigger area of the penis. However, during previous temperature tests, I struggled to pass 38 degrees, and never really felt a strong burn as a consequence of high temperature or rapid raise of it. That fact made me hypothesize that I have been having an acoustic problem interfering with sound waves and therefore temperature stability. Were does that come from? too early to tell. The fact is, the problem seems to be resolved by minimizing area covered of the penis plus using only one transducer.

With that setup, I performed a semi full therapy today consisting of 25 mins of stress relaxation from 1kg to 2.5kg, followed by 25 mins of US relaxing up to 3.5kg. I kept the weight a little less than usual, and did not do any manual stretching or exercise. Therefore “semi” full therapy. The purpose of today was mostly measure pure US results under these experimental variations.

As a result:

Pre BPFSL: 23cm
Post BPFSL: 23.8cm
Strain: 3.4%

Before measuring post BPFSL I am squeezing as much fluid buildup off the glans in order to achieve a more accurate reading.

From here my intention is to do another therapy tomorrow extending US to 30 minutes and relaxing to 4-4.5kg and assess results.

Although the strain of today is positive, it is too early to tell if I have finally found a solution for my plateau. Only 1-2 cycles will give a better perception, but I am optimistic that I will start gaining again.


Period 1: 06/08/2020 BPFSL: 22cm (8.66") BPEL: 22cm (8.66") EG: 15.8cm (6.25") => 09/07/2020 BPFSL: 23.9cm (9.40")

Period 2: 05/01/2021 BPFSL: 24cm (9.44") BPEL: 22cm (8.66") EG: 15.8cm (6.25") => 07/24/2021 BPFSL: 25.4cm (10.00") BPEL: 23.5cm (9.25")

Goal: 1 Foot x 7.5 Inches (30.48cm x 19.05cm) NBPEL

Originally Posted by igigi
Sign of progress

Today experimental therapy yielded some positive signs, perhaps indicator of progress.

Since yesterday test in which I believe to have found the cause of my stall to be in temperature due to acoustic issues, I did the following experiment today.

First, I tested an old vacuum cup that I used to wear some 10-12 years ago. As my girth grew up too much and the size of my glans too, this cup now covers only 3/4 of the glans and very tight. However, the purpose of this experiment was to expose as much penis as possible with as little interruption as possible. To the cup I added a short sleeve to keep it in place and in vacuum, but again, short enough to expose as much penis as possible.

Second, I only used 1 transducer. I found yesterday in my test while measuring temperature that at the high setting temperature went up TOO FAST and TOO HIGH. So much that the burning became intense as the thermometer register 41+ degrees celsius in less than a minute and even caused systemic effects. While testing I realized that the medium setting is much more stable and keep a much better pace at elevating temperature.

Keep in mind, all this time I have been using 2 transducers at the same time next to each other in order to cover a bigger area of the penis. However, during previous temperature tests, I struggled to pass 38 degrees, and never really felt a strong burn as a consequence of high temperature or rapid raise of it. That fact made me hypothesize that I have been having an acoustic problem interfering with sound waves and therefore temperature stability. Were does that come from? too early to tell. The fact is, the problem seems to be resolved by minimizing area covered of the penis plus using only one transducer.

With that setup, I performed a semi full therapy today consisting of 25 mins of stress relaxation from 1kg to 2.5kg, followed by 25 mins of US relaxing up to 3.5kg. I kept the weight a little less than usual, and did not do any manual stretching or exercise. Therefore “semi” full therapy. The purpose of today was mostly measure pure US results under these experimental variations.

As a result:

Pre BPFSL: 23cm
Post BPFSL: 23.8cm
Strain: 3.4%

Before measuring post BPFSL I am squeezing as much fluid buildup off the glans in order to achieve a more accurate reading.

From here my intention is to do another therapy tomorrow extending US to 30 minutes and relaxing to 4-4.5kg and assess results.

Although the strain of today is positive, it is too early to tell if I have finally found a solution for my plateau. Only 1-2 cycles will give a better perception, but I am optimistic that I will start gaining again.

Possibly destructive interference? They are sound waves after all.

Best of luck!


There is no try, just do...

Originally Posted by igigi

Keep in mind, all this time I have been using 2 transducers at the same time next to each other in order to cover a bigger area of the penis. However, during previous temperature tests, I struggled to pass 38 degrees, and never really felt a strong burn as a consequence of high temperature or rapid raise of it. That fact made me hypothesize that I have been having an acoustic problem interfering with sound waves and therefore temperature stability. Were does that come from? too early to tell. The fact is, the problem seems to be resolved by minimizing area covered of the penis plus using only one transducer.

That is something I never experienced. So most probably NOT the soundwaves cancelling each other unless they are opposed or in a large enough angle between them. I think I have done enough hours to be sure of.

There can be a thing never came in my mind before, the transducer coils are causing inductance (EMI) messing up each others electronics.

I am not experiencing this at all, but there is a one major difference in the setup. Instead of using original separate AC/DC converters, I have assembled sole more powerful voltage source feeding both of them. This was only because the mess with the cables and more than that the need for using the 110/230V (euro) adapters with the original setup.

Now that they are fed by the same converter circuit can be the thing not experiencing the disturbances.
After all you can find clearance distances recommended for electrical equipment in the US PRO manual .


START 18/13.15 cm Jul 24th 18 (7.09/5.18") NOW 22.5/15.2 cm Fer 12th 20 (8.86/5.98") GOAL 8.5"/ 6"

When connective tissue is stretched within therapeutic temperatures ranging 102 to 110 F (38.9- 43.3 C), the amount of structural weakening produced by a given amount of tissue elongation varies inversely with the temperature. This is apparently related to the progressive increase in the viscous flow properties of the collagenous tissue when it is heated. (Warren et al (1971,1976)

Thank you guys.

The good news is, during the test yesterday I kept the thermometer between penis and leg half way the shaft, and temperature stay steady. As I move the transducer around temp goes down 0.2-.0.3 degrees but as I pass over that area it goes up 0.5-0.7. So it keeps a steady increase. After some 10-15 minutes I reached 40+ and the fluctuation stayed at 40.5-40.7 at Medium setting. That is why today I will try 30 minutes of US in order to profit from full 15-20 minutes at 40+ degrees.


Period 1: 06/08/2020 BPFSL: 22cm (8.66") BPEL: 22cm (8.66") EG: 15.8cm (6.25") => 09/07/2020 BPFSL: 23.9cm (9.40")

Period 2: 05/01/2021 BPFSL: 24cm (9.44") BPEL: 22cm (8.66") EG: 15.8cm (6.25") => 07/24/2021 BPFSL: 25.4cm (10.00") BPEL: 23.5cm (9.25")

Goal: 1 Foot x 7.5 Inches (30.48cm x 19.05cm) NBPEL

More signs of progress

Following the modifications tested yesterday, today I extended the US portion of the protocol to 30 minutes. Measuring temperature constantly, it took 10 minutes (+/- 30 seconds) to reach 40 degrees celsius (104 degrees Fahrenheit) That means I applied US at target temperature for 20 minutes.

Relaxation continued during US from 2.5kg to 4.5kg.

15 minutes of cool down.

Results are:

Pre BPFSL: 23.3cm
Post BPFSL: 24cm
Strain: 3.0%

This was exciting since i only reached 24cm one time before. As before, I squeezed as much fluid as I could from the glans, and measure multiple times to ensure an accurate reading as much as possible.

If I am able to pass 24cm tomorrow or during the next cycle, it will be a clear indication that I have found the cause of my plateau and is resolved. I am inclined to believe so.

At this point I am not considering to add manual exercises as part of the protocol. If it aint broken, why fix it. As long as I can keep making progress I will maintain the protocol and depending on progress I will schedule a recon accordingly.


Period 1: 06/08/2020 BPFSL: 22cm (8.66") BPEL: 22cm (8.66") EG: 15.8cm (6.25") => 09/07/2020 BPFSL: 23.9cm (9.40")

Period 2: 05/01/2021 BPFSL: 24cm (9.44") BPEL: 22cm (8.66") EG: 15.8cm (6.25") => 07/24/2021 BPFSL: 25.4cm (10.00") BPEL: 23.5cm (9.25")

Goal: 1 Foot x 7.5 Inches (30.48cm x 19.05cm) NBPEL

Promising progress.

Todays results:

Pre BPFSL: 23.4 cm
Post BPFSL: 24.2 cm
Strain: 3.4%

This is certainly the longest I have ever stretched, but as this process is, too early to celebrate. This is the last day of this 3 day cycle. Will rest for the next 2 following days. Next cycle will be determinant to see if I was able to break this plateau or not. As of today it seems like, but still too early to tell.


Period 1: 06/08/2020 BPFSL: 22cm (8.66") BPEL: 22cm (8.66") EG: 15.8cm (6.25") => 09/07/2020 BPFSL: 23.9cm (9.40")

Period 2: 05/01/2021 BPFSL: 24cm (9.44") BPEL: 22cm (8.66") EG: 15.8cm (6.25") => 07/24/2021 BPFSL: 25.4cm (10.00") BPEL: 23.5cm (9.25")

Goal: 1 Foot x 7.5 Inches (30.48cm x 19.05cm) NBPEL

Originally Posted by igigi
Promising progress.

Todays results:

Pre BPFSL: 23.4 cm
Post BPFSL: 24.2 cm
Strain: 3.4%

This is certainly the longest I have ever stretched, but as this process is, too early to celebrate. This is the last day of this 3 day cycle. Will rest for the next 2 following days. Next cycle will be determinant to see if I was able to break this plateau or not. As of today it seems like, but still too early to tell.


Vacuum cup. Shortened sleeve. Is tension provided by hanging weights or extending?

Originally Posted by djrobins
Vacuum cup. Shortened sleeve. Is tension provided by hanging weights or extending?

Extending with a bungee cord.


Period 1: 06/08/2020 BPFSL: 22cm (8.66") BPEL: 22cm (8.66") EG: 15.8cm (6.25") => 09/07/2020 BPFSL: 23.9cm (9.40")

Period 2: 05/01/2021 BPFSL: 24cm (9.44") BPEL: 22cm (8.66") EG: 15.8cm (6.25") => 07/24/2021 BPFSL: 25.4cm (10.00") BPEL: 23.5cm (9.25")

Goal: 1 Foot x 7.5 Inches (30.48cm x 19.05cm) NBPEL

Originally Posted by igigi
Extending with a bungee cord.

You have a “hanging scale” inline with the bungee cord to measure the tension?

Can you describe your US heating process in a little more detail? It’s still not clear to me.


Last edited by djrobins : 08-11-2020 at .

Originally Posted by djrobins
You have a “hanging scale” inline with the bungee cord to measure the tension?

Can you describe your US heating process in a little more detail? It’s still not clear to me.

Yes I have a fishing scale between the vacuum cup and the bungee cord to measure tension.

The US heating as I am doing it right now is just applying plenty of gel, then start at medium setting dong circular motion from base to top evenly. It takes some 10 minutes to reach target temperature. I am keeping a thermometer half way the shaft and measuring every 2-3 minutes. Also since I have a 1mhz transducer, I rest my penis on my leg twisted, leaving the dorsal side against my leg. That means I am applying the US on the ventral side. Since the 1mhz US heats a little deeper, it is targeting directly the Septum on the other side. When I measure temperature, I make sure I hols the thermometer against the septum in order to get an accurate reading. Under tension the septum get very hard and sticking out on the surface so its easy to feel with the thermometer. While I am applying US I am still relaxing from 2.5kg to 4.5kg in that span of 35 minutes. 10 minutes increasing temperature, 25 minutes at target temperature. Followed by 15 minutes of cool down at the same tension.


Period 1: 06/08/2020 BPFSL: 22cm (8.66") BPEL: 22cm (8.66") EG: 15.8cm (6.25") => 09/07/2020 BPFSL: 23.9cm (9.40")

Period 2: 05/01/2021 BPFSL: 24cm (9.44") BPEL: 22cm (8.66") EG: 15.8cm (6.25") => 07/24/2021 BPFSL: 25.4cm (10.00") BPEL: 23.5cm (9.25")

Goal: 1 Foot x 7.5 Inches (30.48cm x 19.05cm) NBPEL

I measured today BPFSL at 23.5cm to see what would be my “Pre” if I did a therapy today. However, I will stick to the plan and take today and tomorrow off, returning to next cycle on Wednesday. I am curious to see how much I will retain after these 2 days of rest.

By the way, I received my new vacuum cup, but this old little one is working pretty well. The sleeve is much needed. I will test the new one and see how it goes.


Period 1: 06/08/2020 BPFSL: 22cm (8.66") BPEL: 22cm (8.66") EG: 15.8cm (6.25") => 09/07/2020 BPFSL: 23.9cm (9.40")

Period 2: 05/01/2021 BPFSL: 24cm (9.44") BPEL: 22cm (8.66") EG: 15.8cm (6.25") => 07/24/2021 BPFSL: 25.4cm (10.00") BPEL: 23.5cm (9.25")

Goal: 1 Foot x 7.5 Inches (30.48cm x 19.05cm) NBPEL

Starting new cycle, and very happy to see these results.

Pre BPFSL: 23.5cm
Post BPFSL: 24.3cm
Strain: 3.4%

Length stayed steady at 23.5cm, and this is the 3rd consecutive therapy that I end at 24+ cm. I believe it is safe to say that I have resolved the issue that was holding me back and it was indeed a temperature problem caused by acoustic interference between the 2 transducers affecting the sound waves.

Now I am about 6 centimeters away to stretch up to 1 foot of phallic apparatus.


Period 1: 06/08/2020 BPFSL: 22cm (8.66") BPEL: 22cm (8.66") EG: 15.8cm (6.25") => 09/07/2020 BPFSL: 23.9cm (9.40")

Period 2: 05/01/2021 BPFSL: 24cm (9.44") BPEL: 22cm (8.66") EG: 15.8cm (6.25") => 07/24/2021 BPFSL: 25.4cm (10.00") BPEL: 23.5cm (9.25")

Goal: 1 Foot x 7.5 Inches (30.48cm x 19.05cm) NBPEL

Today results

Pre BPFSL: 23.6cm
Post BPFSL: 24.5cm
Strain 3.8%

During the therapy today, I thought about giving it a try again to the 2 transducers at the same time. While exercising I was processing what I was doing before, trying to find the cause of the issue, it might be from having the 2 transducers to close with each other even making contact at some point. I will acquire a more professional thermometer with multiple thermocouples to measure simultaneously at 4 different point constantly. Then I will draw with a marker a line in the middle of the shaft in order to determine each transducer area. Then I will use both at the same time, but separate from each other at the same distance at all times. In other words, they both will do the same at the same time the whole time. While one is heating the top portion go the top half, the other will be heating the top portion of the bottom half and so on. That way I will keep the maximum distance from each other at all times. The constant multiple temperature measuring points will give me an accurate information in real time about whats going on down there.

With this old vacuum cup, unexpectedly, things have worked marvelous. It is tiny, tight, strong enough, and expose virtually the whole shaft under the glans. While heating up I am really noticing a visual difference with the extra expansion of the tissues.


Period 1: 06/08/2020 BPFSL: 22cm (8.66") BPEL: 22cm (8.66") EG: 15.8cm (6.25") => 09/07/2020 BPFSL: 23.9cm (9.40")

Period 2: 05/01/2021 BPFSL: 24cm (9.44") BPEL: 22cm (8.66") EG: 15.8cm (6.25") => 07/24/2021 BPFSL: 25.4cm (10.00") BPEL: 23.5cm (9.25")

Goal: 1 Foot x 7.5 Inches (30.48cm x 19.05cm) NBPEL

Originally Posted by igigi
Starting new cycle, and very happy to see these results.

Pre BPFSL: 23.5cm
Post BPFSL: 24.3cm
Strain: 3.4%

Length stayed steady at 23.5cm, and this is the 3rd consecutive therapy that I end at 24+ cm. I believe it is safe to say that I have resolved the issue that was holding me back and it was indeed a temperature problem caused by acoustic interference between the 2 transducers affecting the sound waves.

Now I am about 6 centimeters away to stretch up to 1 foot of phallic apparatus.

Having the experience with dual transducer setup , I still believe that the interfererence is not about acoustic cancellation inside the shaft, more likely it is the inductive intreference of the transducers themselves. Anyways keeping the transducers apart enough has solved your issue.
You could try to shield the transducer heads with some insulating shield material.

Great results you are having. It is safe to say the basics of the concept are quite convincing.


START 18/13.15 cm Jul 24th 18 (7.09/5.18") NOW 22.5/15.2 cm Fer 12th 20 (8.86/5.98") GOAL 8.5"/ 6"

When connective tissue is stretched within therapeutic temperatures ranging 102 to 110 F (38.9- 43.3 C), the amount of structural weakening produced by a given amount of tissue elongation varies inversely with the temperature. This is apparently related to the progressive increase in the viscous flow properties of the collagenous tissue when it is heated. (Warren et al (1971,1976)

Top

All times are GMT. The time now is 02:51 PM.