Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Reflections and Progress: thoughtfulgold

Birth of the "Plateau Breaker"

This was assembled by request. Complete with cushioned tubes, all metal fittings and thick tubing with video instructional videos and verification of function and calibrations as well as PDF routines and Tips on complimentary flash drive.

I made it much more efficient and clean than my last system. Almost want to keep it myself. Almost.

The First Plateau Breaker.webp
(759.7 KB, 163 views)

Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

Originally Posted by thoughtfulgold
This was assembled by request. Complete with cushioned tubes, all metal fittings and thick tubing with video instructional videos and verification of function and calibrations as well as PDF routines and Tips on complimentary flash drive.

I made it much more efficient and clean than my last system. Almost want to keep it myself. Almost.

Very nice TG, well done Sir!


Once upon a time (2015): 6.40” x 4.50”

Today: 7.25” x 5.00”, Thunder Cocks Unite!

I think we can...Little Engine’s Climb

Originally Posted by thoughtfulgold
This was assembled by request. Complete with cushioned tubes, all metal fittings and thick tubing with video instructional videos and verification of function and calibrations as well as PDF routines and Tips on complimentary flash drive.

I made it much more efficient and clean than my last system. Almost want to keep it myself. Almost.

I imagine there would be a market for that. Looks real good.

Originally Posted by Buckfever
I imagine there would be a market for that. Looks real good.

He sought me out and we worked out a deal. It took me a while to build, calibrate and shoot video for because I have a day job and a life but he was quite patient. Maybe others will seek such a good from me. Who knows?

Originally Posted by LittleEngine
Very nice TG, well done Sir!

Thank you sir!


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

I’m impressed by the level of polish. I thought it would be more cumbersome and have less of a clean look.


Start 11/30/17: 6” BPEL, 4.25" MSEG - My Progress Report

Latest 1/29/20: 7" BPEL, 4.75" MSEG - My Progress Photos

Originally Posted by thoughtfulgold
This was assembled by request. Complete with cushioned tubes, all metal fittings and thick tubing with video instructional videos and verification of function and calibrations as well as PDF routines and Tips on complimentary flash drive.

I made it much more efficient and clean than my last system. Almost want to keep it myself. Almost.


Looks clean af. But what makes it different from a regular pump, just curious? Or you just wanted a homemade pump?


Start Jul 2016 - 4.5 BPEL x 4.25 MSEG.

Peak - 6.6 BPEL x 5.13 MSEG

Originally Posted by lifestyle
I’m impressed by the level of polish. I thought it would be more cumbersome and have less of a clean look.

My first device was cumbersome. As I used it and understood what upgrades and changes would make it more streamlined and clean this was born. Some input from others and a bit of research on my own created the “Plateau Breaker” and I’m proud of it.

Thank you for the compliment, sir.


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

Originally Posted by dsdany606
Looks clean af. But what makes it different from a regular pump, just curious? Or you just wanted a homemade pump?

It goes from 4.5HG to over 25HG in about 2 seconds. That’s the main difference. How it does that and how it’s controlled is why it’s a special order. It’s used for a special style of high pressure pumping called PE4F pumping.

I built mine originally for that purpose.


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

How much do you think it would cost me for that, plus delivery in the UK? I’m only asking now, I want to start pumping next summer actually…

Originally Posted by train spot
How much do you think it would cost me for that, plus delivery in the UK? I’m only asking now, I want to start pumping next summer actually…

I can’t say because international shipping is nuts and Customs holds things up for months. Send me a Personal Message if you are actually interested in making an arrangement.


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

TG, what is the difference between PE4F and Incremental Routine as far as gaining concerned ? Do you feel that one is superior to the other ?


PhoenixNow Progress Reports

Started August 2018: BPEL/MEG 5.7" x 5" - Now: 6.1" x 5.25" BEG: 6.25"

Goal: BPEL/MEG 8.5" x 6.5"

PE4F High Pressure Pumping vs. Regular incremental pumping at medium/low pressures

Originally Posted by PhoenixNow
TG, what is the difference between PE4F and Incremental Routine as far as gaining concerned ? Do you feel that one is superior to the other ?

To be honest that is going to vary on the individual.

As far as an absolute value? I would say high pressure pumping has greater potential for longer periods when utilized. Strictly an opinion and I’ll tell you why.

It is strictly theoretical for me to say that high pressure pumping has greater potential and it is a biased opinion because comparing the gains I’ve seen in 11 months versus the gains I saw in 3 years I like the rate of the gains from high pressure pumping thus far. Additionally it is geometrically biased. For me to talk about the .15” girth gains e that I have seen in this year I would have to talk about the fact that based on my current size .15” is a greater cubic volume gain then some of the gains rates I had in the past with incremental pumping. So less absolute measurement gain can still transmit to more cubic volume gain because of my current proportions which creates a bias.

The truth remains that the biggest problem with any kind of pumping is that the person doing it is going to be the biggest Factor. Regardless of the pumping style you choose if you implement the methods incorrectly neither method will help you gain and both will toughen your penis. And no one I have seen who pumps has been equally efficient in both methods if they have tried both methods. They will prefer one over the other and they will be better at one than the other. That level of Competency will offset any absolute value or edge either style of pumping could in theory have or give you.

So no matter what happens it would be apples and oranges when you compare them. At the end of the day it becomes “Ford vs. Chevy”


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

Originally Posted by thoughtfulgold
To be honest that is going to vary on the individual.

As far as an absolute value? I would say high pressure pumping has greater potential for longer periods when utilized. Strictly an opinion and I’ll tell you why.

It is strictly theoretical for me to say that high pressure pumping has greater potential and it is a biased opinion because comparing the gains I’ve seen in 11 months versus the gains I saw in 3 years I like the rate of the gains from high pressure pumping thus far. Additionally it is geometrically biased. For me to talk about the .15” girth gains e that I have seen in this year I would have to talk about the fact that based on my current size .15” is a greater cubic volume gain then some of the gains rates I had in the past with incremental pumping. So less absolute measurement gain can still transmit to more cubic volume gain because of my current proportions which creates a bias.

The truth remains that the biggest problem with any kind of pumping is that the person doing it is going to be the biggest Factor. Regardless of the pumping style you choose if you implement the methods incorrectly neither method will help you gain and both will toughen your penis. And no one I have seen who pumps has been equally efficient in both methods if they have tried both methods. They will prefer one over the other and they will be better at one than the other. That level of Competency will offset any absolute value or edge either style of pumping could in theory have or give you.

So no matter what happens it would be apples and oranges when you compare them. At the end of the day it becomes “Ford vs. Chevy”

Makes total sense. I think I’ll continue on incremental for now as it seems safer.


PhoenixNow Progress Reports

Started August 2018: BPEL/MEG 5.7" x 5" - Now: 6.1" x 5.25" BEG: 6.25"

Goal: BPEL/MEG 8.5" x 6.5"

Originally Posted by PhoenixNow
Makes total sense. I think I’ll continue on incremental for now as it seems safer.

It is definitely safer. The chance of injury with miscalculation is far lower.

But what you’re comfortable with and good at is what counts for the most. Remember that. Whatever it is.


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

Hey TG, you’ve been at it for a long time with girth work and girth devices, you could be considered a pioneer, lol:) )

Always wanted to ask but I kept forgetting, have you ever injured yourself?

I mean like injury while doing your routine, I read about your lamp injury burning your skin, I mean like an actual jelqing/clamping/pumping injury..?

Top

All times are GMT. The time now is 04:50 PM.