Using the ultrasound for therapeutic heat in PE

Hi Kyrpa

Read through your whole thread and have a couple of questions. I plan to begin using your method in about a month after current decon break.
First, if I understand correctly, the 20 minute ultrasound phase begins AFTER adequate temperature (40-42C) is reached. Second, would all direction fulcrum stretching be appropriate for the 10 minute cool down period rather than static hanging. Third, I would like to incorporate light pumping 2-3 times/week, 2x10-15 minute sessions either ON or OFF days. Would like to know your thoughts.

Apologies if these questions have been answered aleady.

I received the proper load cell in the mail. I will try to fabricate a mounting bracket for my stress relaxation extender this weekend. “Know The Load.”

Without reading 60 pages, is there a favorite model to order for this use? Using an infrared lamp now but reading the first few pages here it seems like it may not be doing as much for preheating as I thought.

So you are willing to start using US without reading in about it and how to use it?

Read the two pages of explanation of why its better. Now would like to see what one of these machines costs, space requirements etc to see if its feasible for me to purchase one before I read through these other 58 pages for something that might not be a realistic possibility for me anyways. 👍

Google will tell you in a split second all the specifications of the machine my friend.

US Pro 2000 second edition.

Still too much going on in life to create and maintain a dedicated log but I do want to share some thoughts here for feedback.

I finally made a bracket, for the recommended load cell, and attached it to my stress relief extender (traction extender with the springs removed. Wow, I have been using way too much tension in the past.

For the first part of the protocol I used .5 kg for 10 mins. I would increase the strain to maintain .5 kg of force as my Dick relaxed and lengthened causing the force (tension) on my Dick to decrease. The next 7 mins I worked at 1 kg, then 1.5 and ended the 30 mins with a couple of mins at 2 kg of force. All of this was done under my IR heat lamp. I sat up in a chair. It was easy to see how the force/tension/load increased by going from a straight up position to straight out and a lot more when I moved the extender straight down. In general, the load cell readings jumped around a lot so I sat upright in a chair and rested the extender a stick which I placed across the top of my thighs.

Phase 2, I stared at 2kg and worked up to 3.5 kg. I had more difficulty getting into the therapeutic heat range and think it is just due to not being consistent in practice since I got a feel for it a few weeks ago. However, I also think I previously had better results with the therapeutic range because I was using applying too high of a load on my Dick and my Dick was more taught and a firmer surface to move the transducer over and apply some pressure with the transducer, 🤔. I did use my fingers on the dorsal side to assist and I will try the phantom again and use less tape.

I tried the gel phantom but it didn’t help much. I think it is because I had the dorsal side of my Dick almost fully covered with the crystal clear gorilla tape to hold the temperature probes.

I was excited to test the load cell setup and forgot to measure length. I definitely seemed to have put a higher strain on my Dick because I was closer to the end of the threaded rods. I think I will mark the rods so I can gauge strain while performing the protocol. The issue is that I put some tissue into the top of my vacuum cup in efforts to expose more of my shaft to the transducer so it is not a perfect means of measuring and has room for error but is another way to help gauge progress.

I will say the I enjoyed how my Dick got far down the extender and I barely felt tension in my Dick. I used to apply so much force or was if I was trying to rip my Dick off and my Dick would tense up and try to fight back. Stress Relaxation at the proper forces/load/tension is awesome. Less Is More.

During cool down, I maintained the final strain length from the US assisted portion of the protocol (I shut my IR lamp during phase 2 and 3 of the protocol). I read that the readings on the load cell should increase and I think it is because the Dick contracts as it cools and the strain length is fixed. This makes sense, however, the reading on my load cell was down to 1.5 kg at the end of the cool down.

I have to check out Kyrpa’s Excel sheet for force/load reconditions as well.

Any comments or feedback is always appreciated.

Why you guys remove springs from extender to do stress relaxation? I use extender with springs and spring tension just becomes less when dick relaxes. I start with 1 kg and after few mins there is less than that. I adjust back to 1 kg, after few mins there is less and so on.

How good of US phantom is silicone sleeve from autoextender or totalman or just any penis silicone sleeve? They are probably not thick enough but what if several layers of them are glued together making thickness over 10mm?

Hi kyrpa, can your theory with the use of ultrasound or heat be applied to pumping and clamping?

In an attempt to avoid an ultrasonic setup I’ve been stretching wrapped with an electric (low voltage) heat pad.

I’m managing a 2% strain when stretching like that.
I first cover all exposed skin with a silicone tube and wrap the pad around it. With a variable power supply I dial in a power level that is just a hair below uncomfortable.
For sure it takes longer to reach the optimal temperature but I’m fairly positive that I’m reaching at least 39C.

I stretch for about 30-40 minutes with ~4lb and keep it stretched afterwards for several hours at ~3lb.
The silicone tube restricts blood flow somewhat and keeps things comfortable.

Finally seeing some BPFSL gains after reaching a plateau when BPEL got too close to BPFSL.

I personally use the AWS fish scale and connect it to my vacuum chamber. By doing this, I can always ensure to have the same kg of pull when I want to measure.
By the way, I hit a horrible dead end with my old IR setup. My two US transducers arrived yesterday and when all the other stuff is here, I will also start the therapy in my log.
For anyone who wants to use IR instead of US, I cannot recommend it. As good as p1 was, p2 was absolutely devastating and horrible for me and a huge disappointment.
It confirms the notion that I am a hard gainer and Kyrpa has especially helped us guys a lot. The guys who simply have no other choice but to bring the big guns to the battle.

I have stopped taking pre measurements. I take only after workout. If I see gain there it’s good, if I don’t its not good.

What’s with AWS scales there seems to be many using them? I have “chinese weight scales ” digital fishing scale and it’s very accurate. 😄
Also have analog fishing scale that costed 5$ and that’s good too.

Anyone mind answering this. What’s the reason you guys remove springs?