Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Gaining volume with Kyrpa

Originally Posted by dugtis
Hi, I’ve just discovered this thread and I feel an amazing and exciting potential. I’m planning to build my next routine using this protocol.
One question, what do you think about combining US with IR Heat Pad in the routine ?

Some people are doing that. In my opinion it would be a nice addition for keeping the temperature more stable and might even help to raise it a little. You could pre-warm your dick during the conditioning phase. However, make sure to use heat only after you have gone past your current BPEL.

Originally Posted by dugtis
Also, this thread is getting too long.. 100 pages to understand this complex protocol is a pain.
Kyrpa, wouldn’t be possible to make a sticky/locked thread, or maybe a PDF summarizing what’s principle are important to know, the product, the routine ect ? I would pay for this knowledge, honestly.

I agree. A summary as short as possible and as long as necessary would be nice. People asking questions that have already been answered could be sent there. Longerstretch has done that —> The Long Game: Learning with Longerstretch, Key Principles to Make Sustained Growth
I would love a summary with updated knowledge by Kyrpa, too. That takes time, of course, and he has done so much already.


11.01.2006: BPEL: 17,3 cm (6,8 inches), EG: 13,5 cm (5,3 inches)

03.11.2011: BPEL: 20,5 cm (8,1 inches), EG: 16 cm (6,3 inches)

-- For people who stopped gaining length --> Gaining volume 2 -- Progress log: Wurst's progress log --

I’m following this thread so obsessively that it’s crazy!

I’m waiting for people who never gained and tried the US to report new gains, but it doesn’t happen only some who gained in the past report new gains.

So I decided to take matters into my own hands and buy the machine to report for guys like me who are hungry for the smallest piece of hope for gains and a breakthrough.

I hope I can make a difference and prove myself and others like me that this is possible! Good luck!

Originally Posted by dugtis
Hi, I’ve just discovered this thread and I feel an amazing and exciting potential. I’m planning to build my next routine using this protocol.
One question, what do you think about combining US with IR Heat Pad in the routine ?

Also, this thread is getting too long.. 100 pages to understand this complex protocol is a pain.
Kyrpa, wouldn’t be possible to make a sticky/locked thread, or maybe a PDF summarizing what’s principle are important to know, the product, the routine ect ? I would pay for this knowledge, honestly.

Thanks dugtis for the compliments.

There are guys taking that approach already. In Manko007 progress log you can see him finding out that it took full 30 minutes to reach 40 C urethral temperature with IR heatpad of some sort.
There is reason to assume the septum remaining still under therapeutic temperature.

Yea, I think that also, the thread is already awfully long.

Originally Posted by wurst

I would love a summary with updated knowledge by Kyrpa, too. That takes time, of course, and he has done so much already.


Here is what I am thinking of. I am on post decon recovery campaign to restore the lost gains during the break. I will be wrapping up the first chapter of this PE journey in this log with a report of the latest doings.
Then for the next chapter I intend to open a new log with a prologue as a introduction to the concept and a review of the state of the protocols.


START 18/13.15 cm Jul 24th 18 (7.09/5.18") NOW 22.5/15.2 cm Fer 12th 20 (8.86/5.98") GOAL 8.5"/ 6"

When connective tissue is stretched within therapeutic temperatures ranging 102 to 110 F (38.9- 43.3 C), the amount of structural weakening produced by a given amount of tissue elongation varies inversely with the temperature. This is apparently related to the progressive increase in the viscous flow properties of the collagenous tissue when it is heated. (Warren et al (1971,1976)

Originally Posted by Kyrpa
Then for the next chapter I intend to open a new log with a prologue as a introduction to the concept and a review of the state of the protocols.

Tremendously Appreciated!!! A concise guide to your protocols and methods would be amazing.

I really appreciate everything you have helped pioneer and share. I do intend to read through all of your logs to better understand the science, research, trial and tribulations and the path of your journey. However, an efficient guide is very helpful to make sure the recipe and be repeated.

Thanks Again and I hope you did not lose much on your decon and it is easy for you to restore. It is quite amazing how much volume you have gained.


Starting (07/15/20): BPEL 6.5” BPFSL 6.5” MSEG 4.75” BEG 4.75” BPFL 4.5”

Current (10/27/20): BPEL 7.0” BPFSL 7.5” MSEG 5.0”+ BEG 5.25” BPFL 5.25-5.75”

Goal: BPEL 7.5” MSEG 5.5” BEG 6.0” BPFL 6.5”

Originally Posted by Stixman

Thanks Again and I hope you did not lose much on your decon and it is easy for you to restore. It is quite amazing how much volume you have gained.

Restoring is always rather easy for legit gains, as it has been proven many times before despite the approach used.

I did lost ~ 0.9-1.0 cm in + 5 months and I am halfway back with ridiculously carefree routines. I have not been even consistent with workouts nor schedule.

I am convinced that I wont be the highest gainer with these tools. There will be some stupendous results when some of the easy gainers jump on the wagon from the scratch.
Anyways my gains are irrelevant now that there are many guys already trying to emulate the concept. We are not here for the sake of being the biggest cock carrier or the top gainer of all times. At least we shouldn´t.


START 18/13.15 cm Jul 24th 18 (7.09/5.18") NOW 22.5/15.2 cm Fer 12th 20 (8.86/5.98") GOAL 8.5"/ 6"

When connective tissue is stretched within therapeutic temperatures ranging 102 to 110 F (38.9- 43.3 C), the amount of structural weakening produced by a given amount of tissue elongation varies inversely with the temperature. This is apparently related to the progressive increase in the viscous flow properties of the collagenous tissue when it is heated. (Warren et al (1971,1976)

Originally Posted by Benmush
I’m following this thread so obsessively that it’s crazy!
I’m waiting for people who never gained and tried the US to report new gains, but it doesn’t happen only some who gained in the past report new gains.
So I decided to take matters into my own hands and buy the machine to report for guys like me who are hungry for the smallest piece of hope for gains and a breakthrough.
I hope I can make a difference and prove myself and others like me that this is possible! Good luck!

Hopefully it is you to convince yourself. To do this successfully you need to emphasize on understanding and the execution of the concept.
There are individual elements as well and having the ability to adapt to the environment is crucial for the optimal outcome.
Wishing productive journey for you.


START 18/13.15 cm Jul 24th 18 (7.09/5.18") NOW 22.5/15.2 cm Fer 12th 20 (8.86/5.98") GOAL 8.5"/ 6"

When connective tissue is stretched within therapeutic temperatures ranging 102 to 110 F (38.9- 43.3 C), the amount of structural weakening produced by a given amount of tissue elongation varies inversely with the temperature. This is apparently related to the progressive increase in the viscous flow properties of the collagenous tissue when it is heated. (Warren et al (1971,1976)

To all those passionately following this thread and this breakthrough, I recommend to read every single page of this thread, and Manko’s thread. I know its a lot of pages, some posts might not been significant or relevant, but believe me, there is HIGHLY valuable information all along. It will clear all your doubts and questions, and trust me, it makes a big difference to apply this novel technology while understanding it completely.

My advise, set yourself the goal of simply reading and understanding 2-3 pages at a time. Read all the posts, understand the conversation, concepts, graphics, tests, etc. Just take your time 2-3 pages at a time per day. In a month you will have pretty much the whole thread covered, while in the process you go buying and gathering your materials for the therapy.


Period 1: 06/08/2020 BPFSL: 22cm (8.66") BPEL: 22cm (8.66") EG: 15.8cm (6.25") => 09/07/2020 BPFSL: 23.9cm (9.40")

Period 2: 05/01/2021 BPFSL: 24cm (9.44") BPEL: 22cm (8.66") EG: 15.8cm (6.25") => 07/24/2021 BPFSL: 25.4cm (10.00") BPEL: 23.5cm (9.25")

Goal: 1 Foot x 7.5 Inches (30.48cm x 19.05cm) NBPEL

Originally Posted by pudd1ng
This is very interesting because I’m currently on a deacon then I’m going to focus on girth, I’m convinced I need to fill the gap now. My Bpel is 7.4” and my bpfsl now is over 8.4”.

Kyrpa I’m unsure what to do with this though do you have any recommendations on what to start with or experiment with, I’m up for experimenting.

I have clamps, same us machine as you (just one), LG, bib hangers and I could buy a pump too.

Also I’m the same as you, thinner behind glans than mid shaft, maybe that’s a thing guys with the cord have in common?

Everybody has “the cord”. It is called septum. Whats different here is that some people have toughened their septum and others were born with a tough septum.


Period 1: 06/08/2020 BPFSL: 22cm (8.66") BPEL: 22cm (8.66") EG: 15.8cm (6.25") => 09/07/2020 BPFSL: 23.9cm (9.40")

Period 2: 05/01/2021 BPFSL: 24cm (9.44") BPEL: 22cm (8.66") EG: 15.8cm (6.25") => 07/24/2021 BPFSL: 25.4cm (10.00") BPEL: 23.5cm (9.25")

Goal: 1 Foot x 7.5 Inches (30.48cm x 19.05cm) NBPEL

Originally Posted by igigi
To all those passionately following this thread and this breakthrough, I recommend to read every single page of this thread, and Manko’s thread. I know its a lot of pages, some posts might not been significant or relevant, but believe me, there is HIGHLY valuable information all along. It will clear all your doubts and questions, and trust me, it makes a big difference to apply this novel technology while understanding it completely.

My advise, set yourself the goal of simply reading and understanding 2-3 pages at a time. Read all the posts, understand the conversation, concepts, graphics, tests, etc. Just take your time 2-3 pages at a time per day. In a month you will have pretty much the whole thread covered, while in the process you go buying and gathering your materials for the therapy.

I agree with that, totally.


11.01.2006: BPEL: 17,3 cm (6,8 inches), EG: 13,5 cm (5,3 inches)

03.11.2011: BPEL: 20,5 cm (8,1 inches), EG: 16 cm (6,3 inches)

-- For people who stopped gaining length --> Gaining volume 2 -- Progress log: Wurst's progress log --

Anyone know where to get an infrared heating pad?


well… if this guy sells it , it has to be somewhere else cheaper as im sure he is not making the product. Ive tried to look on aliexpress but i cannot find it.

Also it doesnt look as infrared because every ir heatpad out there seems to have some kind of "LEDS"(I know theyre not leds but kinda similar) on the surface of the pad

Wurst, thanks for the TCA advice to lighten the hemosiderin pigmentation. I am now trying to alternate iodine (lugol’s) + DMSO (70%) and ascorbic acid + DMSO and see some lightening without any skin rashes or shedding.

After the last 10 US sessions I have seen zero gain in stretched length and after each session the stretch is almost unmeasurable (1-2 mm) whereas at the beginning it was 3-6 mm. I wonder if a decon break is in order or maybe I should try some variation. I feel that it would be better to keep a larger portion at the desired temperature for longer. Currently I use only US and it can effectively heat up only a third of the length at a time. Maybe will try combining it with IR although it would be cumbersome.

Has anybody compared TDP lamp with terrarium ceramic bulbs?

Originally Posted by Azazello
Wurst, thanks for the TCA advice to lighten the hemosiderin pigmentation. I am now trying to alternate iodine (lugol’s) + DMSO (70%) and ascorbic acid + DMSO and see some lightening without any skin rashes or shedding.

After the last 10 US sessions I have seen zero gain in stretched length and after each session the stretch is almost unmeasurable (1-2 mm) whereas at the beginning it was 3-6 mm. I wonder if a decon break is in order or maybe I should try some variation. I feel that it would be better to keep a larger portion at the desired temperature for longer. Currently I use only US and it can effectively heat up only a third of the length at a time. Maybe will try combining it with IR although it would be cumbersome.

Has anybody compared TDP lamp with terrarium ceramic bulbs?

Would you remind us how long have you been on the protocol and do you have what kind of overall gains?
After certain point the gains do stop, it might be as related to timeline as it is for total gains.

For what I have been seeing is that whole shaft heat brings better result when applying straight stretch. If using fulcrum the partial heating could be very promising.

And for the wurst blonding campaign , I am curious to try as well if necessary.


START 18/13.15 cm Jul 24th 18 (7.09/5.18") NOW 22.5/15.2 cm Fer 12th 20 (8.86/5.98") GOAL 8.5"/ 6"

When connective tissue is stretched within therapeutic temperatures ranging 102 to 110 F (38.9- 43.3 C), the amount of structural weakening produced by a given amount of tissue elongation varies inversely with the temperature. This is apparently related to the progressive increase in the viscous flow properties of the collagenous tissue when it is heated. (Warren et al (1971,1976)

60 sessions in 20 weeks, 30-40 min each at 10W 3MHz US. 1.2-1.5 kg load. No IR heat is used. I have a 150W ceramic bulb emitter, will try to add it later in parallel, maybe replace it with 250W if necessary.

I am able to get the whole unit warm but only about a 2” length gets hot at a time when I massage one small section in circular motion. Hot means the skin on the thigh under it gets pink and I feel the warmth coming through. When the heat in the unit becomes unpleasant, then I move on to a different area. Takes about 5 min per area. Warm up with US takes about 15 min, then targeted heating for 15-25 min.

No other protocol used. Gained 15 mm stretched length, no other gains. EQ is good, no soreness.

I looked at IR heat sorces. Ideal is ceramic-carbon plates at 8 microns and 200F surface. Pure carbon plates are 10 microns and 140F surface. Pure ceramic heaters are compact, peak at 4-5 microns (most of the spectrum is 2-10 microns) and reach 400-500F. Quartz is inferior with the peak is at 1-3 microns. I think TDP lamps are similar.


Last edited by Azazello : 11-24-2020 at .
Top

All times are GMT. The time now is 06:48 PM.