Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Using the ultrasound for therapeutic heat in PE

Finally achieve awesome heating temps OTL and the temps held for along time during the cool down period.

I hope BPFSL gains will start. 🀞

Thank You for the support and feedback.
Any additional feedback is tremendously appreciated!!!

Stixman - Stixman’s Ultrasonic Adventure


Starting (07/15/20): BPEL 6.5” BPFSL 6.5” MSEG 4.75” BEG 4.75” BPFL 4.5”

Current (10/27/20): BPEL 7.0” BPFSL 7.5” MSEG 5.0”+ BEG 5.25” BPFL 5.25-5.75”

Goal: BPEL 7.5” MSEG 5.5” BEG 6.0” BPFL 6.5”

Originally Posted by BiggerPenis73
PBT 102 - 3 MHz Ultrasound Therapy Equipment | Pain Vanisher

Thoughts on the above option?

Also, using ultrasound during controlled priapism as an alternative to using it during clamping?

Hello,

Once again affodable machine which leaves more questions than answers.

You ahould email the seller and ask for:
- BNR
- The intensity at 100% duty cycle, If it is 2.5w/cm2 or not.

EDIT
The ERA of the tranducer head seems small at 2.5cm2


START 18/13.15 cm Jul 24th 18 (7.09/5.18") NOW 22.5/15.2 cm Fer 12th 20 (8.86/5.98") GOAL 8.5"/ 6"

When connective tissue is stretched within therapeutic temperatures ranging 102 to 110 F (38.9- 43.3 C), the amount of structural weakening produced by a given amount of tissue elongation varies inversely with the temperature. This is apparently related to the progressive increase in the viscous flow properties of the collagenous tissue when it is heated. (Warren et al (1971,1976)


Last edited by Kyrpa : 09-05-2021 at .

Originally Posted by BiggerPenis73
PBT 102 - 3 MHz Ultrasound Therapy Equipment | Pain Vanisher

Thoughts on the above option?

Also, using ultrasound during controlled priapism as an alternative to using it during clamping?

As for The second questions, we have no clue whatsoever.

Applying US to naturally occurring erection , you will end up flaccid.

I do wonder If the situation is no different with medication.
You will most probably end up clamping anyways.


START 18/13.15 cm Jul 24th 18 (7.09/5.18") NOW 22.5/15.2 cm Fer 12th 20 (8.86/5.98") GOAL 8.5"/ 6"

When connective tissue is stretched within therapeutic temperatures ranging 102 to 110 F (38.9- 43.3 C), the amount of structural weakening produced by a given amount of tissue elongation varies inversely with the temperature. This is apparently related to the progressive increase in the viscous flow properties of the collagenous tissue when it is heated. (Warren et al (1971,1976)

Stixman - Stixman’s Ultrasonic Adventure

I am 12 sessions in with ultrasound and still no gains.

I am not always able to perform the protocol 3 days on and 2 off.

Still, I would expect some gains. I listed some other ideas to try as far as troubleshooting.

REALLY FRUSTRATED

I have been achieving very good heating OTL.


Starting (07/15/20): BPEL 6.5” BPFSL 6.5” MSEG 4.75” BEG 4.75” BPFL 4.5”

Current (10/27/20): BPEL 7.0” BPFSL 7.5” MSEG 5.0”+ BEG 5.25” BPFL 5.25-5.75”

Goal: BPEL 7.5” MSEG 5.5” BEG 6.0” BPFL 6.5”

Thanks for the feedback, Rocco. I will keep

at it and look forward to stretching into unchartered territory in the coming weeks.


Starting (07/15/20): BPEL 6.5” BPFSL 6.5” MSEG 4.75” BEG 4.75” BPFL 4.5”

Current (10/27/20): BPEL 7.0” BPFSL 7.5” MSEG 5.0”+ BEG 5.25” BPFL 5.25-5.75”

Goal: BPEL 7.5” MSEG 5.5” BEG 6.0” BPFL 6.5”

Man this ultrasound thing makes all the sense in the world. I’m tempted to try it again. I got a US pro 2nd edition about a year ago, couldn’t get consistent heating. Got a fancy $800 machine, couldn’t get consistent heating. Got a cheap indian machine, couldn’t get consistent heating. I have a lot of confidence that if I could get a set up that was convenient, and most importantly, effective at heating, it would result in gains. I’m just frustrated with my inability so far to find a way to get the heating to work.

Originally Posted by BiggerPenis73
Man this ultrasound thing makes all the sense in the world. I’m tempted to try it again. I got a US pro 2nd edition about a year ago, couldn’t get consistent heating. Got a fancy $800 machine, couldn’t get consistent heating. Got a cheap indian machine, couldn’t get consistent heating. I have a lot of confidence that if I could get a set up that was convenient, and most importantly, effective at heating, it would result in gains. I’m just frustrated with my inability so far to find a way to get the heating to work.

It took me many tries to figure out how to properly apply the protocol to generate sufficient heat. It seems simple enough but it took me nearly a dozen sessions before I achieved really good heating levels.

There needs to be a similar medium on the other side of your dick. If you are apply the protocol OTL (Over The Leg), it helps if you have the area on your leg and dick shaved. Then put a shit load of ultrasound gel between your thigh and dick. Then put some more, it makes a big difference. The dorsal (back/top) side of your dick rests on your thigh and you apply the ultrasound transducer from the ventral (bottom).

Using a multi probe β€œK” style digital thermometer, with the probes taped to the dorsal side of your dick, on top of the septum. Without the ability to monitor temperature, it will not be easy to apply the science.

Good Luck.


Starting (07/15/20): BPEL 6.5” BPFSL 6.5” MSEG 4.75” BEG 4.75” BPFL 4.5”

Current (10/27/20): BPEL 7.0” BPFSL 7.5” MSEG 5.0”+ BEG 5.25” BPFL 5.25-5.75”

Goal: BPEL 7.5” MSEG 5.5” BEG 6.0” BPFL 6.5”

Originally Posted by Stixman
It took me many tries to figure out how to properly apply the protocol to generate sufficient heat. It seems simple enough but it took me nearly a dozen sessions before I achieved really good heating levels.

There needs to be a similar medium on the other side of your dick. If you are apply the protocol OTL (Over The Leg), it helps if you have the area on your leg and dick shaved. Then put a shit load of ultrasound gel between your thigh and dick. Then put some more, it makes a big difference. The dorsal (back/top) side of your dick rests on your thigh and you apply the ultrasound transducer from the ventral (bottom).

Using a multi probe β€œK” style digital thermometer, with the probes taped to the dorsal side of your dick, on top of the septum. Without the ability to monitor temperature, it will not be easy to apply the science.

Good Luck.

Are you using a single US pro transducer?

If I was to use the electric fish scale my guess is I would need to use an elastic band of some type that I can tighten in order to increase tension ? How would that set up work

If your issue is to achieve proper heating, do a trial run specifically to address that. Do not go with the ultrasound expecting to do a full session. Do a trial session without thinking about PE, do it strictly to accomplish the heating part while monitoring temperature.

Position yourself at the desired area, provide some tension to the penis to keep it stretched, position the penis where it will be throughout the protocol, apply US gel, apply US, measure temp and correct from there.


Period 1: 06/08/2020 BPFSL: 22cm (8.66") BPEL: 22cm (8.66") EG: 15.8cm (6.25") => 09/07/2020 BPFSL: 23.9cm (9.40")

Period 2: 05/01/2021 BPFSL: 24cm (9.44") BPEL: 22cm (8.66") EG: 15.8cm (6.25") => 07/24/2021 BPFSL: 25.4cm (10.00") BPEL: 23.5cm (9.25")

Goal: 1 Foot x 7.5 Inches (30.48cm x 19.05cm) NBPEL

Ok I ordered two US pro 2ed just now.. should be here tomorrow… Gonna give this another shot… with the two transducer method… Figure there’s no risk given Amazon’s free return policy…

Originally Posted by BiggerPenis73
Are you using a single US pro transducer?

I am now able to juggle 2 of them with success.
It helps a lot. Speaking of a lot, use a lot times ten regarding the amount of ultrasound gel you should use.


Starting (07/15/20): BPEL 6.5” BPFSL 6.5” MSEG 4.75” BEG 4.75” BPFL 4.5”

Current (10/27/20): BPEL 7.0” BPFSL 7.5” MSEG 5.0”+ BEG 5.25” BPFL 5.25-5.75”

Goal: BPEL 7.5” MSEG 5.5” BEG 6.0” BPFL 6.5”

Originally Posted by BiggerPenis73
Ok I ordered two US pro 2ed just now.. should be here tomorrow… Gonna give this another shot… with the two transducer method… Figure there’s no risk given Amazon’s free return policy…

Take Igigi’s advice when using 2 transducers. Use one for the top section of your shaft and the other for the bottom section. Keep them equidistant from each other or they can interfere with each other and not generate heat. When one transducer moves down the shaft, the other also moves down the shaft an equal distance. Make sure to maintain the maximum gap between the 2 transducers.

Use a ton of Ultrasound gel between you thigh and dick. Use a ton of gel between the transducers and dick. Then glob on a ton more.

It takes practice, patience and a thermometer to monitor and provide feedback.

Good Luck


Starting (07/15/20): BPEL 6.5” BPFSL 6.5” MSEG 4.75” BEG 4.75” BPFL 4.5”

Current (10/27/20): BPEL 7.0” BPFSL 7.5” MSEG 5.0”+ BEG 5.25” BPFL 5.25-5.75”

Goal: BPEL 7.5” MSEG 5.5” BEG 6.0” BPFL 6.5”

Originally Posted by Stixman
Take Igigi’s advice when using 2 transducers. Use one for the top section of your shaft and the other for the bottom section. Keep them equidistant from each other or they can interfere with each other and not generate heat. When one transducer moves down the shaft, the other also moves down the shaft an equal distance. Make sure to maintain the maximum gap between the 2 transducers.

Use a ton of Ultrasound gel between you thigh and dick. Use a ton of gel between the transducers and dick. Then glob on a ton more.

It takes practice, patience and a thermometer to monitor and provide feedback.

Good Luck

We’ll see what I can do

I’ve got some fat on my body, and my length isnt very long, and the vacuum cap plus silicone sleeve takes up nearly half of what length I do have, so I don’t really have much shaft to heat, and part of the shaft might not even be on my thigh due to the fat crease between my pubic area and thigh…

As far as massive gobs of US gel… The thing is the gel instantly smooches down to virtually nothing and then it’s just a mess around the area and not between the transducer and penis… I guess I could try to “float” the transducer up on top of a mound of gel.. but then the transducer wouldn’t be pressed against the skin…

Originally Posted by BiggerPenis73
We’ll see what I can do

I’ve got some fat on my body, and my length isnt very long, and the vacuum cap plus silicone sleeve takes up nearly half of what length I do have, so I don’t really have much shaft to heat, and part of the shaft might not even be on my thigh due to the fat crease between my pubic area and thigh…

As far as massive gobs of US gel… The thing is the gel instantly smooches down to virtually nothing and then it’s just a mess around the area and not between the transducer and penis… I guess I could try to “float” the transducer up on top of a mound of gel.. but then the transducer wouldn’t be pressed against the skin…

To expose more shaft, bunch up a piece of paper towel into my vacuum cup so that my glans to not go in as deep. After I roll down the silicone sleeve onto my shaft, I use a rubber band to hold it firmly in place on my shaft to maintain a good seal on my shaft just below the vacuum cup. I then flip, roll the silicon sleeve up in half and back onto the vacuum cup so that only a very small portion of the sleeve is on my shaft and the rubber band helps keep it sealed to my shaft. I keep the hose on my vacuum cup so I can quickly re-establish good vacuum incase there is a slight leak.

As far as the gel, it is a messy process so keep rags handy. Don’t float the transducer on a mound of gel, you still need to press down. Trust me, you need a shit ton of ultrasound gel in both sides of your dick. I struggled for about 10 sessions until I realized that what I thought was a lot really wasn’t. When I put a shit ton on, I finally achieved really good heating numbers.

I also place a wooden dowel through the metal ring of my vacuum cup so that my dick firmly stays in place with the dorsal (back side/top side) on my thigh. Sometimes a slight additional partial twist is extremely helpful and without the dowel the dick will not stay in that twisted position.

Shaving the dick and thigh help and monitoring temperature thought the protocol is imperative.

Good Luck


Starting (07/15/20): BPEL 6.5” BPFSL 6.5” MSEG 4.75” BEG 4.75” BPFL 4.5”

Current (10/27/20): BPEL 7.0” BPFSL 7.5” MSEG 5.0”+ BEG 5.25” BPFL 5.25-5.75”

Goal: BPEL 7.5” MSEG 5.5” BEG 6.0” BPFL 6.5”

Top

All times are GMT. The time now is 11:21 PM.