Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Hanging with FIRe

Thread Closed

Originally Posted by scienceguy
Thermometer for Adults, No Touch Forehead Digital Thermometer, Infrared Thermometer for Baby Kids with High Temperature Alarm and Instant Accurate Reading for Indoor and Outdoor Use https://www.ama … /dp/B086HRFHQH/

That is what I used. The body temperature reading is what I used not the surface temperature. As I said before when I tested on my penis the internal temperature was usually 3 degrees higher than the surface reading.

It has serious limitations I agree, not sure how deep the body temperature is measured at and it is tested on foreheads not dicks, to mention a few.

If you try that or a similar gun and compare with the method you did I would love to know how close it is. As things are currently working for me I don’t think I’ll be putting a temperature probe up my urethra yet 🙂

How do you take the temp with the pad on? Just move and shoot real quick?

Originally Posted by StrangerComeKno
How do you take the temp with the pad on? Just move and shoot real quick?

Yeah take the pad off, put of the way and then shoot and pad back on as quick as possible then

From the thermedic website. https://www.the … com/technology/
I’m beginning to believe that there is something accurate about their claims of heat penetration. Maybe not the 4-7cm they claim below, but it appears to be enough to trigger some remodeling.

Quote
Cabric Inside

Far Infrared Technology – More than 15 years of experience in the field of carbon materials have led to the development of Cabric®, a carbon fiber fabric with the ability to emit FIR (far infrared) energy. Thermedic’s state of the art production facilities in combination with highest quality standards make this fabric a unique base material for a variety of different applications, including medical and hot and cold therapy.

Compared to conventional heating pads which only produce “surface heat”, the Thermedic Far Infrared product line uses the superior far infrared (FIR) technology. FIR is a scientifically proven form of heat therapy that works more efficiently and effectively than traditional heating techniques. Whether you have a sports injury or chronic pain, our pads and braces are more effective than others. Far infrared is a completely safe form of thermal radiation, as it does not emit harmful Electromagnetic Frequencies (EMF) like most other electronic heating products. Unlike conventional heating technology which uses metal wires as heating elements, the unique Thermedic heat therapy technology uses Cabric®, a carbon fiber fabric which in itself is electrically conductive and therefore does not use any wires. The fabric naturally emits infrared energy which supports various therapeutic applications. No matter if you are suffering from acute or chronic pain or just use it for preventive therapy, Thermedic’s extensive product line of hot and cold therapy braces and pads is the right choice.

How does it work?

FIR is absorbed by the human body through “resonance absorption”. FIR energy occurs within the same wavelengths as
the molecules of the human body. Therefore it corresponds with the human body at the same resonance level. FIR energy travels in straight lines and is easily absorbed by the human body, reaching as far as 4-7 cm into muscle tissue. FIR heat reaches inside the body, not just on the surface. Due to this effective healing of sports injuries, our hot and cold therapy product is known as the “professional triple cold hot protector” for some swimmers.
FIR energy improves blood circulation in the affected area. This improves your body’s ability to remove waste, such as dormant cells and lactic acid, from muscle fibers, significantly improving your ability to recover from a sports injury. Upon entering the human body FIR energy causes a warming effect by activating molecules and body cells. FIR energy activates the cells, increases blood vessel resilience and promotes cellular functioning. Best of all, FIR energy provides fast, effective pain relief to sore muscles and joints.


BPEL: 5.5" --> 7.9" ; BPFSL: ~5.6" --> 8.5"

Progress log summary: Hanging with FIRe

"Going hard, fast and heavy is all against the scientific knowledge of tissue expansion or elongation." - Kyrpa

Originally Posted by scienceguy
I used an infra red heat gun to measure internal temperature and can confirm the pad heated my dick to 42 degrees, it fluctuated slightly below and slightly above. Not sure if it is really FIR but it works for me. On BPEL I gained 0.9cm in my first cycle, 1.1cm in my second cycle and I am in the middle of my third cycle and I have gained 0.5cm so far.

I found the pad I got from Amazon to heat better than the totalman pad when measured with the temperature gun. It heated about 0.5 degrees warmer.

nice, I might get that one then

Originally Posted by 5.5Squared
From the thermedic website. https://www.the … com/technology/
I’m beginning to believe that there is something accurate about their claims of heat penetration. Maybe not the 4-7cm they claim below, but it appears to be enough to trigger some remodeling.

Yeah and that is one zone heating into the body from one angle. When you consider the pad is wrapped around the penis therefore the heat is coming in from all angles it really only needs to penetrate a cm or so from each point

I was not inactive and ordered the necessary equipment.
The IR thermometer will only arrive on 7th or 8th february but I wanted to make sure I order the exact same scienceguy has.
Most seem to be quite unreliable and I want to exclude potential sources of error.
I will start with the IR pad when the thermometer has arrived.
The heating pad SG uses is already here.
In terms of cutting it to fit my penis, I shot two pictures in the attachment of this post (may take some time until the attachment gets approved by a moderator).
I dont want to cut it in a suboptimal way because then I may have to order another one.
My idea was:
1) cut the straight red line and remove one strap.Then, use the velcro in the circle (backside of the pad) to fixate the pad on my penis. Or should I also cut the other strap right behind the pocket for the battery? But how can I fixate the pad on my penis then ( without the velcro)?
2) it should look like attachment 2 where the tube simulates my penis. How tight do you guys roll it?

I will also hang straight out with a pulley, so that should work :-) .

cut1.webp
(205.1 KB, 144 views)
cut3.webp
(90.8 KB, 159 views)

[before PE] Start BPFSL: 17.6cm (6.93 inches) start BPEL: 16.7cm (6.57 inches)

[currently decon until aug 2024] latest BFPSL: 21.2cm (8.35 inches) latest BPEL: 19.5cm (7,68 inches) latest NBPEL: 17cm (6.69 inches)

Click here to see my amazing US progress report (always updated!Kyrpa's methodology) ;-)

Originally Posted by CBateman
I was not inactive and ordered the necessary equipment.

I have also ordered an IR thermometer, though a different brand. I also will be testing it on a NIR lamp while hanging on a fulcrum, so a slightly different setup, but more information on here the better. I was thinking on ways we can check calibration, such as checking the the boiling point of water at sea level (100C). However there is potential for a misreading if emissivity is calibrated for different materials (eg skin).

Edit: Skin has an emissivity of 0.98 and water is around 0.95 - so results should not differ drastically.

Originally Posted by CBateman
I was not inactive and ordered the necessary equipment.
The IR thermometer will only arrive on 7th or 8th february but I wanted to make sure I order the exact same scienceguy has.
Most seem to be quite unreliable and I want to exclude potential sources of error.
I will start with the IR pad when the thermometer has arrived.
The heating pad SG uses is already here.
In terms of cutting it to fit my penis, I shot two pictures in the attachment of this post (may take some time until the attachment gets approved by a moderator).
I dont want to cut it in a suboptimal way because then I may have to order another one.
My idea was:
1) cut the straight red line and remove one strap.Then, use the velcro in the circle (backside of the pad) to fixate the pad on my penis. Or should I also cut the other strap right behind the pocket for the battery? But how can I fixate the pad on my penis then ( without the velcro)?
2) it should look like attachment 2 where the tube simulates my penis. How tight do you guys roll it?

I will also hang straight out with a pulley, so that should work :-) .

I made one cut at the same spot as the red line on the right, just outside the stitching obviously. I made my other cut just past the battery holder, again just outside the stitching. While hanging i have the battery out of the holder sitting on my chair. I use the velcro from the battery holder to velcro the pad in place around my penis. I have a velcro strap that I made that can hold it tighter but didn’t need it yet.

In terms of how tight to your penis just see what works. I don’t have it too tight but then again it is against my naked penis. Might try a cloth in between my penis and pad and attach it tighter, see how that affects temperature, haven’t tried it yet as my approach is working.

Originally Posted by 5.5Squared
From the thermedic website. https://www.the … com/technology/
I’m beginning to believe that there is something accurate about their claims of heat penetration. Maybe not the 4-7cm they claim below, but it appears to be enough to trigger some remodeling.

I’m not sure if I totally believe their claims especially this part.

"technology uses Cabric®, a carbon fiber fabric which in itself is electrically conductive and therefore does not use any wires."

I’m almost positive mine has wires in it. I’ll try to take some pictures. Maybe there is a some major quality control issues and I got one that doesn’t work too well or has a flas in the design.

Here’s an image of my TherMedic pad and I see three wires running to each section of pad it looks like.

20220127_085054.webp
(718.1 KB, 351 views)

I believe a rice sock can hold heat for 30 minutes. So why not just use a rice sock around the shaft??


Currently at 8.125 BPEL and 6.25 Girth

Originally Posted by gomitadelimon
I believe a rice sock can hold heat for 30 minutes. So why not just use a rice sock around the shaft??

It doesnt hold enough, you must reach 41ºC for a while

A rice sock emits radiant heat, which is different than infrared heat. Infrared penetrates better.

Here’s an article describing the differences in radiant vs. infrared home heating systems. Not an exact comparison but does give you some understanding of the differences.

What Is The Difference Between Infrared And Radiant Heat - HouseholdAir


Initial: 7” BPEL; 6” NBPEL; 5.25” - 5.5” MEG

Current: 7-7/8” BPEL; 7-3/8” NBPEL; 8.5” BPFSL; 6.5” MEG; 6”x5” Flaccid.

Goal: Improved/consistent EQ while managing ED. Secondary: maintain current stats.

Originally Posted by Jguido
I’m not sure if I totally believe their claims especially this part.

“technology uses Cabric®, a carbon fiber fabric which in itself is electrically conductive and therefore does not use any wires.”

I’m almost positive mine has wires in it. I’ll try to take some pictures. Maybe there is a some major quality control issues and I got one that doesn’t work too well or has a flas in the design.

I’m just going to say that you missed their point. I’m sure that SG will be along to explain nichrome resistance based heating pads.


BPEL: 5.5" --> 7.9" ; BPFSL: ~5.6" --> 8.5"

Progress log summary: Hanging with FIRe

"Going hard, fast and heavy is all against the scientific knowledge of tissue expansion or elongation." - Kyrpa

Ill google that to try and learn more.

From what I’ve read this morning it seems like infrared heats differently based on the material its heating. So testing with a cooking thermometer isn’t going to show the same temperature as it would if it was heating something like the penis.

Top
Thread Closed

All times are GMT. The time now is 11:08 AM.