Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Using the ultrasound for therapeutic heat in PE

Turn it upside down and place a couple of drops of water on the head. Are they bouncing around? Also hold it in one place for several seconds and you should feel it start to heat up that spot.


Initial: 7” BPEL; 6” NBPEL; 5.25” - 5.5” MEG

Current: 7.5” BPEL; 7” NBPEL; 8.25” BPFSL; 6.25” - 6.5” MEG w/ c-ring.

Goal: Improved/consistent EQ while managing ED. Secondary: maintain current stats.

Originally Posted by 32quarters
Turn it upside down and place a couple of drops of water on the head. Are they bouncing around? Also hold it in one place for several seconds and you should feel it start to heat up that spot.

It definitely is bouncing around. Almost looks like the water is boiling. I tried it on my forearm for just a minute and I can’t really feel heat, but I can definitely feel my muscle reacting to the deep penetration. That’s the first time I’ve used it on a muscle and I can feel the ultrasound activity a lot better. My forearm muscle is still having a very slight spasm from just that little bit I used it.

@Kyrpa

I’m interested in starting this but I want to loop all the information into one place. Would you mind helping with the following areas?

- Devices to use:
(Was thinking US Pro 2000)

- Frequency of usage:
(How often we should be including US in our workouts)

- Method of usage:
(How we should be using the US in each individual workout)

- Positive signs:
(What we should look out to show we are doing it correctly)

Many thanks

Originally Posted by 7by5
@Kyrpa

I’m interested in starting this but I want to loop all the information into one place. Would you mind helping with the following areas?

- Devices to use:
(Was thinking US Pro 2000)

- Frequency of usage:
(How often we should be including US in our workouts)

- Method of usage:
(How we should be using the US in each individual workout)

- Positive signs:
(What we should look out to show we are doing it correctly)

Many thanks

I like this post because I would like a little summary too, I am going through everything I can find but confusing myself I think.

I posted some videos how to use it from some YouTube physical therapists here. The Long Game: Learning with Longerstretch, Key Principles to Make Sustained Growth

Kyrpa and manko are the experts and have been using US longer than me and understand it better than I. This thread has already gone over its uses pretty thoroughly but I will answer some questions.

1. I use the 3 mHz Delta machine from ebay. It’s made in India and works great for me, was around $250. I believe the US Pro might not be intense enough but Kyrpa did make great gains with his.
2. I use it every workout which currently is once a day about every other day. I think optimum would be 2-3 days on and 1-2 days off. I work in Healthcare so my schedule varies long hours and I do have a pandemic to contend with at the moment so I’m just doing what I can.
3. Covered here and in my thread. I precondition stretch then hang with US. Want to always do it while in a stretch and devices are going to be your best bet.
4. Deep heat within the area you are heating. Will take 5 to 10 min to really feel it. My last couple minutes are intense.


My MaxVac Setup Longerstretch's Golf Weight and HTW setup My Log

Starting Size: circa 2003: 5 BPEL x 5.0 MSEG August 2007: 6 2/3 BPEL x 5.5 MSEG 04/22/08: 7.5 BPEL x 5.6 MSEG... On and Off again for a while... 11/25/13: 7.75 BPEL x 5.75 MSEG 08/01/19 BPEL 8.03 x 5.6 10/01/19 BPEL 8.19 x 5.6

I have a Delta 3Hz machine too but also wonder about how effective it is. I seem to recall someone mentioning somewhere that there is a high degree of variability of output among different units. That some had small transducers inside and other had larger. Does anyone recall seeing something about that somewhere? TBH the machine feels kind of sketchy to me. The controls are confusing and it looks like it was made in the 70s. Would love to see more peoples’ experience with it but right now I am not feeling a lot of faith in the reliability of its settings (I.e., that what the display unit says it’s doing is really what it’s doing).

Krypa, I noticed you mentioned to move slowly but continuously. Can you say why slowly is better than quickly. Without that instruction I think I would more naturally be inclined to move it quickly and continuously. Just curious why you recommended slowly.

I have found a machine (in the uk) that’s 1mhz and highest setting is 1.2w/cm2, would this be enough?

Originally Posted by pudd1ng
I have found a machine (in the uk) that’s 1mhz and highest setting is 1.2w/cm2, would this be enough?

It is not enough according to Kyrpa’s experience, but you have to read the thread which contains the answers to all questions by now. I understand is a long thread, but I believe this is not something that you can just copycat. There are some risks involved and in order to do it safely you must understand the aspects involved and the mechanism of action of this therapy. Therefore it is very convenient and advisable to read all these threads involved.

I myself am starting in this, don’t have a machine yet, but I have been taking my time riding all the threads involving US therapy.

Originally Posted by igigi
It is not enough according to Kyrpa’s experience, but you have to read the thread which contains the answers to all questions by now. I understand is a long thread, but I believe this is not something that you can just copycat. There are some risks involved and in order to do it safely you must understand the aspects involved and the mechanism of action of this therapy. Therefore it is very convenient and advisable to read all these threads involved.

I myself am starting in this, don’t have a machine yet, but I have been taking my time riding all the threads involving US therapy.

I did read it but must have missed parts. After reading again I see it’s 1.6w minimum so yeah not enough. Limited options here in the uk and I’m a bit iffy ordering from the US at the moment with the postage here being upside down. Going to wait another month I think and have a short break then restart with us.

Not sure what machine to get but as far as I know the us pro 2000 is 1mhz 1.6w/cm2.

Originally Posted by pudd1ng
I did read it but must have missed parts. After reading again I see it’s 1.6w minimum so yeah not enough. Limited options here in the uk and I’m a bit iffy ordering from the US at the moment with the postage here being upside down. Going to wait another month I think and have a short break then restart with us.

Not sure what machine to get but as far as I know the us pro 2000 is 1mhz 1.6w/cm2.

A few guys have been buying a Delta machine from India which is 3mhz and I think put to 3.5w/cm2 which is plenty of power. This is the same machine I think I will go with. This is on eBay by the way.

Someone mentioned, though, that the delta machine might now always have the best transducer in it. I think someone was saying that sometimes it is small or something. Best to check back in the thread for details.

I wish someone would report some of their results! Would be great to see some updates on how people are doing.

I bought a delta machine, the 1 mhz version and it simply doesnt work. It doesnt heat the shaft with the waves, only the transducer head gets HOT and it burns the fucking skin, cant recommend this brand to anyone. It is better to expend more and get a quality machine, not some garbage from India.

Well, the one of the best machines for this purpose, the one Manko bought, is the Soundcare Plus but is $800. That is the problem, if you want quality and reliability it comes with a price. I personally do not support, do not care, do not recommend anything made in China. It is plain 100% high quality excrement. I say that because a lot of people have asked about some machines available at aliexpress and other sites, my opinion, I would not risk my health and integrity in a machine like that.

Now in the case of machines made in India like the Delta, the feedback I have had from people who bought it is that they are not perfectly accurate in their power output, but “good enough” for the purpose.

It is not easy. Not all of us have $800 bucks to pull out of the pocket for a machine that heat up your dick lol.

Originally Posted by eivbisi
I bought a delta machine, the 1 mhz version and it simply doesn’t work. It doesn’t heat the shaft with the waves, only the transducer head gets HOT and it burns the fucking skin, can’t recommend this brand to anyone. It is better to expend more and get a quality machine, not some garbage from India.

In the case of your 1Mhz machine, remember 1Mhz might not be effective for the internal penile tissues. 1Mhz goes too deep in the tissue. So theoretically, when you put it in your penis the waves are going through it to the other side and being wasted in the air. That is why you probably never felt an increase in temperature.

Kyrpa who started his research with a 1Mhz machine, used to lay his penis on his leg, with the intention of having the waves hit the leg and bounce back to the penis. He also used a heated rice sock to aid with temperature.

I am assuming you guys are reading every single thread completely. It is a lot of pages but this is not playing with play doh. There are risks involved and you must understand the science behind put out brilliantly by guys like Kyrpa and Manko who have done extensive tests.

In fact, it catch my attention that a lot of posts in these threads are redundant questions because people don’t read. Other posts are questioning methods that are already proven which in my opinion is ridiculous.

Kyrpa has very specifically laid out the routines, methods, materials, timings, everything needed to pretty much replicate his experience. He has also discussed with many members the necessary steps to further improve this therapy.

I am still hesitant with buying the Indian 3Mhz machine, and I am searching for other options.

Top

All times are GMT. The time now is 08:15 PM.