Oh looky here! The CCH3.

If you didn’t cut out the windows, you would end up with a CCH2. Definitely not as comfortable. That’s why CCH3 was made.

You don’t need to wrap at all with these gripper pad surfaces. But you’ll need to position it closer to the base so it can grab more skin. Remember a wrap does 3 things: firm up the internal structures so the hanger can use them as a hold, protect your skin against the hanger surface ( which is not needed in the CCH3 ), and is used as added material for the hanger to hold onto.

If you didn’t cut out the windows, you would end up with the rigid flat surface of both pillars flattening your shaft ONLY in a cross-ways fashion ( a CCH2 ).

If you used the reinforcement on the gripper pads, you would end up with the rigid flat surface of both pillars in a cross-ways AND lenthwise fashion. This is much more comfortable since more square inch of your shaft surface is flattened to take the weight. Imagine flattening a sausage cross-ways between 2 pipes. Now imagine flattening that sausage cross-ways between 2 square rods. The square rods can flatten more surface area. When you use reinforcement in the CCH3, your dick sees not 2 round pillars, but 2 square-shaped pillars.

If you cut out the windows and did not use reinforcement, this would provide the best comfort, since the surfaces are not perfectly flat but actually concave-in to the contours of your shaft. Check out bigflip’s post, #71 in page 5 of this thread, where he specifically talks about it conforming to the shape of your dick.

The reason that I used reinforment is to prevent this concaving thing from happening and just to see how it feels, not because I had a lack of comfort. Some of us who are used to the flat surfaces of a classic AFB hanger may actually prefer this.

Since I did fine without the reinforement and felt a little sore after 2 days with it, I’ll take out the reinforement today.

How’s YOUR CCH3 coming along, inamo? ;)

You could heat a steel rod and press the “unwindowed” tubes against it so it makes a perfect shape. Or similarly put vaseline on a tube and put silicon on the CCH3 then press it against the silicon so it shapes against the tube. You may want to cut small holes in the tube so the silicon can seep through and get a good grip.

Or get the wifes curling tongs, cover in tinfoil and use it same as the heated rod

This heated rod theory is not as simple as it sounds. You still want pressure on the sides of your shaft so this “hole” you are trying to make must not be perfectly round.

The gripper pad method I chose seems to be the easiest, most accessible and accurate for most guys. It’s great if something fancier works for you and I applaud you for willing to take the time to do it. A lot of guys here who are not very craft adept will squirm and blanch at the thought of making something that looks complicated even if it is for their one and only beloved penis.

I regret to say that havent bought the pipe yet, I bought a cutting blade for my die grinder so I can cut the windows easier. All this school and work have really made me incredebly lazy.

Well, you don’t have to go through all that trouble. It only takes 10 min. to drill tiny holes along the border of a window and then 2 min. to cut through those holes and bevel out the long edges of the window.

If you already have all the parts, it only takes 30 min. to make a CCH3.

>If you already have all the parts, it only takes 30 min. to make a CCH3.<

I regret to say it took me like 10 hours to make mine. But then again I am horrible with tools, but it sure is a nifty little device and I must give you lots of credit for the design. Good job cc.

Thanks, remek.

Looking forward to your progress report :)

Hanging and the combination of girth blaster jelqs should get me more good gains like I have had.

the CCH3 is my first hanger, and I like it and its unique design, however I am going to spend another 10 hours and build the wench so I can compare the two and see which one is really better :D .

But I must say, once I get past 2 lbs and make it up to 4 I will be in great shape. I think I am going to use some wrap because the skin stretch is to much for me.

So you’ve been using this without a wrap? When you decide to use one, this is the one I use. It’s a thin foam wrap that clings onto itself. I use about 15" of it.

Ace Sports Underwrap, 3-Inch - 1ea - Medshopexpress

Hi remek

I started hanging 5lbs. with the Captain Wench and was comfortable. It took a longer time to set up.

Being comfortable and not paying attention i had a slip off. So during my layoff due to injury I made the CCH3

Just as comfortable but with the easy on and off. Plus you can hang without a wrap if you choose to or use a

simple wrap.(less preparation)

Its safer also if there is a accidental slip-off.

Wish you luck on your hang and gains

4by4

hey guys read the first few posts….

the windows will enlarge the area that actually grips the penis.

When round the gripping part is about 1/8” and cut out about 1” making it more comfortable and giving a better hold.

whoops kinda skipped one page.

but glad I would have explained it the same way. LOL

Thanks anyway, Jelqinator!

Hey CC doesn’t that ACE bandage stuff hurt? tried it once got good grip but taking it off was a pain on the dick! I tried putting some baby powder on my dick before applying, worked better but after a couple uses the bandage won’t stick to itself anymore. So I use a washed piece of theraband, but I like how the ace performed. So any tips on the wrap?